- 密度 [g/cm3]: 1.44
- 吸水率 [%]: 0.31
- 缺口沖擊強度: 0.253
- 彎曲強度 [MPa]: 62.0
- 彎曲模量 [MPa]: 9.20
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Bulk Density | 0.520 g/cc | 0.0188 lb/in3 | ASTM D1895 |
| Density | 1.44 g/cc | 0.0520 lb/in3 | ASTM D792 |
| Water Absorption | 0.31 % | 0.31 % | ASTM D570 |
| Linear Mold Shrinkage | 0.0035 cm/cm | 0.0035 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Rockwell E | 89 | 89 | ASTM D785 |
| Tensile Strength, Ultimate | 62.0 MPa | 8990 psi | ASTM D638 |
| Elongation at Break | 0.72 % | 0.72 % | ASTM D638 |
| Tensile Modulus | 10.1 GPa | 1460 ksi | ASTM D638 |
| Flexural Strength | 94.0 MPa | 13600 psi | ASTM D790 |
| Flexural Modulus | 9.20 GPa | 1330 ksi | ASTM D790 |
| Compressive Strength | 223 MPa | 32300 psi | ASTM D695 |
| Izod Impact, Notched | 0.253 J/cm | 0.474 ft-lb/in | ASTM D256 |
| Charpy Impact, Notched | 0.286 J/cm2 | 1.36 ft-lb/in2 | ASTM D256 |
| Impact | 200 | 200 | J/m drop Ball Impact; PLENCO |
| Electrical Properties | Metric | English | Comments |
| Volume Resistivity | 2.90e+12 ohm-cm | 2.90e+12 ohm-cm | ASTM D247 |
| Dielectric Constant | 4.7 | 4.7 | ASTM D150 |
| Dielectric Strength | 14.5 kV/mm | 368 kV/in | Short Time; ASTM D149 |
| Dissipation Factor | 0.040 | 0.040 | ASTM D150 |
| Arc Resistance | 146 sec | 146 sec | ASTM D495 |
| Comparative Tracking Index | 175 V | 175 V | ASTM D3638 |
| Thermal Properties | Metric | English | Comments |
| Maximum Service Temperature, Air | 198 °C | 388 °F | Heat Resistance; ASTM D570D |
| Deflection Temperature at 1.8 MPa (264 psi) | 204 °C | 399 °F | ASTM D648 |
| Oxygen Index | 35 % | 35 % | ASTM D2863 |
| Shrinkage | 0.18 % | 0.18 % | 72 hr, 120oC; ASTM D1299 |