- 密度 [g/cm3]: 1.52
- 吸水率 [%]: 0.25
- 斷裂伸長率 [%]: 80.0
- 彎曲強度 [MPa]: 60.9
- 彎曲模量 [MPa]: 9.50
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.52 g/cc | 0.0549 lb/in3 | ASTM D792 |
| Apparent Bulk Density | 0.730 g/cc | 0.0264 lb/in3 | ASTM D1895 |
| Water Absorption | 0.25 % | 0.25 % | ASTM D570 |
| Linear Mold Shrinkage | 0.0037 cm/cm | 0.0037 in/in | Post shrinkage is 0.12% at 72hr 120°C.; ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Rockwell E | 86 | 86 | ASTM D785 |
| Tensile Strength, Ultimate | 60.9 MPa | 8830 psi | ASTM D638 |
| Elongation at Break | 0.70 % | 0.70 % | ASTM D638 |
| Tensile Modulus | 10.6 GPa | 1540 ksi | ASTM D638 |
| Flexural Yield Strength | 80.0 MPa | 11600 psi | ASTM D790 |
| Flexural Modulus | 9.50 GPa | 1380 ksi | ASTM D790 |
| Compressive Yield Strength | 207.9 MPa | 30150 psi | ASTM D695 |
| Charpy Impact, Notched | 0.200 J/cm2 | 0.952 ft-lb/in2 | J/cm; ASTM D256 |
| Electrical Properties | Metric | English | Comments |
| Electrical Resistivity | 3.40e+12 ohm-cm | 3.40e+12 ohm-cm | ASTM D257 |
| Dielectric Constant | 4.8 @Frequency 1e+6 Hz | 4.8 @Frequency 1e+6 Hz | ASTM D150 |
| Dielectric Strength | 15.1 kV/mm | 384 kV/in | Short Term per ASTM D149. |
| Dissipation Factor | 0.038 @Frequency 1e+6 Hz | 0.038 @Frequency 1e+6 Hz | ASTM D150 |
| Arc Resistance | 160 sec | 160 sec | ASTM D495 |
| Comparative Tracking Index | 175 V | 175 V | ASTM D3638 |
| Thermal Properties | Metric | English | Comments |
| Maximum Service Temperature, Air | 204 °C | 399 °F | Heat Resistance; ASTM D795 |
| Deflection Temperature at 1.8 MPa (264 psi) | 200 °C | 392 °F | ASTM D648 |
| Flammability, UL94 | V-1 @Thickness 1.47 mm | V-1 @Thickness 0.0579 in | |