- 吸水率 [%]: 0.07
- 缺口沖擊強(qiáng)度: 1.01
- 彎曲模量 [MPa]: 6.89
- 硬度: 109.0
- 熱變形溫度 [℃]: 215.0
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Specific Gravity | 1.51 g/cc | 1.51 g/cc | ASTM D792 | ||
| Water Absorption | 0.070 % @Time 86400 sec | 0.070 % @Time 24.0 hour | ASTM D570 | ||
| Linear Mold Shrinkage, Flow | 0.0030 - 0.0040 cm/cm @Thickness 1.50 - 3.20 mm | 0.0030 - 0.0040 in/in @Thickness 0.0591 - 0.126 in | SABIC Method | ||
| 0.0040 - 0.0060 cm/cm @Thickness 3.20 - 4.60 mm | 0.0040 - 0.0060 in/in @Thickness 0.126 - 0.181 in | SABIC Method | |||
| Linear Mold Shrinkage, Transverse | 0.0040 - 0.0060 cm/cm @Thickness 1.50 - 3.20 mm | 0.0040 - 0.0060 in/in @Thickness 0.0591 - 0.126 in | SABIC Method | ||
| 0.0060 - 0.0080 cm/cm @Thickness 3.20 - 4.60 mm | 0.0060 - 0.0080 in/in @Thickness 0.126 - 0.181 in | SABIC Method | |||
| Mechanical Properties | Metric | English | Comments | ||
| Hardness, Rockwell R | 109 | 109 | ASTM D785 | ||
| Tensile Strength at Break | 82.0 MPa | 11900 psi | Type I, 5 mm/min; ASTM D638 | ||
| Elongation at Break | 2.0 % | 2.0 % | Type I, 5 mm/min; ASTM D638 | ||
| Flexural Strength | 124 MPa | 18000 psi | brk, 1.3 mm/min, 50 mm span; ASTM D790 | ||
| Flexural Modulus | 6.89 GPa | 999 ksi | 1.3 mm/min, 50 mm span; ASTM D790 | ||
| Izod Impact, Notched | 1.01 J/cm | 1.89 ft-lb/in | ASTM D256 | ||
| Izod Impact, Unnotched | 5.34 J/cm | 10.0 ft-lb/in | ASTM D4812 | ||
| Electrical Properties | Metric | English | Comments | ||
| Volume Resistivity | 1.00e+17 ohm-cm | 1.00e+17 ohm-cm | ASTM D257 | ||
| Dielectric Constant | 3.32 @Frequency 1.00e+6 Hz | 3.32 @Frequency 1.00e+6 Hz | ASTM D150 | ||
| 3.53 @Frequency 50.0 - 60.0 Hz | 3.53 @Frequency 50.0 - 60.0 Hz | ASTM D150 | |||
| Dielectric Strength | 17.9 kV/mm @Thickness 3.20 mm | 455 kV/in @Thickness 0.126 in | in oil; ASTM D149 | ||
| Dissipation Factor | 0.0080 @Frequency 50.0 - 60.0 Hz | 0.0080 @Frequency 50.0 - 60.0 Hz | ASTM D150 | ||
| 0.013 @Frequency 1.00e+6 Hz | 0.013 @Frequency 1.00e+6 Hz | ASTM D150 | |||
| Thermal Properties | Metric | English | Comments | ||
| CTE, linear, Parallel to Flow | 25.2 μm/m-°C @Temperature -40.0 - 40.0 °C | 14.0 μin/in-°F @Temperature -40.0 - 104 °F | ASTM E 831 | ||
| 25.2 μm/m-°C @Temperature 60.0 - 138 °C | 14.0 μin/in-°F @Temperature 140 - 280 °F | ASTM E 831 | |||
| Deflection Temperature at 0.46 MPa (66 psi) | 215 °C @Thickness 6.40 mm | 419 °F @Thickness 0.252 in | unannealed; ASTM D648 | ||
| Deflection Temperature at 1.8 MPa (264 psi) | 198 °C @Thickness 6.40 mm | 388 °F @Thickness 0.252 in | unannealed; ASTM D648 | ||
| Descriptive Properties | |||||
| Specific Volume | 0.66cm^3/g | ASTM D792 | |||