- 密度 [g/cm3]: 1.76
- 吸水率 [%]: 0.066
- 缺口沖擊強(qiáng)度: 0.44
- 彎曲強(qiáng)度 [MPa]: 108.0
- 彎曲模量 [MPa]: 16.2
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Bulk Density | 0.750 g/cc | 0.0271 lb/in3 | ASTM D1895 |
| Density | 1.76 g/cc | 0.0636 lb/in3 | ASTM D792 |
| Water Absorption | 0.066 % | 0.066 % | ASTM D570 |
| Linear Mold Shrinkage | 0.00086 cm/cm | 0.00086 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Rockwell E | 99 | 99 | ASTM D785 |
| Tensile Strength, Ultimate | 108 MPa | 15700 psi | ASTM D638 |
| Elongation at Break | 0.84 % | 0.84 % | ASTM D638 |
| Tensile Modulus | 15.8 GPa | 2290 ksi | ASTM D638 |
| Flexural Strength | 182 MPa | 26400 psi | ASTM D790 |
| Flexural Modulus | 16.2 GPa | 2350 ksi | ASTM D790 |
| Compressive Strength | 282 MPa | 40900 psi | ASTM D695 |
| Izod Impact, Notched | 0.440 J/cm | 0.824 ft-lb/in | ASTM D256 |
| Charpy Impact, Notched | 0.440 J/cm2 | 2.09 ft-lb/in2 | ASTM D256 |
| Impact | 260 | 260 | J/m drop Ball Impact; PLENCO |
| Electrical Properties | Metric | English | Comments |
| Volume Resistivity | 5.20e+11 ohm-cm | 5.20e+11 ohm-cm | ASTM D247 |
| Dielectric Constant | 5.6 | 5.6 | ASTM D150 |
| Dielectric Strength | 8.60 kV/mm | 218 kV/in | Step by Step; ASTM D149 |
| 11.7 kV/mm | 297 kV/in | Short Time; ASTM D149 | |
| Dissipation Factor | 0.031 | 0.031 | ASTM D150 |
| Arc Resistance | 102 sec | 102 sec | ASTM D495 |
| Comparative Tracking Index | 175 V | 175 V | ASTM D3638 |
| Thermal Properties | Metric | English | Comments |
| Maximum Service Temperature, Air | 228 °C | 442 °F | Heat Resistance; ASTM D570D |
| Deflection Temperature at 1.8 MPa (264 psi) | 280 °C | 536 °F | ASTM D648 |
| Flammability, UL94 | V-0 @Thickness 1.50 mm | V-0 @Thickness 0.0591 in | |
| Shrinkage | 0.040 % | 0.040 % | 72 hr, 120oC; ASTM D1299 |
- 關(guān)鍵詞:
- 供應(yīng)
- Transfer Molded
- 酚醛樹脂
- Plenco 6401 Phenolic
- Briquette