• <samp id="w83am"><delect id="w83am"></delect></samp>
        2. 

        <strong id="w83am"></strong>
        <bdo id="w83am"></bdo>
        

        
日本亚洲欧洲无免费码在线,亚洲婷婷六月的婷婷,亚洲精品国产综合久久一线,国产精品香港三级国产av,国模粉嫩小泬视频在线观看,h动态图男女啪啪27报gif,猫咪社区免费资源在线观看,亚洲国产精品成人av网 


    

    
    
        
        
          
            
        1. 首頁
          2. 
            
        2. 英文物性
          3. 
            
        3. LCP
          4. 
            
        4. Celanese Zenite? 7244 BK010 LCP
          5. 
        
        
        
        
            
        


                
        

                
        Celanese Zenite? 7244 BK010 LCP
        
                
        Celanese Zenite? 7244 BK010 LCP 物性表: Celanese Zenite? 7244 BK010 LCP物性表及特性介紹,Celanese Zenite? 7244 BK010 LCP注塑參數詳情,如需Celanese Zenite? 7244 BK010 LCP下載, 可到相關下載區下載
        

                
        
                    
        
                        
        

                            
          
                                
                                
        • 密度 [g/cm3]: 1.73
          • 
                                
                                
        • 彎曲模量 [MPa]: 11.3
          • 
                                
                            
        

                            
         
        Physical PropertiesMetricEnglishComments
        Density 1.73 g/cc0.0625 lb/in3ISO 1183
        

        Filler Content 40 %40 %
        

        Linear Mold Shrinkage, Flow 0.0010 cm/cm
        @Thickness 2.00 mm        		0.0010 in/in
        @Thickness 0.0787 in        		Parallel; ISO 294-4
        

        Linear Mold Shrinkage, Transverse 0.0050 cm/cm
        @Thickness 2.00 mm        		0.0050 in/in
        @Thickness 0.0787 in        		ISO 294-4
        

         
        Mechanical PropertiesMetricEnglishComments
        Tensile Strength at Break 115 MPa16700 psiISO 527
        

        Elongation at Break 1.4 %1.4 %ISO 527
        

        Tensile Modulus 14.0 GPa2030 ksiISO 527
        

        Flexural Strength 180 MPa
        @Temperature 23.0 °C        		26100 psi
        @Temperature 73.4 °F        		ISO 178
        

        Flexural Modulus 11.3 GPa
        @Temperature 23.0 °C        		1640 ksi
        @Temperature 73.4 °F        		ISO 178
        

        Charpy Impact, Notched 0.900 J/cm2
        @Temperature 23.0 °C        		4.28 ft-lb/in2
        @Temperature 73.4 °F        		ISO 179/1eA
        

         
        Electrical PropertiesMetricEnglishComments
        Dielectric Constant  3.9
        @Thickness 2.00 mm,
         Frequency 1.00e+10 Hz        		3.9
        @Thickness 0.0787 in,
         Frequency 1.00e+10 Hz        		Transverse; ASTM D2520 B
        

         4.1
        @Thickness 2.00 mm,
         Frequency 1.00e+9 Hz        		4.1
        @Thickness 0.0787 in,
         Frequency 1.00e+9 Hz        		ASTM D2520 B
        

         4.2
        @Thickness 2.00 mm,
         Frequency 1.00e+10 Hz        		4.2
        @Thickness 0.0787 in,
         Frequency 1.00e+10 Hz        		ASTM D2520 B
        

         4.2
        @Thickness 2.00 mm,
         Frequency 2.00e+10 Hz        		4.2
        @Thickness 0.0787 in,
         Frequency 2.00e+10 Hz        		ASTM D2520 B
        

        Dissipation Factor  0.0040
        @Thickness 2.00 mm,
         Frequency 1.00e+9 Hz        		0.0040
        @Thickness 0.0787 in,
         Frequency 1.00e+9 Hz        		ASTM D2520 B
        

         0.0040
        @Thickness 2.00 mm,
         Frequency 1.00e+10 Hz        		0.0040
        @Thickness 0.0787 in,
         Frequency 1.00e+10 Hz        		Transverse; ASTM D2520 B
        

         0.0040
        @Thickness 2.00 mm,
         Frequency 1.00e+10 Hz        		0.0040
        @Thickness 0.0787 in,
         Frequency 1.00e+10 Hz        		ASTM D2520 B
        

         0.0040
        @Thickness 2.00 mm,
         Frequency 2.00e+10 Hz        		0.0040
        @Thickness 0.0787 in,
         Frequency 2.00e+10 Hz        		ASTM D2520 B
        

        Comparative Tracking Index 200 V200 VIEC 60112
        

         
        Thermal PropertiesMetricEnglishComments
        CTE, linear  3.00 μm/m-°C
        @Thickness 2.00 mm,
         Temperature 160 - 260 °C        		1.67 μin/in-°F
        @Thickness 0.0787 in,
         Temperature 320 - 500 °F        		ISO 11359-1/-2
        

         4.00 μm/m-°C
        @Thickness 4.00 mm,
         Temperature 160 - 260 °C        		2.22 μin/in-°F
        @Thickness 0.157 in,
         Temperature 320 - 500 °F        		ISO 11359-1/-2
        

         5.00 μm/m-°C
        @Thickness 4.00 mm,
         Temperature -40.0 - 23.0 °C        		2.78 μin/in-°F
        @Thickness 0.157 in,
         Temperature -40.0 - 73.4 °F        		ISO 11359-1/-2
        

         5.00 μm/m-°C
        @Thickness 2.00 mm,
         Temperature -40.0 - 23.0 °C        		2.78 μin/in-°F
        @Thickness 0.0787 in,
         Temperature -40.0 - 73.4 °F        		ISO 11359-1/-2
        

         5.00 μm/m-°C
        @Thickness 2.00 mm,
         Temperature -40.0 - 260 °C        		2.78 μin/in-°F
        @Thickness 0.0787 in,
         Temperature -40.0 - 500 °F        		ISO 11359-1/-2
        

         6.00 μm/m-°C
        @Thickness 4.00 mm,
         Temperature -40.0 - 260 °C        		3.33 μin/in-°F
        @Thickness 0.157 in,
         Temperature -40.0 - 500 °F        		ISO 11359-1/-2
        

         6.00 μm/m-°C
        @Thickness 2.00 mm,
         Temperature 23.0 - 55.0 °C        		3.33 μin/in-°F
        @Thickness 0.0787 in,
         Temperature 73.4 - 131 °F        		ISO 11359-1/-2
        

         6.00 μm/m-°C
        @Thickness 4.00 mm,
         Temperature 23.0 - 55.0 °C        		3.33 μin/in-°F
        @Thickness 0.157 in,
         Temperature 73.4 - 131 °F        		ISO 11359-1/-2
        

         6.00 μm/m-°C
        @Thickness 2.00 mm,
         Temperature 55.0 - 160 °C        		3.33 μin/in-°F
        @Thickness 0.0787 in,
         Temperature 131 - 320 °F        		ISO 11359-1/-2
        

         7.00 μm/m-°C
        @Thickness 4.00 mm,
         Temperature 55.0 - 160 °C        		3.89 μin/in-°F
        @Thickness 0.157 in,
         Temperature 131 - 320 °F        		ISO 11359-1/-2
        

        CTE, linear, Transverse to Flow  32.0 μm/m-°C
        @Temperature -40.0 - 23.0 °C        		17.8 μin/in-°F
        @Temperature -40.0 - 73.4 °F        		ISO 11359-1/-2; 2mm
        

         38.0 μm/m-°C
        @Temperature -40.0 - 23.0 °C        		21.1 μin/in-°F
        @Temperature -40.0 - 73.4 °F        		ISO 11359-1/-2; 4mm
        

         42.0 μm/m-°C
        @Temperature -40.0 - 260 °C        		23.3 μin/in-°F
        @Temperature -40.0 - 500 °F        		ISO 11359-1/-2; 2mm
        

         50.0 μm/m-°C
        @Temperature -40.0 - 260 °C        		27.8 μin/in-°F
        @Temperature -40.0 - 500 °F        		ISO 11359-1/-2; 4mm
        

          35.0 μm/m-°C
        @Thickness 2.00 mm,
         Temperature 23.0 - 55.0 °C        		19.4 μin/in-°F
        @Thickness 0.0787 in,
         Temperature 73.4 - 131 °F        		ISO 11359-1/-2
        

         41.0 μm/m-°C
        @Thickness 4.00 mm,
         Temperature 23.0 - 55.0 °C        		22.8 μin/in-°F
        @Thickness 0.157 in,
         Temperature 73.4 - 131 °F        		ISO 11359-1/-2
        

         45.0 μm/m-°C
        @Thickness 2.00 mm,
         Temperature 55.0 - 160 °C        		25.0 μin/in-°F
        @Thickness 0.0787 in,
         Temperature 131 - 320 °F        		ISO 11359-1/-2
        

         48.0 μm/m-°C
        @Thickness 2.00 mm,
         Temperature 160 - 260 °C        		26.7 μin/in-°F
        @Thickness 0.0787 in,
         Temperature 320 - 500 °F        		ISO 11359-1/-2
        

         52.0 μm/m-°C
        @Thickness 4.00 mm,
         Temperature 55.0 - 160 °C        		28.9 μin/in-°F
        @Thickness 0.157 in,
         Temperature 131 - 320 °F        		ISO 11359-1/-2
        

         58.0 μm/m-°C
        @Thickness 4.00 mm,
         Temperature 160 - 260 °C        		32.2 μin/in-°F
        @Thickness 0.157 in,
         Temperature 320 - 500 °F        		ISO 11359-1/-2
        

        Deflection Temperature at 1.8 MPa (264 psi) 295 °C563 °FISO 75-1/-2 1993/N2
        

        UL RTI, Electrical 130 °C
        @Thickness 0.750 mm        		266 °F
        @Thickness 0.0295 in        		UL 746B
        

        UL RTI, Mechanical with Impact 130 °C
        @Thickness 0.750 mm        		266 °F
        @Thickness 0.0295 in        		UL 746B
        

        UL RTI, Mechanical without Impact 130 °C
        @Thickness 0.750 mm        		266 °F
        @Thickness 0.0295 in        		UL 746B
        

        Flammability, UL94  V-0
        @Thickness 0.350 mm        		V-0
        @Thickness 0.0138 in        		IEC 60695-11-10
        

         V-0
        @Thickness 0.350 mm        		V-0
        @Thickness 0.0138 in        		UL94
        

         
        Processing PropertiesMetricEnglishComments
        Melt Temperature 365 °C689 °FOptimum
        

         360 - 370 °C680 - 698 °F
        

        Mold Temperature 80.0 °C176 °FOptimum
        

         40.0 - 150 °C104 - 302 °F
        

        Drying Temperature 150 °C302 °F
        

        Dry Time 3 hour3 hourDehumidified Dryer
        

        Moisture Content <= 0.010 %<= 0.010 %
        

         
        Descriptive Properties
        ColorBlack
        Drying RecommendedYes
        FillerGlass/Mineral
        FormsPellets
        GenericLCP
        Part Marking Code>LCP-(GF+MD)40<ISO 11469
        Polymer FamilyLCP
        Polymer TypeLCP
        Processing MethodInjection Molding
        Product CategoryElectrical Resins
         Flame Retardant Resins
         Glass/Mineral Reinforced Resins
         Low Warp Resins
        Region AvailableAmericas
         Asia/Pacific
         Europe
        Resin IdentificationLCP-(GF+MD)40ISO 1043
        
  
  

  

  
        
                        
        
                        
                    
        
                
        





                

                
        
                    
        轉載請注明: 轉自中國塑膠原料之家 http://www.spnmy.cn/wuxingbiao/
        
                    
        本文鏈接: http://www.spnmy.cn/yuanliaoku/show-31774.html  
        
                    
        免責聲明: 本文 Celanese Zenite? 7244 BK010 LCP 僅代表作者個人觀點，中國塑膠原料之家無關。中國塑膠原料之家網所轉載的內容，其版權均由原作者和資料提供方所擁有！如因作品版權問題需要處理，請與我們聯絡  
        
                
        

                




            
        
        
        
    
        



    
        
        
        
            
        
                
        
                    
        
                        塑膠原料之家，專業塑料網站、原料報價網站，免費發布塑膠供求信息。塑膠原料之家為您提供塑料供應、塑料求購、塑料行情、塑料展會、塑料原料資訊服務。
                    
        
                    
        
                        2008-2015 塑料|塑膠原料|物性表大全|UL黃卡|SGS報告查詢|最新價格--塑膠原料之家
                    
        
                    
        
                      滬ICP備15027283號-4
                    
        
                
        

            
        
        
        
    
        

    
    
    




主站蜘蛛池模板：
爱性久久久久久久久
|
中文字幕日韩精品国产|
护士大爆乳双腿张开自慰喷水|
乱60一70归性欧老妇|
久久久久久久久久久免费精品|
人摸人人人澡人人超碰手机版|
午夜通通国产精品福利|
av一区二区三区亚洲|
国产一区国产二区在线视频|
欧美成人精品三级网站视频|
日韩av在线不卡一区二区三区|
精品国产国语对白主播野战|
亚州AV无码一区东京热久久|
中文字幕国产精品av|
国产成人免费av片在线观看|
亚洲国产精品毛片在线看|
国产精品免费精品自在线观看|
成在人线av无码免费高潮水老板|
国产亚洲情侣一区二区无|
国产日韩精品一区二区在线观看播放
|
日日爽日日操|
精品久久人人做爽综合|
亚洲AV无码乱码1区久久|
野外做受三级视频|
国产亚洲欧美另类一区二区三区|
国产精品高清视亚洲中文|
亚洲国产欧美在线人成app|
丝袜美腿亚洲综合第一页|
69精品丰满人妻无码视频a片|
精品偷拍被偷拍在线观看|
曰韩亚洲AV人人夜夜澡人人爽|
日韩精品中文字幕有码|
亚洲欧洲精品日韩av|
91亚洲精品福利在线播放|
国产老妇伦国产熟女老妇高清|
真人免费一级毛片一区二区|
国产精品会所一区二区三区|
免费人成再在线观看视频|
国产激情文学亚洲区综合|
午夜免费福利小电影|
色伦专区97中文字幕|