亚洲VA久久久噜噜噜久久无码,亚洲18禁一区二区三区,视频一区二区三区中文字幕狠狠,国产精品成人一区二区三区,国产在线无码不卡播放

XANTAR廬 27 SR FD|PC|Mitsubishi EP

XANTAR廬 27 SR FD|PC|Mitsubishi EP 物性表: XANTAR廬 27 SR FD|PC|Mitsubishi EP物性表及特性介紹,XANTAR廬 27 SR FD|PC|Mitsubishi EP注塑參數詳情,如需XANTAR廬 27 SR FD|PC|Mitsubishi EP下載, 可到相關下載區下載

Product TextsVery High Viscosity, Steam Resistant, Food Grade2	kg	ISO 1133
鎴愬瀷鏀剁緝(Molding shrinkage) (parallel)	0.6	%	ISO 294-4, 2577

鏈烘鎬ц兘(鏈烘鎬ц兘(Mechanical properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO鏁版嵁(ISO鏁版嵁(CAMPUS/ISO) Data)
鎷変幾妯￠噺(Tensile Modulus)	2300	MPa	ISO 527-1/-2
灞堟湇搴斿姏(Yield stress)	60	MPa	ISO 527-1/-2
灞堟湇搴斿彉(Yield strain)	6	%	ISO 527-1/-2
鏂鎷変幾搴斿彉(Nominal strain at break)	>50	%	ISO 527-1/-2

鐑€ц兘(鐑€ц兘(Thermal properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO鏁版嵁(ISO鏁版嵁(CAMPUS/ISO) Data)
娓╁害璐熻嵎鍙樺艦(Temp. of deflection under load) (1.80 MPa)	130	擄C	ISO 75-1/-2
Vicat softening temperature (50擄C/h 50N)	150	擄C	ISO 306
COEFF綰挎€х儹(Coeff. of linear therm. expansion) (parallel)	65	E-6/K	ISO 11359-1/-2
鐕冪儳鎬?鐞冨帇鐥曠‖搴?Burning behav)). at 1.5 mm nom. thickn.	V-2	class	IEC 60695-11-10
鍘氬害嫻嬭瘯(Thickness tested)	1.5	mm	IEC 60695-11-10
UL 璇嗗埆(recognition)	UL	-	-
鐕冪儳鎬?鐞冨帇鐥曠‖搴?Burning behav)). at thickness h	V-2	class	IEC 60695-11-10
鍘氬害嫻嬭瘯(Thickness tested)	3.0	mm	IEC 60695-11-10
UL 璇嗗埆(recognition)	UL	-	-
Oxygen index	26	%	ISO 4589-1/-2

鐢墊皵鎬ц兘(Electrical properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO鏁版嵁(ISO鏁版嵁(CAMPUS/ISO) Data)
鐩稿浠嬬數甯告暟(Relative permittivity) (100Hz)	3	-	IEC 60250
鐩稿浠嬬數甯告暟(Relative permittivity) (1MHz)	2.9	-	IEC 60250
鑰楁暎鍥犳暟(鑰楁暎鍥犳暟(Dissipation factor)) (100Hz)	6.6	E-4	IEC 60250
鑰楁暎鍥犳暟(鑰楁暎鍥犳暟(Dissipation factor)) (1MHz)	92	E-4	IEC 60250
浣撶Н鐢甸樆鐜?Volume resistivity)	>1E13	Ohm*m	IEC 60093
琛ㄩ潰鐢甸樆鐜?Surface resistivity)	>1E15	Ohm	IEC 60093
鐢墊皵寮哄害(Electric strength)	29	kV/mm	IEC 60243-1
鐩告瘮婕忕數璧風棔鎸囨暟(Comparative tracking index)	225	-	IEC 60112

鍏朵粬灞炴€?Other properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO鏁版嵁(ISO鏁版嵁(CAMPUS/ISO) Data)
鍚告按鐜?Water absorption)	0.35	%	Sim. to ISO 62
瀵嗗害(Density)	1200	kg/m魯	ISO 1183

鏉愭枡鐗規畩鎬ц兘(Material specific properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO鏁版嵁(ISO鏁版嵁(CAMPUS/ISO) Data)
綺樻暟(Viscosity number)	68	cm魯/g	ISO 307, 1157, 1628

嫻佸彉璁＄畻灞炴€?Rheological calculation properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO鏁版嵁(ISO鏁版嵁(CAMPUS/ISO) Data)
瀵嗗害(Density) of melt	1010	kg/m魯	-
鐔斾綋鐑鐜?Thermal conductivity of melt)	0.24	W/(m K)	-
瑙勬牸鐨勭儹瀹硅瀺鍖?Spec. heat capacity of melt)	1710	J/(kg K)	-
Eff. thermal diffusivity	1.40E-7	m虜/s	-
鍠峰皠娓╁害(Ejection temperature)	131	擄C	-

Test specimen production	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO鏁版嵁(ISO鏁版嵁(CAMPUS/ISO) Data)
Injection Molding, melt temperature	300	擄C	ISO 294
Injection Molding, mold temperature	90	擄C	ISO 10724

Diagrams .
[/td][/tr][/table]

轉載請注明: 轉自中國塑膠原料之家 http://www.spnmy.cn/wuxingbiao/

本文鏈接: http://www.spnmy.cn/wuxingbiao/show-99141.html

免責聲明: 本文 XANTAR廬 27 SR FD|PC|Mitsubishi EP 僅代表作者個人觀點，中國塑膠原料之家無關。中國塑膠原料之家網所轉載的內容，其版權均由原作者和資料提供方所擁有！如因作品版權問題需要處理，請與我們聯絡