- 密度 [g/cm3]: 1.79
- 吸水率 [%]: 0.02
- 缺口沖擊強(qiáng)度: 0.69
- 斷裂伸長率 [%]: 176.1
- 彎曲強(qiáng)度 [MPa]: 115.1
- 彎曲模量 [MPa]: 10.33
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.79 g/cc | 0.0647 lb/in3 | ASTM D792 |
| Water Absorption | 0.020 % | 0.020 % | ASTM D570 |
| Linear Mold Shrinkage | 0.00060 cm/cm | 0.00060 in/in | ATM D955 |
| Mechanical Properties | Metric | English | Comments |
| Tensile Strength, Ultimate | 115.1 MPa | 16690 psi | ASTM D638 |
| Elongation at Break | 1.6 % | 1.6 % | ASTM D638 |
| Tensile Modulus | 10.76 GPa | 1561 ksi | ASTM D638 |
| Flexural Yield Strength | 176.1 MPa | 25540 psi | ASTM D790 |
| Flexural Modulus | 10.33 GPa | 1498 ksi | ASTM D790 |
| Compressive Yield Strength | 143.6 MPa | 20830 psi | ASTM D695 |
| Izod Impact, Notched | 0.690 J/cm | 1.29 ft-lb/in | ASTM D256 |
| Electrical Properties | Metric | English | Comments |
| Electrical Resistivity | 8.71e+15 ohm-cm | 8.71e+15 ohm-cm | ASTM D257 |
| Dielectric Constant | 3.8 @Frequency 1e+6 Hz | 3.8 @Frequency 1e+6 Hz | ASTM D150 |
| Dielectric Strength | 16.7 kV/mm | 424 kV/in | Short Time; ASTM D149 |
| Dissipation Factor | 0.013 @Frequency 1e+6 Hz | 0.013 @Frequency 1e+6 Hz | ASTM D150 |
| Arc Resistance | 30 sec | 30 sec | ASTM D495 |
| Comparative Tracking Index | 225 V | 225 V | ASTM D3638 |
| Thermal Properties | Metric | English | Comments |
| Deflection Temperature at 1.8 MPa (264 psi) | 220 °C | 428 °F | ASTM D648 |
| Flammability, UL94 | V-0 @Thickness 1.47 mm | V-0 @Thickness 0.0579 in | |
- 關(guān)鍵詞:
- PET
- 供應(yīng)
- Injection Molded
- Pellet
- Natural Color
- Plenco 51240 PET