- 密度 [g/cm3]: 1.44
- 吸水率 [%]: 0.3
- 缺口沖擊強度: 0.25
- 斷裂伸長率 [%]: 92.2
- 彎曲強度 [MPa]: 60.3
- 彎曲模量 [MPa]: 9.10
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.44 g/cc | 0.0520 lb/in3 | ASTM D792 |
| Apparent Bulk Density | 0.520 g/cc | 0.0188 lb/in3 | ASTM D1895 |
| Water Absorption | 0.30 % | 0.30 % | ASTM D570 |
| Linear Mold Shrinkage | 0.0035 cm/cm | 0.0035 in/in | Post shrinkage is 0.17% at 72hr 120°C.; ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Rockwell E | 90 | 90 | ASTM D785 |
| Tensile Strength, Ultimate | 60.3 MPa | 8750 psi | ASTM D638 |
| Elongation at Break | 0.70 % | 0.70 % | ASTM D638 |
| Tensile Modulus | 10.0 GPa | 1450 ksi | ASTM D638 |
| Flexural Yield Strength | 92.2 MPa | 13400 psi | ASTM D790 |
| Flexural Modulus | 9.10 GPa | 1320 ksi | ASTM D790 |
| Compressive Yield Strength | 227.3 MPa | 32970 psi | ASTM D695 |
| Izod Impact, Notched | 0.250 J/cm | 0.468 ft-lb/in | ASTM D256 |
| Charpy Impact, Notched | 0.280 J/cm2 | 1.33 ft-lb/in2 | J/cm; ASTM D256 |
| Electrical Properties | Metric | English | Comments |
| Electrical Resistivity | 4.09e+12 ohm-cm | 4.09e+12 ohm-cm | ASTM D257 |
| Dielectric Constant | 4.5 @Frequency 1e+6 Hz | 4.5 @Frequency 1e+6 Hz | ASTM D150 |
| Dielectric Strength | 15.0 kV/mm | 381 kV/in | Short Term per ASTM D149. |
| Dissipation Factor | 0.036 @Frequency 1e+6 Hz | 0.036 @Frequency 1e+6 Hz | ASTM D150 |
| Arc Resistance | 140 sec | 140 sec | ASTM D495 |
| Comparative Tracking Index | 175 V | 175 V | ASTM D3638 |
| Thermal Properties | Metric | English | Comments |
| Maximum Service Temperature, Air | 199 °C | 390 °F | Heat Resistance; ASTM D795 |
| Deflection Temperature at 1.8 MPa (264 psi) | 206 °C | 403 °F | ASTM D648 |