- 密度 [g/cm3]: 1.4
- 吸水率 [%]: 0.4
- 缺口沖擊強度: 0.169
- 彎曲強度 [MPa]: 53.0
- 彎曲模量 [MPa]: 8.50
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Bulk Density | 0.620 g/cc | 0.0224 lb/in3 | ASTM D1895 |
| Density | 1.40 g/cc | 0.0506 lb/in3 | ASTM D792 |
| Water Absorption | 0.40 % | 0.40 % | ASTM D570 |
| Linear Mold Shrinkage | 0.0048 cm/cm | 0.0048 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Rockwell E | 87 | 87 | ASTM D785 |
| Tensile Strength, Ultimate | 53.0 MPa | 7690 psi | ASTM D638 |
| Elongation at Break | 0.69 % | 0.69 % | ASTM D638 |
| Tensile Modulus | 8.30 GPa | 1200 ksi | ASTM D638 |
| Flexural Strength | 90.0 MPa | 13100 psi | ASTM D790 |
| Flexural Modulus | 8.50 GPa | 1230 ksi | ASTM D790 |
| Compressive Strength | 212 MPa | 30700 psi | ASTM D695 |
| Izod Impact, Notched | 0.169 J/cm | 0.317 ft-lb/in | ASTM D256 |
| Charpy Impact, Notched | 0.191 J/cm2 | 0.909 ft-lb/in2 | ASTM D256 |
| Impact | 109 | 109 | J/m drop Ball Impact; PLENCO |
| Electrical Properties | Metric | English | Comments |
| Volume Resistivity | 8.00e+11 ohm-cm | 8.00e+11 ohm-cm | ASTM D247 |
| Dielectric Constant | 5.2 | 5.2 | ASTM D150 |
| Dielectric Strength | 14.3 kV/mm | 363 kV/in | Short Time; ASTM D149 |
| Dissipation Factor | 0.047 | 0.047 | ASTM D150 |
| Arc Resistance | 134 sec | 134 sec | ASTM D495 |
| Comparative Tracking Index | 175 V | 175 V | ASTM D3638 |
| Thermal Properties | Metric | English | Comments |
| Thermal Conductivity | 0.370 W/m-K @Temperature 100 °C | 2.57 BTU-in/hr-ft2-°F @Temperature 212 °F | ASTM E1461 |
| Maximum Service Temperature, Air | 205 °C | 401 °F | Heat Resistance; ASTM D570D |
| Deflection Temperature at 1.8 MPa (264 psi) | 175 °C | 347 °F | ASTM D648 |
| Flammability, UL94 | HB @Thickness 1.50 mm | HB @Thickness 0.0591 in | |
| Oxygen Index | 25.5 % | 25.5 % | ASTM D2863 |
| Shrinkage | 0.173 % | 0.173 % | 72 hr, 120oC; ASTM D1299 |