- 密度 [g/cm3]: 1.64
- 吸水率 [%]: 0.05
- 缺口沖擊強(qiáng)度: 0.56
- 斷裂伸長率 [%]: 179.3
- 彎曲強(qiáng)度 [MPa]: 120.5
- 彎曲模量 [MPa]: 9.04
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.64 g/cc | 0.0592 lb/in3 | ASTM D792 |
| Water Absorption | 0.050 % | 0.050 % | ASTM D570 |
| Linear Mold Shrinkage | 0.0018 cm/cm | 0.0018 in/in | ATM D955 |
| Mechanical Properties | Metric | English | Comments |
| Tensile Strength, Ultimate | 120.5 MPa | 17480 psi | ASTM D638 |
| Elongation at Break | 1.81 % | 1.81 % | ASTM D638 |
| Tensile Modulus | 9.47 GPa | 1370 ksi | ASTM D638 |
| Flexural Yield Strength | 179.3 MPa | 26010 psi | ASTM D790 |
| Flexural Modulus | 9.04 GPa | 1310 ksi | ASTM D790 |
| Compressive Yield Strength | 172.7 MPa | 25050 psi | ASTM D695 |
| Izod Impact, Notched | 0.560 J/cm | 1.05 ft-lb/in | ASTM D256 |
| Electrical Properties | Metric | English | Comments |
| Electrical Resistivity | 3.96e+17 ohm-cm | 3.96e+17 ohm-cm | ASTM D257 |
| Dielectric Constant | 3.5 @Frequency 1e+6 Hz | 3.5 @Frequency 1e+6 Hz | ASTM D150 |
| Dielectric Strength | 17.3 kV/mm | 439 kV/in | Short Time; ASTM D149 |
| Dissipation Factor | 0.013 @Frequency 1e+6 Hz | 0.013 @Frequency 1e+6 Hz | ASTM D150 |
| Arc Resistance | 70 sec | 70 sec | ASTM D495 |
| Comparative Tracking Index | 250 V | 250 V | ASTM D3638 |
| Thermal Properties | Metric | English | Comments |
| Maximum Service Temperature, Air | 224 °C | 435 °F | Heat resistance per ASTM D794 |
| Deflection Temperature at 1.8 MPa (264 psi) | 218 °C | 424 °F | ASTM D648 |
| Flammability, UL94 | HB @Thickness 1.47 mm | HB @Thickness 0.0579 in | |
- 關(guān)鍵詞:
- PET
- 供應(yīng)
- White
- Injection Molded
- Pellet
- Plenco 50335 PET