- 密度 [g/cm3]: 1.19
- 透光率 [%]: 80.0
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Density | 1.19 g/cc | 0.0430 lb/in3 | ASTM D297 | ||
| Mechanical Properties | Metric | English | Comments | ||
| Hardness, Shore A | 33 | 33 | ASTM D2240 | ||
| Tensile Strength | 4.50 MPa | 653 psi | ASTM D412 | ||
| Elongation at Break | 570 % | 570 % | ASTM D412 | ||
| Compressive Modulus | 0.00160 GPa @Strain 5 % | 0.232 ksi @Strain 5 % | ISO-7743 | ||
| 0.00170 GPa @Strain 10 % | 0.247 ksi @Strain 10 % | ISO-7743 | |||
| 0.00180 GPa @Strain 20 % | 0.261 ksi @Strain 20 % | ISO-7743 | |||
| 0.00190 GPa @Strain 25 % | 0.276 ksi @Strain 25 % | ISO-7743 | |||
| Compression Set | 20 % | 20 % | ASTM D395 | ||
| Tensile Set | 5.1 % | 5.1 % | ASTM D412 | ||
| Optical Properties | Metric | English | Comments | ||
| Transmission, Visible | 80 % | 80 % | clear grade; thickness not known | ||
| Descriptive Properties | |||||
| Color | Clear | ||||
| Effect of Liquids - Change in Elongation (%) | -7.2 | ASTM D471 | |||
| Effect of Liquids - Change in Hardness (%) | -7.5 | ASTM D471 | |||
| Effect of Liquids - Change in Tensile Strength (%) | -6.8 | ASTM D471 | |||
| Effect of Liquids - Change in Volume after Oil Immersion (%) | 6.9 | ASTM D471 | |||
| Heat Aging - Change in Elongation (%) | -29 | ASTM D573 | |||
| Heat Aging - Change in Hardness (%) | 7 | ASTM D573; 200°C; 72h | |||
| Heat Aging - Change in Tensile Strength (%) | -17 | ASTM D573 | |||