• <samp id="w83am"><delect id="w83am"></delect></samp>
        2. 

        <strong id="w83am"></strong>
        <bdo id="w83am"></bdo>
        

        
日本亚洲欧洲无免费码在线,亚洲婷婷六月的婷婷,亚洲精品国产综合久久一线,国产精品香港三级国产av,国模粉嫩小泬视频在线观看,h动态图男女啪啪27报gif,猫咪社区免费资源在线观看,亚洲国产精品成人av网 


    

    
    
        
        
          
            
        1. 首頁
          2. 
            
        2. 英文物性
          3. 
            
        3. LCP
          4. 
            
        4. Celanese Zenite? 7145L WT010 LCP
          5. 
        
        
        
        
            
        


                
        

                
        Celanese Zenite? 7145L WT010 LCP
        
                
        Celanese Zenite? 7145L WT010 LCP 物性表: Celanese Zenite? 7145L WT010 LCP物性表及特性介紹,Celanese Zenite? 7145L WT010 LCP注塑參數詳情,如需Celanese Zenite? 7145L WT010 LCP下載, 可到相關下載區下載
        

                
        
                    
        
                        
        

                            
          
                                
                                
        • 密度 [g/cm3]: 1.81
          • 
                                
                                
        • 吸水率 [%]: 0.1
          • 
                                
                                
        • 缺口沖擊強度: 0.6
          • 
                                
                                
        • 彎曲強度 [MPa]: 40.0
          • 
                                
                                
        • 彎曲模量 [MPa]: 17.8
          • 
                                
                            
        

                            
         
        Physical PropertiesMetricEnglishComments
        Specific Gravity 1.81 g/cc1.81 g/ccASTM D 792
        

        Density 1.81 g/cc0.0654 lb/in3ISO 1183
        

        Filler Content 45 %45 %
        

        Water Absorption 0.10 %
        @Thickness 3.20 mm        		0.10 %
        @Thickness 0.126 in        		Water, tap 23°C,24h; ASTM D570
        

        Linear Mold Shrinkage, Flow  0.00010 cm/cm
        @Thickness 3.17 mm        		0.00010 in/in
        @Thickness 0.125 in        		ASTM D955
        

         0.00050 cm/cm
        @Thickness 2.00 mm        		0.00050 in/in
        @Thickness 0.0787 in        		Parallel; ISO 294-4
        

         0.00070 cm/cm
        @Thickness 15.7 mm        		0.00070 in/in
        @Thickness 0.620 in        		ASTM D955
        

        Linear Mold Shrinkage, Transverse  0.0030 cm/cm
        @Thickness 3.17 mm        		0.0030 in/in
        @Thickness 0.125 in        		ASTM D955
        

         0.0050 cm/cm
        @Thickness 1.60 mm        		0.0050 in/in
        @Thickness 0.0630 in        		ASTM D955
        

         0.0050 cm/cm
        @Thickness 2.00 mm        		0.0050 in/in
        @Thickness 0.0787 in        		ISO 294-4
        

         
        Mechanical PropertiesMetricEnglishComments
        Tensile Strength at Break 120 MPa17400 psiISO 527
        

        Tensile Strength, Ultimate  40.0 MPa
        @Thickness 3.17 mm,
         Temperature 150 °C        		5800 psi
        @Thickness 0.125 in,
         Temperature 302 °F        		ASTM D638
        

         45.0 MPa
        @Thickness 1.60 mm,
         Temperature 150 °C        		6530 psi
        @Thickness 0.0630 in,
         Temperature 302 °F        		ASTM D638
        

         50.0 MPa
        @Thickness 3.17 mm,
         Temperature 120 °C        		7250 psi
        @Thickness 0.125 in,
         Temperature 248 °F        		ASTM D638
        

         57.0 MPa
        @Thickness 1.60 mm,
         Temperature 120 °C        		8270 psi
        @Thickness 0.0630 in,
         Temperature 248 °F        		ASTM D638
        

         119 MPa
        @Thickness 3.17 mm,
         Temperature 23.0 °C        		17300 psi
        @Thickness 0.125 in,
         Temperature 73.4 °F        		ASTM D638
        

         130 MPa
        @Thickness 1.60 mm,
         Temperature 23.0 °C        		18900 psi
        @Thickness 0.0630 in,
         Temperature 73.4 °F        		ASTM D638
        

         171 MPa
        @Thickness 3.17 mm,
         Temperature -40.0 °C        		24800 psi
        @Thickness 0.125 in,
         Temperature -40.0 °F        		ASTM D638
        

         190 MPa
        @Thickness 1.60 mm,
         Temperature -40.0 °C        		27600 psi
        @Thickness 0.0630 in,
         Temperature -40.0 °F        		ASTM D638
        

        Elongation at Break 0.90 %0.90 %ISO 527
        

          0.90 %
        @Thickness 1.60 mm,
         Temperature 23.0 °C        		0.90 %
        @Thickness 0.0630 in,
         Temperature 73.4 °F        		ASTM D638
        

         1.1 %
        @Thickness 3.17 mm,
         Temperature 23.0 °C        		1.1 %
        @Thickness 0.125 in,
         Temperature 73.4 °F        		ASTM D638
        

        Tensile Modulus 18.0 GPa2610 ksiISO 527
        

          9.00 GPa
        @Thickness 3.17 mm,
         Temperature 150 °C        		1310 ksi
        @Thickness 0.125 in,
         Temperature 302 °F        		ASTM D638
        

         10.3 GPa
        @Thickness 1.60 mm,
         Temperature 149 °C        		1490 ksi
        @Thickness 0.0630 in,
         Temperature 300 °F        		ASTM D638
        

         15.2 GPa
        @Thickness 3.17 mm,
         Temperature 120 °C        		2200 ksi
        @Thickness 0.125 in,
         Temperature 248 °F        		ASTM D638
        

         18.6 GPa
        @Thickness 3.17 mm,
         Temperature 23.0 °C        		2700 ksi
        @Thickness 0.125 in,
         Temperature 73.4 °F        		ASTM D638
        

         18.6 GPa
        @Thickness 1.60 mm,
         Temperature 120 °C        		2700 ksi
        @Thickness 0.0630 in,
         Temperature 248 °F        		ASTM D638
        

         21.0 GPa
        @Thickness 1.60 mm,
         Temperature 23.0 °C        		3050 ksi
        @Thickness 0.0630 in,
         Temperature 73.4 °F        		ASTM D638
        

         22.8 GPa
        @Thickness 3.17 mm,
         Temperature -40.0 °C        		3310 ksi
        @Thickness 0.125 in,
         Temperature -40.0 °F        		ASTM D638
        

         26.0 GPa
        @Thickness 1.60 mm,
         Temperature -40.0 °C        		3770 ksi
        @Thickness 0.0630 in,
         Temperature -40.0 °F        		ASTM D638
        

        Flexural Strength  24.0 MPa
        @Thickness 3.17 mm,
         Temperature 250 °C        		3480 psi
        @Thickness 0.125 in,
         Temperature 482 °F        		ASTM D790
        

         29.0 MPa
        @Thickness 0.790 mm,
         Temperature 250 °C        		4210 psi
        @Thickness 0.0311 in,
         Temperature 482 °F        		ASTM D790
        

         43.0 MPa
        @Thickness 3.17 mm,
         Temperature 200 °C        		6240 psi
        @Thickness 0.125 in,
         Temperature 392 °F        		ASTM D790
        

         50.0 MPa
        @Thickness 0.790 mm,
         Temperature 200 °C        		7250 psi
        @Thickness 0.0311 in,
         Temperature 392 °F        		ASTM D790
        

         58.0 MPa
        @Thickness 3.17 mm,
         Temperature 150 °C        		8410 psi
        @Thickness 0.125 in,
         Temperature 302 °F        		ASTM D790
        

         71.0 MPa
        @Thickness 1.60 mm,
         Temperature 150 °C        		10300 psi
        @Thickness 0.0630 in,
         Temperature 302 °F        		ASTM D790
        

         71.0 MPa
        @Thickness 3.17 mm,
         Temperature 120 °C        		10300 psi
        @Thickness 0.125 in,
         Temperature 248 °F        		ASTM D790
        

         75.0 MPa
        @Thickness 0.790 mm,
         Temperature 150 °C        		10900 psi
        @Thickness 0.0311 in,
         Temperature 302 °F        		ASTM D790
        

         92.0 MPa
        @Thickness 0.790 mm,
         Temperature 120 °C        		13300 psi
        @Thickness 0.0311 in,
         Temperature 248 °F        		ASTM D790
        

         158 MPa
        @Thickness 3.17 mm,
         Temperature 23.0 °C        		22900 psi
        @Thickness 0.125 in,
         Temperature 73.4 °F        		ASTM D790
        

         195 MPa
        @Thickness 1.60 mm,
         Temperature 23.0 °C        		28300 psi
        @Thickness 0.0630 in,
         Temperature 73.4 °F        		ASTM D790
        

         205 MPa
        @Thickness 0.790 mm,
         Temperature 23.0 °C        		29700 psi
        @Thickness 0.0311 in,
         Temperature 73.4 °F        		ASTM D790
        

         225 MPa
        @Thickness 3.17 mm,
         Temperature -40.0 °C        		32600 psi
        @Thickness 0.125 in,
         Temperature -40.0 °F        		ASTM D790
        

         280 MPa
        @Thickness 1.60 mm,
         Temperature -40.0 °C        		40600 psi
        @Thickness 0.0630 in,
         Temperature -40.0 °F        		ASTM D790
        

         300 MPa
        @Thickness 0.790 mm,
         Temperature -40.0 °C        		43500 psi
        @Thickness 0.0311 in,
         Temperature -40.0 °F        		ASTM D790
        

        Flexural Modulus 17.8 GPa
        @Temperature 23.0 °C        		2580 ksi
        @Temperature 73.4 °F        		ISO 178
        

          6.60 GPa
        @Thickness 3.17 mm,
         Temperature 250 °C        		957 ksi
        @Thickness 0.125 in,
         Temperature 482 °F        		ASTM D790
        

         7.60 GPa
        @Thickness 1.60 mm,
         Temperature 250 °C        		1100 ksi
        @Thickness 0.0630 in,
         Temperature 482 °F        		ASTM D790
        

         8.30 GPa
        @Thickness 0.790 mm,
         Temperature 250 °C        		1200 ksi
        @Thickness 0.0311 in,
         Temperature 482 °F        		ASTM D790
        

         8.30 GPa
        @Thickness 3.17 mm,
         Temperature 150 °C        		1200 ksi
        @Thickness 0.125 in,
         Temperature 302 °F        		ASTM D790
        

         8.60 GPa
        @Thickness 3.17 mm,
         Temperature 200 °C        		1250 ksi
        @Thickness 0.125 in,
         Temperature 392 °F        		ASTM D790
        

         9.00 GPa
        @Thickness 1.60 mm,
         Temperature 200 °C        		1310 ksi
        @Thickness 0.0630 in,
         Temperature 392 °F        		ASTM D790
        

         9.70 GPa
        @Thickness 0.790 mm,
         Temperature 200 °C        		1410 ksi
        @Thickness 0.0311 in,
         Temperature 392 °F        		ASTM D790
        

         9.70 GPa
        @Thickness 3.17 mm,
         Temperature 120 °C        		1410 ksi
        @Thickness 0.125 in,
         Temperature 248 °F        		ASTM D790
        

         11.0 GPa
        @Thickness 1.60 mm,
         Temperature 150 °C        		1600 ksi
        @Thickness 0.0630 in,
         Temperature 302 °F        		ASTM D790
        

         13.8 GPa
        @Thickness 3.17 mm,
         Temperature 23.0 °C        		2000 ksi
        @Thickness 0.125 in,
         Temperature 73.4 °F        		ASTM D790
        

         14.5 GPa
        @Thickness 0.790 mm,
         Temperature 150 °C        		2100 ksi
        @Thickness 0.0311 in,
         Temperature 302 °F        		ASTM D790
        

         16.0 GPa
        @Thickness 3.17 mm,
         Temperature -40.0 °C        		2320 ksi
        @Thickness 0.125 in,
         Temperature -40.0 °F        		ASTM D790
        

         17.2 GPa
        @Thickness 1.60 mm,
         Temperature 23.0 °C        		2490 ksi
        @Thickness 0.0630 in,
         Temperature 73.4 °F        		ASTM D790
        

         18.6 GPa
        @Thickness 1.60 mm,
         Temperature -40.0 °C        		2700 ksi
        @Thickness 0.0630 in,
         Temperature -40.0 °F        		ASTM D790
        

         20.7 GPa
        @Thickness 0.790 mm,
         Temperature 23.0 °C        		3000 ksi
        @Thickness 0.0311 in,
         Temperature 73.4 °F        		ASTM D790
        

         24.1 GPa
        @Thickness 0.790 mm,
         Temperature -40.0 °C        		3500 ksi
        @Thickness 0.0311 in,
         Temperature -40.0 °F        		ASTM D790
        

        Izod Impact, Notched  0.600 J/cm
        @Thickness 3.17 mm,
         Temperature 23.0 °C        		1.12 ft-lb/in
        @Thickness 0.125 in,
         Temperature 73.4 °F        		ASTM D256
        

         0.900 J/cm
        @Thickness 1.60 mm,
         Temperature 23.0 °C        		1.69 ft-lb/in
        @Thickness 0.0630 in,
         Temperature 73.4 °F        		ASTM D256
        

         1.90 J/cm
        @Thickness 0.790 mm,
         Temperature 23.0 °C        		3.56 ft-lb/in
        @Thickness 0.0311 in,
         Temperature 73.4 °F        		ASTM D256
        

        Izod Impact, Unnotched  3.16 J/cm
        @Thickness 3.17 mm,
         Temperature 23.0 °C        		5.92 ft-lb/in
        @Thickness 0.125 in,
         Temperature 73.4 °F        		ASTM D4812
        

         4.00 J/cm
        @Thickness 0.790 mm,
         Temperature 23.0 °C        		7.49 ft-lb/in
        @Thickness 0.0311 in,
         Temperature 73.4 °F        		ASTM D4812
        

         6.53 J/cm
        @Thickness 1.60 mm,
         Temperature 23.0 °C        		12.2 ft-lb/in
        @Thickness 0.0630 in,
         Temperature 73.4 °F        		ASTM D4812
        

        Izod Impact, Notched (ISO) 8.00 kJ/m2
        @Temperature 23.0 °C        		3.81 ft-lb/in2
        @Temperature 73.4 °F        		ISO 180/1A
        

        Charpy Impact Unnotched  1.20 J/cm2
        @Temperature -30.0 °C        		5.71 ft-lb/in2
        @Temperature -22.0 °F        		ISO 179/1eU
        

         1.40 J/cm2
        @Temperature 23.0 °C        		6.66 ft-lb/in2
        @Temperature 73.4 °F        		ISO 179/1eU
        

        Charpy Impact, Notched  0.800 J/cm2
        @Temperature -30.0 °C        		3.81 ft-lb/in2
        @Temperature -22.0 °F        		ISO 179/1eA
        

         0.800 J/cm2
        @Temperature 23.0 °C        		3.81 ft-lb/in2
        @Temperature 73.4 °F        		ISO 179/1eA
        

         
        Electrical PropertiesMetricEnglishComments
        Dielectric Constant  4.3
        @Frequency 60.0 Hz,
         Temperature 23.0 °C        		4.3
        @Frequency 60.0 Hz,
         Temperature 73.4 °F        		3.2mm (0.125in); ASTM D 150
        

         4.3
        @Frequency 1.00e+6 Hz,
         Temperature 23.0 °C        		4.3
        @Frequency 1.00e+6 Hz,
         Temperature 73.4 °F        		3.2mm (0.125in); ASTM D 150
        

         4.6
        @Frequency 1000 Hz,
         Temperature 23.0 °C        		4.6
        @Frequency 1000 Hz,
         Temperature 73.4 °F        		3.2mm (0.125in); ASTM D 150
        

         5.2
        @Frequency 1.00e+6 Hz,
         Temperature 120 °C        		5.2
        @Frequency 1.00e+6 Hz,
         Temperature 248 °F        		3.2mm (0.125in); ASTM D 150
        

         5.3
        @Frequency 1.00e+6 Hz,
         Temperature 150 °C        		5.3
        @Frequency 1.00e+6 Hz,
         Temperature 302 °F        		3.2mm (0.125in); ASTM D 150
        

         5.3
        @Frequency 1000 Hz,
         Temperature 120 °C        		5.3
        @Frequency 1000 Hz,
         Temperature 248 °F        		3.2mm (0.125in); ASTM D 150
        

         5.3
        @Frequency 1.00e+6 Hz,
         Temperature 200 °C        		5.3
        @Frequency 1.00e+6 Hz,
         Temperature 392 °F        		3.2mm (0.125in); ASTM D 150
        

         5.4
        @Frequency 1000 Hz,
         Temperature 150 °C        		5.4
        @Frequency 1000 Hz,
         Temperature 302 °F        		3.2mm (0.125in); ASTM D 150
        

         5.5
        @Frequency 1000 Hz,
         Temperature 200 °C        		5.5
        @Frequency 1000 Hz,
         Temperature 392 °F        		3.2mm (0.125in); ASTM D 150
        

         5.6
        @Frequency 60.0 Hz,
         Temperature 200 °C        		5.6
        @Frequency 60.0 Hz,
         Temperature 392 °F        		3.2mm (0.125in); ASTM D 150
        

        Dielectric Strength  20.0 kV/mm
        @Thickness 3.20 mm,
         Temperature 120 °C        		508 kV/in
        @Thickness 0.126 in,
         Temperature 248 °F        		Short time; ASTM D149
        

         20.0 kV/mm
        @Thickness 3.20 mm,
         Temperature 150 °C        		508 kV/in
        @Thickness 0.126 in,
         Temperature 302 °F        		Short time; ASTM D149
        

         20.0 kV/mm
        @Thickness 3.20 mm,
         Temperature 200 °C        		508 kV/in
        @Thickness 0.126 in,
         Temperature 392 °F        		Short time; ASTM D149
        

         21.0 kV/mm
        @Thickness 3.20 mm,
         Temperature 23.0 °C        		533 kV/in
        @Thickness 0.126 in,
         Temperature 73.4 °F        		Short time; ASTM D149
        

         25.0 kV/mm
        @Thickness 1.60 mm,
         Temperature 150 °C        		635 kV/in
        @Thickness 0.0630 in,
         Temperature 302 °F        		Short time; ASTM D149
        

         26.0 kV/mm
        @Thickness 1.60 mm,
         Temperature 200 °C        		660 kV/in
        @Thickness 0.0630 in,
         Temperature 392 °F        		Short time; ASTM D149
        

         27.0 kV/mm
        @Thickness 1.60 mm,
         Temperature 23.0 °C        		686 kV/in
        @Thickness 0.0630 in,
         Temperature 73.4 °F        		Short time; ASTM D149
        

         32.0 kV/mm
        @Thickness 0.800 mm,
         Temperature 200 °C        		813 kV/in
        @Thickness 0.0315 in,
         Temperature 392 °F        		Short time; ASTM D149
        

         33.0 kV/mm
        @Thickness 0.800 mm,
         Temperature 150 °C        		838 kV/in
        @Thickness 0.0315 in,
         Temperature 302 °F        		Short time; ASTM D149
        

         33.0 kV/mm
        @Thickness 0.800 mm,
         Temperature 120 °C        		838 kV/in
        @Thickness 0.0315 in,
         Temperature 248 °F        		Short time; ASTM D149
        

         34.0 kV/mm
        @Thickness 0.800 mm,
         Temperature 23.0 °C        		864 kV/in
        @Thickness 0.0315 in,
         Temperature 73.4 °F        		Short time; ASTM D149
        

        Dissipation Factor  0.0080
        @Frequency 1000 Hz,
         Temperature 120 °C        		0.0080
        @Frequency 1000 Hz,
         Temperature 248 °F        		3.2mm (0.125in); ASTM D 150
        

         0.0080
        @Frequency 1.00e+6 Hz,
         Temperature 200 °C        		0.0080
        @Frequency 1.00e+6 Hz,
         Temperature 392 °F        		3.2mm (0.125in); ASTM D 150
        

         0.0090
        @Frequency 1000 Hz,
         Temperature 150 °C        		0.0090
        @Frequency 1000 Hz,
         Temperature 302 °F        		3.2mm (0.125in); ASTM D 150
        

         0.012
        @Frequency 1.00e+6 Hz,
         Temperature 150 °C        		0.012
        @Frequency 1.00e+6 Hz,
         Temperature 302 °F        		3.2mm (0.125in); ASTM D 150
        

         0.013
        @Frequency 1000 Hz,
         Temperature 23.0 °C        		0.013
        @Frequency 1000 Hz,
         Temperature 73.4 °F        		3.2mm (0.125in); ASTM D 150
        

         0.014
        @Frequency 60.0 Hz,
         Temperature 23.0 °C        		0.014
        @Frequency 60.0 Hz,
         Temperature 73.4 °F        		3.2mm (0.125in); ASTM D 150
        

         0.015
        @Frequency 1000 Hz,
         Temperature 200 °C        		0.015
        @Frequency 1000 Hz,
         Temperature 392 °F        		3.2mm (0.125in); ASTM D 150
        

         0.023
        @Frequency 1.00e+6 Hz,
         Temperature 120 °C        		0.023
        @Frequency 1.00e+6 Hz,
         Temperature 248 °F        		3.2mm (0.125in); ASTM D 150
        

         0.025
        @Frequency 1.00e+6 Hz,
         Temperature 23.0 °C        		0.025
        @Frequency 1.00e+6 Hz,
         Temperature 73.4 °F        		3.2mm (0.125in); ASTM D 150
        

         0.083
        @Frequency 60.0 Hz,
         Temperature 200 °C        		0.083
        @Frequency 60.0 Hz,
         Temperature 392 °F        		3.2mm (0.125in); ASTM D 150
        

        Comparative Tracking Index 175 - 249 V175 - 249 VUL 746A
        

         
        Thermal PropertiesMetricEnglishComments
        CTE, linear  0.000 μm/m-°C
        @Thickness 2.00 mm,
         Temperature 160 - 260 °C        		0.000 μin/in-°F
        @Thickness 0.0787 in,
         Temperature 320 - 500 °F        		ISO 11359-1/-2
        

         3.00 μm/m-°C
        @Thickness 4.00 mm,
         Temperature 160 - 260 °C        		1.67 μin/in-°F
        @Thickness 0.157 in,
         Temperature 320 - 500 °F        		ISO 11359-1/-2
        

         3.00 μm/m-°C
        @Thickness 2.00 mm,
         Temperature 55.0 - 160 °C        		1.67 μin/in-°F
        @Thickness 0.0787 in,
         Temperature 131 - 320 °F        		ISO 11359-1/-2
        

         3.00 μm/m-°C
        @Thickness 2.00 mm,
         Temperature -40.0 - 23.0 °C        		1.67 μin/in-°F
        @Thickness 0.0787 in,
         Temperature -40.0 - 73.4 °F        		ISO 11359-1/-2
        

         3.00 μm/m-°C
        @Thickness 2.00 mm,
         Temperature -40.0 - 260 °C        		1.67 μin/in-°F
        @Thickness 0.0787 in,
         Temperature -40.0 - 500 °F        		ISO 11359-1/-2
        

         4.00 μm/m-°C
        @Thickness 4.00 mm,
         Temperature -40.0 - 260 °C        		2.22 μin/in-°F
        @Thickness 0.157 in,
         Temperature -40.0 - 500 °F        		ISO 11359-1/-2
        

         4.00 μm/m-°C
        @Thickness 2.00 mm,
         Temperature 23.0 - 55.0 °C        		2.22 μin/in-°F
        @Thickness 0.0787 in,
         Temperature 73.4 - 131 °F        		ISO 11359-1/-2
        

         4.00 μm/m-°C
        @Thickness 4.00 mm,
         Temperature -40.0 - 23.0 °C        		2.22 μin/in-°F
        @Thickness 0.157 in,
         Temperature -40.0 - 73.4 °F        		ISO 11359-1/-2
        

         5.00 μm/m-°C
        @Thickness 4.00 mm,
         Temperature 23.0 - 55.0 °C        		2.78 μin/in-°F
        @Thickness 0.157 in,
         Temperature 73.4 - 131 °F        		ISO 11359-1/-2
        

         5.00 μm/m-°C
        @Thickness 4.00 mm,
         Temperature 55.0 - 160 °C        		2.78 μin/in-°F
        @Thickness 0.157 in,
         Temperature 131 - 320 °F        		ISO 11359-1/-2
        

        CTE, linear, Transverse to Flow  51.0 μm/m-°C
        @Temperature -40.0 - 23.0 °C        		28.3 μin/in-°F
        @Temperature -40.0 - 73.4 °F        		ISO 11359-1/-2; 4mm
        

         52.0 μm/m-°C
        @Temperature -40.0 - 23.0 °C        		28.9 μin/in-°F
        @Temperature -40.0 - 73.4 °F        		ISO 11359-1/-2; 2mm
        

         72.0 μm/m-°C
        @Temperature -40.0 - 260 °C        		40.0 μin/in-°F
        @Temperature -40.0 - 500 °F        		ISO 11359-1/-2; 2mm
        

         72.0 μm/m-°C
        @Temperature -40.0 - 260 °C        		40.0 μin/in-°F
        @Temperature -40.0 - 500 °F        		ISO 11359-1/-2; 4mm
        

          60.0 μm/m-°C
        @Thickness 2.00 mm,
         Temperature 23.0 - 55.0 °C        		33.3 μin/in-°F
        @Thickness 0.0787 in,
         Temperature 73.4 - 131 °F        		ISO 11359-1/-2
        

         60.0 μm/m-°C
        @Thickness 4.00 mm,
         Temperature 23.0 - 55.0 °C        		33.3 μin/in-°F
        @Thickness 0.157 in,
         Temperature 73.4 - 131 °F        		ISO 11359-1/-2
        

         76.0 μm/m-°C
        @Thickness 2.00 mm,
         Temperature 55.0 - 160 °C        		42.2 μin/in-°F
        @Thickness 0.0787 in,
         Temperature 131 - 320 °F        		ISO 11359-1/-2
        

         76.0 μm/m-°C
        @Thickness 4.00 mm,
         Temperature 55.0 - 160 °C        		42.2 μin/in-°F
        @Thickness 0.157 in,
         Temperature 131 - 320 °F        		ISO 11359-1/-2
        

         78.0 μm/m-°C
        @Thickness 2.00 mm,
         Temperature 160 - 260 °C        		43.3 μin/in-°F
        @Thickness 0.0787 in,
         Temperature 320 - 500 °F        		ISO 11359-1/-2
        

         85.0 μm/m-°C
        @Thickness 4.00 mm,
         Temperature 160 - 260 °C        		47.2 μin/in-°F
        @Thickness 0.157 in,
         Temperature 320 - 500 °F        		ISO 11359-1/-2
        

        Melting Point 352 °C666 °F10°C/min; ISO 11357-1/-3
        

         357 °C675 °FASTM D 3418
        

        Deflection Temperature at 1.8 MPa (264 psi) 295 °C563 °FISO 75-1/-2
        

         295 °C563 °FASTM D 648
        

        Glass Transition Temp, Tg 120 °C248 °FASTM D 3418
        

        UL RTI, Electrical  240 °C
        @Thickness 1.50 mm        		464 °F
        @Thickness 0.0591 in        		UL 746B
        

         240 °C
        @Thickness 3.00 mm        		464 °F
        @Thickness 0.118 in        		UL 746B
        

        UL RTI, Mechanical with Impact  210 °C
        @Thickness 1.50 mm        		410 °F
        @Thickness 0.0591 in        		UL 746B
        

         210 °C
        @Thickness 3.00 mm        		410 °F
        @Thickness 0.118 in        		UL 746B
        

        UL RTI, Mechanical without Impact  240 °C
        @Thickness 1.50 mm        		464 °F
        @Thickness 0.0591 in        		UL 746B
        

         240 °C
        @Thickness 3.00 mm        		464 °F
        @Thickness 0.118 in        		UL 746B
        

        Flammability, UL94  V-0
        @Thickness 1.50 mm        		V-0
        @Thickness 0.0591 in        		IEC 60695-11-10
        

         V-0
        @Thickness 1.50 mm        		V-0
        @Thickness 0.0591 in        		UL94
        

         V-0
        @Thickness 3.00 mm        		V-0
        @Thickness 0.118 in        		IEC 60695-11-10
        

         V-0
        @Thickness 3.00 mm        		V-0
        @Thickness 0.118 in        		UL94
        

        Oxygen Index 38.5 %
        @Thickness 3.17 mm        		38.5 %
        @Thickness 0.125 in        		ASTM D2863
        

         
        Processing PropertiesMetricEnglishComments
        Melt Temperature 365 °C689 °FOptimum
        

         360 - 370 °C680 - 698 °F
        

        Mold Temperature 80.0 °C176 °FOptimum
        

         40.0 - 150 °C104 - 302 °F
        

        Drying Temperature 150 °C302 °F
        

        Dry Time 3 hour3 hourDehumidified Dryer
        

        Moisture Content <= 0.010 %<= 0.010 %
        

         
        Descriptive Properties
        AdditiveLubricant
        ColorCream
        Drying RecommendedYes
        FeaturesAppearance, Pleasing Surface
         Appearance, Pleasing Surface
         Arc Resistant
         Arc Resistant
         Aromatic
         Aromatic
         Chemical Resistance, Good
         Chemical Resistance, Good
         Dimensional Stability, Good
         Dimensional Stability, Good
         Flow, Good
         Flow, Good
         Heat Aging Resistance, Good
         Heat Aging Resistance, Good
         Lubricated
         Lubricated
         Moisture Absorption, Low
         Moisture Absorption, Low
         Platable
         Platable
        FillerGlass fiber reinforcement
        Flame Retardant - Halogen/Red Phosphorus FreeYes
        FormsPellets
        GenericLCP
        Part Marking Code>LCP-GF45<ISO 11469
        Polymer FamilyLCP
        Polymer TypeLCP
        ProcessingInjection Moldable
        Processing MethodInjection Molding
        Product CategoryElectrical Resins
         Flame Retardant Resins
         Glass Reinforced Resins
        Region AvailableAmericas
         Asia/Pacific
         Europe
        Resin IdentificationLCP-GF45ISO 1043
        UsesAutomotive Applications
         Automotive Electronics
         Automotive, Under the Hood
         Communication Applications
         Computer Components
         Connectors
         Electrical/Electronic Applications
         Parts, Engineering
         Parts, Thin-walled
         Printer Parts
        
  
  

  

  
        
                        
        
                        
                    
        
                
        





                

                
        
                    
        轉載請注明: 轉自中國塑膠原料之家 http://www.spnmy.cn/wuxingbiao/
        
                    
        本文鏈接: http://www.spnmy.cn/yuanliaoku/show-31772.html  
        
                    
        免責聲明: 本文 Celanese Zenite? 7145L WT010 LCP 僅代表作者個人觀點，中國塑膠原料之家無關。中國塑膠原料之家網所轉載的內容，其版權均由原作者和資料提供方所擁有！如因作品版權問題需要處理，請與我們聯絡  
        
                
        

                




            
        
        
        
    
        



    
        
        
        
            
        
                
        
                    
        
                        塑膠原料之家，專業塑料網站、原料報價網站，免費發布塑膠供求信息。塑膠原料之家為您提供塑料供應、塑料求購、塑料行情、塑料展會、塑料原料資訊服務。
                    
        
                    
        
                        2008-2015 塑料|塑膠原料|物性表大全|UL黃卡|SGS報告查詢|最新價格--塑膠原料之家
                    
        
                    
        
                      滬ICP備15027283號-4
                    
        
                
        

            
        
        
        
    
        

    
    
    




主站蜘蛛池模板：
精品国产一区二区三区国产区|
免费看的一级黄色片永久|
真人性囗交视频|
欧美成人精品 一区二区三区|
欧美日产国产精品日产|
在线精品国产成人综合|
国产在线拍揄自揄视精品不卡
|
亚洲欧洲精品一区二区|
天天干天天射天天操|
国产高清精品一区二区三区|
国产一区二区不卡在线|
蜜臀av午夜精品福利|
久久夜色精品国产亚av|
国产肉体xxxx裸体137大胆|
中文字幕人妻不卡精品|
色综合欧美五月俺也去|
四虎成人精品永久网站|
亚洲中文av一区二区三区|
99久久精品国产一区色|
亚洲免费视频一区二区三区|
亚洲精品日韩中文字幕|
国产丰满乱子伦无码专区|
精品无码国产日韩制服丝袜|
亚洲欧美卡通另类丝袜美腿|
精品久久久久久亚洲综合网|
无码国内精品久久人妻蜜桃|
91香蕉视频在线|
我国产码在线观看av哈哈哈网站
|
亚洲精品中文字幕在线观|
久久精品国产免费观看频道|
久国产精品韩国三级视频|
久久久无码精品国产一区|
国产乱色国产精品免费视频|
免费人成视频在线
|
久久亚洲欧美日本精品|
久久夜色撩人国产综合av|
福利片91|
国产成人理论在线视频观看|
免费午夜无码视频在线观看|
亚洲av产在线精品亚洲第一站|
成人午夜在线观看日韩|