国产91特黄特色A级毛片,97se亚洲综合自在线,把腿张开ji巴cao死你h,国产一区二区三区不卡在线看,久久国产成人午夜av影院

XANTAR? 22 R|PC|Mitsubishi EP

XANTAR? 22 R|PC|Mitsubishi EP 物性表: XANTAR? 22 R|PC|Mitsubishi EP物性表及特性介紹,XANTAR? 22 R|PC|Mitsubishi EP注塑參數詳情,如需XANTAR? 22 R|PC|Mitsubishi EP下載, 可到相關下載區下載

Product TextsLow Viscosity, Molding Release2	kg	ISO 1133
成型收縮(Molding shrinkage) (parallel)	0.6	%	ISO 294-4, 2577

機械性能(機械性能(Mechanical properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
拉伸模量(Tensile Modulus)	2300	MPa	ISO 527-1/-2
屈服應力(Yield stress)	60	MPa	ISO 527-1/-2
屈服應變(Yield strain)	6	%	ISO 527-1/-2
斷裂拉伸應變(Nominal strain at break)	>50	%	ISO 527-1/-2
Puncture - maximum force (+23°C)	5800	N	ISO 6603-2
Puncture - maximum force (-30°C)	6800	N	ISO 6603-2
Puncture energy (+23°C)	70	J	ISO 6603-2
Puncture energy (-30°C)	75	J	ISO 6603-2

熱性能(熱性能(Thermal properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
溫度負荷變形(Temp. of deflection under load) (1.80 MPa)	130	°C	ISO 75-1/-2
維卡軟化溫度（50℃/ h的50N）Vicat softening temperature	148	°C	ISO 306
COEFF線性熱(Coeff. of linear therm. expansion) (parallel)	65	E-6/K	ISO 11359-1/-2
燃燒性(球壓痕硬度(Burning behav)). at 1.5 mm nom. thickn.	V-2	class	IEC 60695-11-10
厚度測試(Thickness tested)	1.5	mm	IEC 60695-11-10
UL 識別(recognition)	UL	-	-
燃燒性(球壓痕硬度(Burning behav)). at thickness h	V-2	class	IEC 60695-11-10
厚度測試(Thickness tested)	0.4	mm	IEC 60695-11-10
UL 識別(recognition)	UL	-	-
Oxygen index	26	%	ISO 4589-1/-2

電氣性能(Electrical properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
相對介電常數(Relative permittivity) (100Hz)	3	-	IEC 60250
相對介電常數(Relative permittivity) (1MHz)	2.9	-	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (100Hz)	6.6	E-4	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (1MHz)	92	E-4	IEC 60250
體積電阻率(Volume resistivity)	>1E13	Ohm*m	IEC 60093
表面電阻率(Surface resistivity)	>1E15	Ohm	IEC 60093
電氣強度(Electric strength)	29	kV/mm	IEC 60243-1
相比漏電起痕指數(Comparative tracking index)	225	-	IEC 60112

其他屬性(Other properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
吸水率(Water absorption)	0.35	%	Sim. to ISO 62
密度(Density)	1200	kg/m3	ISO 1183

材料特殊性能(Material specific properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
粘數(Viscosity number)	55	cm3/g	ISO 307, 1157, 1628

流變計算屬性(Rheological calculation properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
密度(Density) of melt	1010	kg/m3	-
熔體熱導率(Thermal conductivity of melt)	0.24	W/(m K)	-
規格的熱容融化(Spec. heat capacity of melt)	1710	J/(kg K)	-
Eff. thermal diffusivity	1.40E-7	m2/s	-
噴射溫度(Ejection temperature)	131	°C	-

Test specimen production	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
Injection Molding, melt temperature	300	°C	ISO 294
Injection Molding, mold temperature	90	°C	ISO 10724

Diagrams .
[/td][/tr][/table]

關鍵詞:
PC
Mitsubishi EP
XANTAR? 22 R

轉載請注明: 轉自中國塑膠原料之家 http://www.spnmy.cn/wuxingbiao/

本文鏈接: http://www.spnmy.cn/wuxingbiao/show-99148.html

免責聲明: 本文 XANTAR? 22 R|PC|Mitsubishi EP 僅代表作者個人觀點，中國塑膠原料之家無關。中國塑膠原料之家網所轉載的內容，其版權均由原作者和資料提供方所擁有！如因作品版權問題需要處理，請與我們聯絡