一面膜上边一面膜下边视频,四虎影视库国产精品一区,亚洲中文字幕无码一区日日添,亚洲成人动漫在线,国产一精品一av一免费

XANTAR? FC 19 UR|PC FR|Mitsubishi EP

Product TextsVery Low Viscosity, Flame Retardant, Molding Release, UV Stabilized2	kg	ISO 1133
成型收縮(Molding shrinkage) (parallel)	0.6	%	ISO 294-4, 2577

機械性能(機械性能(Mechanical properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
拉伸模量(Tensile Modulus)	2300	MPa	ISO 527-1/-2
屈服應力(Yield stress)	60	MPa	ISO 527-1/-2
屈服應變(Yield strain)	6	%	ISO 527-1/-2
斷裂拉伸應變(Nominal strain at break)	>50	%	ISO 527-1/-2

熱性能(熱性能(Thermal properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
溫度負荷變形(Temp. of deflection under load) (1.80 MPa)	130	°C	ISO 75-1/-2
維卡軟化溫度（50℃/ h的50N）Vicat softening temperature	145	°C	ISO 306
COEFF線性熱(Coeff. of linear therm. expansion) (parallel)	65	E-6/K	ISO 11359-1/-2
燃燒性(球壓痕硬度(Burning behav)). at 1.5 mm nom. thickn.	V-0	class	IEC 60695-11-10
厚度測試(Thickness tested)	1.5	mm	IEC 60695-11-10
UL 識別(recognition)	UL	-	-
燃燒性(球壓痕硬度(Burning behav)). at thickness h	V-0	class	IEC 60695-11-10
厚度測試(Thickness tested)	3.0	mm	IEC 60695-11-10
UL 識別(recognition)	UL	-	-
Oxygen index	35	%	ISO 4589-1/-2

電氣性能(Electrical properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
相對介電常數(Relative permittivity) (100Hz)	3	-	IEC 60250
相對介電常數(Relative permittivity) (1MHz)	2.9	-	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (100Hz)	6.6	E-4	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (1MHz)	92	E-4	IEC 60250
體積電阻率(Volume resistivity)	>1E13	Ohm*m	IEC 60093
表面電阻率(Surface resistivity)	>1E15	Ohm	IEC 60093
電氣強度(Electric strength)	29	kV/mm	IEC 60243-1
相比漏電起痕指數(Comparative tracking index)	225	-	IEC 60112

其他屬性(Other properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
吸水率(Water absorption)	0.35	%	Sim. to ISO 62
密度(Density)	1200	kg/m3	ISO 1183

材料特殊性能(Material specific properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
粘數(Viscosity number)	50	cm3/g	ISO 307, 1157, 1628

流變計算屬性(Rheological calculation properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
密度(Density) of melt	1010	kg/m3	-
熔體熱導率(Thermal conductivity of melt)	0.24	W/(m K)	-
規格的熱容融化(Spec. heat capacity of melt)	1710	J/(kg K)	-
Eff. thermal diffusivity	1.40E-7	m2/s	-
噴射溫度(Ejection temperature)	131	°C	-

Test specimen production	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
Injection Molding, melt temperature	300	°C	ISO 294
Injection Molding, mold temperature	90	°C	ISO 10724

CharacteristicsProcessingInjection Molding, Blow MoldingDelivery formPelletsAdditivesRelease agentSpecial CharacteristicsFlame retardant, Light stabilized or stable to light, U.V. stabilized or stable to weather, Heat stabilized or stable to heatRegional AvailabilityEuropeOther text informationInjection moldingInjection Molding RecommendationsChemical Media Resistance

Acids

關鍵詞:
PC FR
Mitsubishi EP
XANTAR? FC 19 UR

轉載請注明: 轉自中國塑膠原料之家 http://www.spnmy.cn/wuxingbiao/

本文鏈接: http://www.spnmy.cn/wuxingbiao/show-99145.html

免責聲明: 本文 XANTAR? FC 19 UR|PC FR|Mitsubishi EP 僅代表作者個人觀點，中國塑膠原料之家無關。中國塑膠原料之家網所轉載的內容，其版權均由原作者和資料提供方所擁有！如因作品版權問題需要處理，請與我們聯絡