- 密度 [g/cm3]: 1.19
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Density | 1.19 g/cc | 0.0430 lb/in3 | ASTM D297 | ||
| Mechanical Properties | Metric | English | Comments | ||
| Hardness, Shore A | 40 | 40 | ASTM D2240 | ||
| Tensile Strength | 7.20 MPa | 1040 psi | ASTM D412 | ||
| Elongation at Break | 545 % | 545 % | ASTM D412 | ||
| Compressive Modulus | 0.00180 GPa @Strain 5 % | 0.261 ksi @Strain 5 % | ISO-7743 | ||
| 0.00190 GPa @Strain 10 % | 0.276 ksi @Strain 10 % | ISO-7743 | |||
| 0.00220 GPa @Strain 20 % | 0.319 ksi @Strain 20 % | ISO-7743 | |||
| 0.00260 GPa @Strain 25 % | 0.377 ksi @Strain 25 % | ISO-7743 | |||
| Compression Set | 20 % | 20 % | ASTM D395 | ||
| Tensile Set | 6.0 % | 6.0 % | ASTM D412 | ||
| Descriptive Properties | |||||
| Color | Blue | ||||
| Effect of Liquids - Change in Elongation (%) | -12.1 | ASTM D471 | |||
| Effect of Liquids - Change in Hardness (%) | -5 | ASTM D471 | |||
| Effect of Liquids - Change in Tensile Strength (%) | -6.3 | ASTM D471 | |||
| Effect of Liquids - Change in Volume after Oil Immersion (%) | 7.7 | ASTM D471 | |||
| Heat Aging - Change in Elongation (%) | -36 | ASTM D573 | |||
| Heat Aging - Change in Hardness (%) | 6 | ASTM D573; 200°C; 72h | |||
| Heat Aging - Change in Tensile Strength (%) | -21.42 | ASTM D573 | |||