- 密度 [g/cm3]: 1.78
- 吸水率 [%]: 0.08
- 缺口沖擊強度: 0.41
- 彎曲強度 [MPa]: 51.0
- 彎曲模量 [MPa]: 13.5
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Bulk Density | 0.770 g/cc | 0.0278 lb/in3 | ASTM D1895 |
| Density | 1.78 g/cc | 0.0643 lb/in3 | ASTM D792 |
| Water Absorption | 0.080 % | 0.080 % | ASTM D570 |
| Linear Mold Shrinkage | 0.0017 cm/cm | 0.0017 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Rockwell E | 86 | 86 | ASTM D785 |
| Tensile Strength, Ultimate | 51.0 MPa | 7400 psi | ASTM D638 |
| Elongation at Break | 0.33 % | 0.33 % | ASTM D638 |
| Tensile Modulus | 16.8 GPa | 2440 ksi | ASTM D638 |
| Flexural Strength | 65.0 MPa | 9430 psi | ASTM D790 |
| Flexural Modulus | 13.5 GPa | 1960 ksi | ASTM D790 |
| Compressive Strength | 172 MPa | 24900 psi | ASTM D695 |
| Izod Impact, Notched | 0.410 J/cm | 0.768 ft-lb/in | ASTM D256 |
| Charpy Impact, Notched | 0.510 J/cm2 | 2.43 ft-lb/in2 | ASTM D256 |
| Impact | 272 | 272 | J/m drop Ball Impact; PLENCO |
| Electrical Properties | Metric | English | Comments |
| Volume Resistivity | 8.00e+11 ohm-cm | 8.00e+11 ohm-cm | ASTM D247 |
| Dielectric Constant | 5.6 | 5.6 | ASTM D150 |
| Dielectric Strength | 15.2 kV/mm | 386 kV/in | Short Time; ASTM D149 |
| Dissipation Factor | 0.038 | 0.038 | ASTM D150 |
| Arc Resistance | 184 sec | 184 sec | ASTM D495 |
| Comparative Tracking Index | 250 V | 250 V | ASTM D3638 |
| Thermal Properties | Metric | English | Comments |
| Maximum Service Temperature, Air | 250 °C | 482 °F | Heat Resistance; ASTM D570D |
| Deflection Temperature at 1.8 MPa (264 psi) | 266 °C | 511 °F | ASTM D648 |
| Flammability, UL94 | V-0 @Thickness 0.500 mm | V-0 @Thickness 0.0197 in | |
| Shrinkage | 0.00060 % | 0.00060 % | 72 hr, 120oC; ASTM D1299 |