- 密度 [g/cm3]: 1.45
- 吸水率 [%]: 0.29
- 缺口沖擊強度: 0.257
- 彎曲強度 [MPa]: 56.0
- 彎曲模量 [MPa]: 7.40
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Bulk Density | 0.560 g/cc | 0.0202 lb/in3 | ASTM D1895 |
| Density | 1.45 g/cc | 0.0524 lb/in3 | ASTM D792 |
| Water Absorption | 0.29 % | 0.29 % | ASTM D570 |
| Linear Mold Shrinkage | 0.0072 cm/cm | 0.0072 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Rockwell E | 82 | 82 | ASTM D785 |
| Tensile Strength, Ultimate | 56.0 MPa | 8120 psi | ASTM D638 |
| Elongation at Break | 0.86 % | 0.86 % | ASTM D638 |
| Tensile Modulus | 8.50 GPa | 1230 ksi | ASTM D638 |
| Flexural Strength | 79.0 MPa | 11500 psi | ASTM D790 |
| Flexural Modulus | 7.40 GPa | 1070 ksi | ASTM D790 |
| Compressive Strength | 196 MPa | 28400 psi | ASTM D695 |
| Izod Impact, Notched | 0.257 J/cm | 0.481 ft-lb/in | ASTM D256 |
| Charpy Impact, Notched | 0.256 J/cm2 | 1.22 ft-lb/in2 | ASTM D256 |
| Impact | 193 | 193 | J/m drop Ball Impact; PLENCO |
| Electrical Properties | Metric | English | Comments |
| Volume Resistivity | 1.50e+11 ohm-cm | 1.50e+11 ohm-cm | ASTM D247 |
| Dielectric Constant | 5.3 | 5.3 | ASTM D150 |
| Dielectric Strength | 10.2 kV/mm | 259 kV/in | Short Time; ASTM D149 |
| Dissipation Factor | 0.065 | 0.065 | ASTM D150 |
| Arc Resistance | 155 sec | 155 sec | ASTM D495 |
| Comparative Tracking Index | 175 V | 175 V | ASTM D3638 |
| Thermal Properties | Metric | English | Comments |
| Thermal Conductivity | 0.420 W/m-K @Temperature 100 °C | 2.91 BTU-in/hr-ft2-°F @Temperature 212 °F | ASTM E1461 |
| Maximum Service Temperature, Air | 197 °C | 387 °F | Heat Resistance; ASTM D570D |
| Deflection Temperature at 1.8 MPa (264 psi) | 178 °C | 352 °F | ASTM D648 |
| Flammability, UL94 | V-0 @Thickness 4.30 mm | V-0 @Thickness 0.169 in | |
| Shrinkage | 0.34 % | 0.34 % | 72 hr, 120oC; ASTM D1299 |