- 密度 [g/cm3]: 1.53
- 彎曲模量 [MPa]: 7.00
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Bulk Density | 0.450 - 0.550 g/cc | 0.0163 - 0.0199 lb/in3 | Powder Density; ISO 60 | ||
| Density | 1.53 g/cc | 0.0553 lb/in3 | Relative Density; ISO 1183 | ||
| Linear Mold Shrinkage | 0.0070 - 0.0080 cm/cm | 0.0070 - 0.0080 in/in | Injection Molding; ISO 2577 | ||
| Mechanical Properties | Metric | English | Comments | ||
| Tensile Strength at Break | 50.0 - 60.0 MPa | 7250 - 8700 psi | ISO 527 | ||
| Elongation at Break | 0.75 - 0.85 % | 0.75 - 0.85 % | Tensile; ISO 527 | ||
| 1.3 - 1.5 % | 1.3 - 1.5 % | Flexure; ISO 178 | |||
| Tensile Modulus | 8.50 - 10.0 GPa | 1230 - 1450 ksi | ISO 527 | ||
| Flexural Strength | 120 - 130 MPa | 17400 - 18900 psi | At Rupture; ISO 178 | ||
| Flexural Modulus | 7.00 - 9.00 GPa | 1020 - 1310 ksi | ISO 178 | ||
| Compressive Strength | 200 - 230 MPa | 29000 - 33400 psi | ISO 604 | ||
| Charpy Impact Unnotched | 0.850 - 1.00 J/cm2 | 4.05 - 4.76 ft-lb/in2 | ISO 179 | ||
| Charpy Impact, Notched | 0.350 - 0.450 J/cm2 | 1.67 - 2.14 ft-lb/in2 | ISO 179 | ||
| Electrical Properties | Metric | English | Comments | ||
| Dielectric Strength | 25.0 kV/mm | 635 kV/in | IEC 243 | ||
| Comparative Tracking Index | 175 V | 175 V | IEC 112 | ||
| Thermal Properties | Metric | English | Comments | ||
| CTE, linear, Parallel to Flow | 45.0 - 55.0 μm/m-°C @Temperature 20.0 °C | 25.0 - 30.6 μin/in-°F @Temperature 68.0 °F | TMA | ||
| CTE, linear, Transverse to Flow | 55.0 - 65.0 μm/m-°C @Temperature 20.0 °C | 30.6 - 36.1 μin/in-°F @Temperature 68.0 °F | TMA | ||
| Deflection Temperature at 1.8 MPa (264 psi) | 155 - 175 °C | 311 - 347 °F | ISO 75 A | ||
| Deflection Temperature at 8.0 MPa | 130 - 150 °C | 266 - 302 °F | ISO 75 C | ||
| Flammability, UL94 | V-1 @Thickness 1.60 mm | V-1 @Thickness 0.0630 in | |||
| V-0 @Thickness 4.00 mm | V-0 @Thickness 0.157 in | ||||
| Shrinkage | 0.20 - 0.30 % | 0.20 - 0.30 % | Post Shrinkage; ISO 2577 | ||
| Descriptive Properties | |||||
| Color | Black | ||||
| ISO type | PF 2 C3 | ||||
| Main Filler | Mineral & Organic | ||||
| Molding Method | Compression, transfer, injection | ||||