- 密度 [g/cm3]: 1.82
- 吸水率 [%]: 0.2
- 缺口沖擊強(qiáng)度: 2.27
- 彎曲強(qiáng)度 [MPa]: 40.0
- 彎曲模量 [MPa]: 10.9
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.82 g/cc | 0.0658 lb/in3 | ASTM D792 |
| Water Absorption | 0.20 % | 0.20 % | 24 hrs.; ASTM D570 |
| Linear Mold Shrinkage | 0.0010 cm/cm | 0.0010 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Barcol | 68 | 68 | |
| Tensile Strength, Ultimate | 40.0 MPa | 5800 psi | ASTM D638 |
| Elongation at Break | 0.50 % | 0.50 % | ASTM D638 |
| Modulus of Elasticity | 12.1 GPa | 1750 ksi | ASTM D638 |
| Flexural Strength | 88.3 MPa | 12800 psi | ASTM D790 |
| Flexural Modulus | 10.9 GPa | 1580 ksi | ASTM D790 |
| Compressive Strength | 140 MPa | 20300 psi | ASTM D695 |
| Izod Impact, Notched | 2.27 J/cm | 4.25 ft-lb/in | |
| Electrical Properties | Metric | English | Comments |
| Volume Resistivity | 2.70e+15 ohm-cm | 2.70e+15 ohm-cm | ASTM D257 |
| Dielectric Constant | 4.2 @Frequency 60 Hz | 4.2 @Frequency 60 Hz | ASTM D150 |
| Dielectric Strength | 14.8 kV/mm | 375 kV/in | ASTM D149 |
| Arc Resistance | 190 sec | 190 sec | ASTM D495 |
| Thermal Properties | Metric | English | Comments |
| CTE, linear | 11.9 μm/m-°C @Temperature 20.0 °C | 6.60 μin/in-°F @Temperature 68.0 °F | ASTM D696 |
| Specific Heat Capacity | 1.26 J/g-°C | 0.300 BTU/lb-°F | |
| Thermal Conductivity | 0.697 W/m-K | 4.84 BTU-in/hr-ft2-°F | ASTM C177 |
| Deflection Temperature at 1.8 MPa (264 psi) | 260 °C | 500 °F | ASTM D648 |
| Flammability, UL94 | V-0 | V-0 | 5V |