- 吸水率 [%]: 0.07
- 缺口沖擊強度: 18.69
- 彎曲模量 [MPa]: 16.5
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Specific Gravity | 1.82 g/cc | 1.82 g/cc | ASTM D792 | ||
| Water Absorption | 0.070 % | 0.070 % | ASTM D570 | ||
| Linear Mold Shrinkage | 0.0010 cm/cm | 0.0010 in/in | ASTM D955 | ||
| Spiral Flow | 50.8 cm @Pressure 27.6 MPa, Temperature 163 °C | 20.0 in @Pressure 4000 psi, Temperature 325 °F | Mesa | ||
| Mechanical Properties | Metric | English | Comments | ||
| Tensile Strength | 262 MPa | 38000 psi | ASTM D638 | ||
| Flexural Strength | 440 MPa | 63800 psi | ASTM D790 | ||
| Flexural Modulus | 16.5 GPa | 2390 ksi | ASTM D790 | ||
| Izod Impact, Notched | 18.69 J/cm | 35.01 ft-lb/in | ASTM D256 | ||
| Electrical Properties | Metric | English | Comments | ||
| Volume Resistivity | 3.00e+14 ohm-cm | 3.00e+14 ohm-cm | ASTM D257 | ||
| Dielectric Constant | 4.3 @Frequency 100 Hz | 4.3 @Frequency 100 Hz | ASTM D150 | ||
| Dielectric Strength | 19.7 kV/mm | 500 kV/in | ASTM D149 | ||
| Dissipation Factor | 0.0080 @Frequency 100 Hz | 0.0080 @Frequency 100 Hz | ASTM D150 | ||
| Thermal Properties | Metric | English | Comments | ||
| Maximum Service Temperature, Air | 300 °C | 572 °F | Deflection Temperature, Load not specified; ASTM D648 | ||
| Processing Properties | Metric | English | Comments | ||
| Processing Temperature | 132 - 166 °C | 270 - 330 °F | Mold Temperature | ||
| Cure Time | 5.00 - 10.0 min | 0.0833 - 0.167 hour | |||
| Shelf Life | 6.00 Month @Temperature -17.8 °C | 6.00 Month @Temperature 0.000 °F | |||
| Descriptive Properties | |||||
| Fiber Length (in) | 0.5 | Glass, nominal | |||