- 密度 [g/cm3]: 1.63
- 吸水率 [%]: 0.06
- 缺口沖擊強(qiáng)度: 0.49
- 斷裂伸長率 [%]: 164.6
- 彎曲強(qiáng)度 [MPa]: 111.7
- 彎曲模量 [MPa]: 8.69
- 硬度: 21.0
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.63 g/cc | 0.0589 lb/in3 | ASTM D792 |
| Water Absorption | 0.060 % | 0.060 % | ASTM D570 |
| Linear Mold Shrinkage | 0.0015 cm/cm | 0.0015 in/in | ATM D955 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Rockwell R | 21 | 21 | ASTM D785 |
| Tensile Strength, Ultimate | 111.7 MPa | 16200 psi | ASTM D638 |
| Elongation at Break | 1.36 % | 1.36 % | ASTM D638 |
| Tensile Modulus | 9.29 GPa | 1350 ksi | ASTM D638 |
| Flexural Yield Strength | 164.6 MPa | 23870 psi | ASTM D790 |
| Flexural Modulus | 8.69 GPa | 1260 ksi | ASTM D790 |
| Compressive Yield Strength | 168.9 MPa | 24500 psi | ASTM D695 |
| Izod Impact, Notched | 0.490 J/cm | 0.918 ft-lb/in | ASTM D256 |
| Electrical Properties | Metric | English | Comments |
| Electrical Resistivity | 9.90e+15 ohm-cm | 9.90e+15 ohm-cm | ASTM D257 |
| Dielectric Constant | 3.4 @Frequency 1e+6 Hz | 3.4 @Frequency 1e+6 Hz | ASTM D150 |
| Dielectric Strength | 15.1 kV/mm | 384 kV/in | Short Time; ASTM D149 |
| Dissipation Factor | 0.013 @Frequency 1e+6 Hz | 0.013 @Frequency 1e+6 Hz | ASTM D150 |
| Arc Resistance | 30 sec | 30 sec | ASTM D495 |
| Comparative Tracking Index | 225 V | 225 V | ASTM D3638 |
| Thermal Properties | Metric | English | Comments |
| Deflection Temperature at 1.8 MPa (264 psi) | 215 °C | 419 °F | ASTM D648 |
| Flammability, UL94 | HB @Thickness 1.47 mm | HB @Thickness 0.0579 in | |
- 關(guān)鍵詞:
- PET
- black
- 供應(yīng)
- Injection Molded
- Pellet
- Plenco 51335 PET