- 密度 [g/cm3]: 1.46
- 吸水率 [%]: 0.18
- 缺口沖擊強度: 0.31
- 彎曲強度 [MPa]: 37.0
- 彎曲模量 [MPa]: 7.50
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Bulk Density | 0.610 g/cc | 0.0220 lb/in3 | ASTM D1895 |
| Density | 1.46 g/cc | 0.0527 lb/in3 | ASTM D792 |
| Water Absorption | 0.18 % | 0.18 % | ASTM D570 |
| Linear Mold Shrinkage | 0.0057 cm/cm | 0.0057 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Rockwell E | 77 | 77 | ASTM D785 |
| Tensile Strength, Ultimate | 37.0 MPa | 5370 psi | ASTM D638 |
| Elongation at Break | 0.53 % | 0.53 % | ASTM D638 |
| Tensile Modulus | 8.40 GPa | 1220 ksi | ASTM D638 |
| Flexural Strength | 75.0 MPa | 10900 psi | ASTM D790 |
| Flexural Modulus | 7.50 GPa | 1090 ksi | ASTM D790 |
| Compressive Strength | 175 MPa | 25400 psi | ASTM D695 |
| Izod Impact, Notched | 0.310 J/cm | 0.581 ft-lb/in | ASTM D256 |
| Charpy Impact, Notched | 0.310 J/cm2 | 1.48 ft-lb/in2 | ASTM D256 |
| Impact | 150 | 150 | J/m drop Ball Impact; PLENCO |
| Electrical Properties | Metric | English | Comments |
| Volume Resistivity | 3.60e+10 ohm-cm | 3.60e+10 ohm-cm | ASTM D247 |
| Dielectric Constant | 5.9 | 5.9 | ASTM D150 |
| Dielectric Strength | 6.30 kV/mm | 160 kV/in | Short Time; ASTM D149 |
| Dissipation Factor | 0.071 | 0.071 | ASTM D150 |
| Arc Resistance | 179 sec | 179 sec | ASTM D495 |
| Comparative Tracking Index | 175 V | 175 V | ASTM D3638 |
| Thermal Properties | Metric | English | Comments |
| Maximum Service Temperature, Air | 190 °C | 374 °F | Heat Resistance; ASTM D570D |
| Deflection Temperature at 1.8 MPa (264 psi) | 178 °C | 352 °F | ASTM D648 |
| Flammability, UL94 | V-0 @Thickness 4.30 mm | V-0 @Thickness 0.169 in | |
| Oxygen Index | 33 % | 33 % | ASTM D2863 |
| Shrinkage | 0.29 % | 0.29 % | 72 hr, 120oC; ASTM D1299 |