- 密度 [g/cm3]: 1.79
- 吸水率 [%]: 0.04
- 缺口沖擊強度: 0.68
- 斷裂伸長率 [%]: 177
- 彎曲強度 [MPa]: 118.4
- 彎曲模量 [MPa]: 10.72
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.79 g/cc | 0.0647 lb/in3 | ASTM D792 |
| Water Absorption | 0.040 % | 0.040 % | ASTM D570 |
| Linear Mold Shrinkage | 0.0012 cm/cm | 0.0012 in/in | ATM D955 |
| Mechanical Properties | Metric | English | Comments |
| Tensile Strength, Ultimate | 118.4 MPa | 17170 psi | ASTM D638 |
| Elongation at Break | 1.7 % | 1.7 % | ASTM D638 |
| Tensile Modulus | 11.53 GPa | 1672 ksi | ASTM D638 |
| Flexural Yield Strength | 177 MPa | 25700 psi | ASTM D790 |
| Flexural Modulus | 10.72 GPa | 1555 ksi | ASTM D790 |
| Compressive Yield Strength | 161.8 MPa | 23470 psi | ASTM D695 |
| Izod Impact, Notched | 0.680 J/cm | 1.27 ft-lb/in | ASTM D256 |
| Electrical Properties | Metric | English | Comments |
| Electrical Resistivity | 1.0778e+16 ohm-cm | 1.0778e+16 ohm-cm | ASTM D257 |
| Dielectric Constant | 3.8 @Frequency 1e+6 Hz | 3.8 @Frequency 1e+6 Hz | ASTM D150 |
| Dielectric Strength | 14.0 kV/mm | 356 kV/in | Short Time; ASTM D149 |
| Dissipation Factor | 0.046 @Frequency 1e+6 Hz | 0.046 @Frequency 1e+6 Hz | ASTM D150 |
| Arc Resistance | 50 sec | 50 sec | ASTM D495 |
| Comparative Tracking Index | 200 V | 200 V | ASTM D3638 |
| Thermal Properties | Metric | English | Comments |
| Deflection Temperature at 1.8 MPa (264 psi) | 215 °C | 419 °F | ASTM D648 |
| Flammability, UL94 | V-0 @Thickness 1.47 mm | V-0 @Thickness 0.0579 in | |
- 關鍵詞:
- PET
- black
- 供應
- Injection Molded
- Pellet
- Plenco 51240 PET