亚洲国产欧美在线人成AAAA,肥大bbwbbw高潮抽搐,国产亚洲精品成人无码精品网站,久久精品a亚洲国产v高清不卡,韩国一级毛片中文字幕

Product TextsVESTAMID? X7393 blk8	%	ISO 294-4, 2577
成型收縮(Molding shrinkage) (normal)	1.4	%	ISO 294-4, 2577

[tr][/tr][tr][/tr]

機械性能(機械性能(Mechanical properties))

值(Value)

單位(Unit)

測試標準(Test Standard)

ISO數據(ISO數據(CAMPUS/ISO) Data)

拉伸模量(Tensile Modulus)

580

MPa

ISO 527-1/-2

屈服應力(Yield stress)

MPa

ISO 527-1/-2

屈服應變(Yield strain)

ISO 527-1/-2

斷裂拉伸應變(Nominal strain at break)

>50

ISO 527-1/-2

簡支梁沖擊強度(Charpy impact strength) (+23°C)

kJ/m2

ISO 179/1eU

簡支梁沖擊強度(Charpy impact strength) (-30°C)

kJ/m2

ISO 179/1eU

簡支梁缺口沖擊強度(Charpy notched impact strength) (+23°C)

115[P]

kJ/m2

ISO 179/1eA

簡支梁缺口沖擊強度(Charpy notched impact strength) (-30°C)

kJ/m2

ISO 179/1eA

Partial Break

熱性能(熱性能(Thermal properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
熔化溫度(熔化溫度(Melting temperature)) (10°C/min)	173	°C	ISO 11357-1/-3
溫度負荷變形(Temp. of deflection under load) (1.80 MPa)	45	°C	ISO 75-1/-2
溫度負荷變形(Temp. of deflection under load) (0.45 MPa)	115	°C	ISO 75-1/-2
維卡軟化溫度（50℃/ h的50N）Vicat softening temperature	130	°C	ISO 306
COEFF線性熱(Coeff. of linear therm. expansion) (parallel)	140	E-6/K	ISO 11359-1/-2
COEFF線性熱(Coeff. of linear therm. expansion) (normal)	140	E-6/K	ISO 11359-1/-2
燃燒性(球壓痕硬度(Burning behav)). at 1.5 mm nom. thickn.	HB	class	IEC 60695-11-10
厚度測試(Thickness tested)	1.6	mm	IEC 60695-11-10
燃燒性(球壓痕硬度(Burning behav)). at thickness h	HB	class	IEC 60695-11-10
厚度測試(Thickness tested)	3.2	mm	IEC 60695-11-10

電氣性能(Electrical properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
相對介電常數(Relative permittivity) (100Hz)	7	-	IEC 60250
相對介電常數(Relative permittivity) (1MHz)	4.2	-	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (100Hz)	1900	E-4	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (1MHz)	1100	E-4	IEC 60250
體積電阻率(Volume resistivity)	1E10	Ohm*m	IEC 60093
電氣強度(Electric strength)	27	kV/mm	IEC 60243-1
相比漏電起痕指數(Comparative tracking index)	600	-	IEC 60112

其他屬性(Other properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
吸濕性(Humidity absorption)	0.6	%	Sim. to ISO 62
密度(Density)	1020	kg/m3	ISO 1183

Test specimen production	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
Injection Molding, melt temperature	240	°C	ISO 294
Injection Molding, mold temperature	80	°C	ISO 10724
Injection Molding, injection velocity	200	mm/s	ISO 294
Injection Molding, pressure at hold	70	MPa	ISO 294

DiagramsV. stabilized or stable to weather, Heat stabilized or stable to heatRegional AvailabilityNorth America, Europe, Asia Pacific, South and Central America, Near East/AfricaOther text informationInjection moldingPREPROCESSING INFORMATION1 % The drying time is dependentAt a drying temperature of 80°C we recommend, depending on the waterFresh air dryers are acceptable, better would be a dry air orPlease note our product literature, plasticized resins can lose plasticizer during 1 % The drying time is dependentAt a drying temperature of 80 °C we recommend, depending on the waterFresh air dryers are acceptable, better would be a dry air orPlease note our product literature, plasticized resins can lose plasticizer during1 % The drying time is dependentAt a drying temperature of 80 °C we recommend, depending on the waterFresh air dryers are acceptable, better would be a dry air orPlease note our product literature, plasticized resins can lose plasticizer during ISO 1817 Liquid C) (23°C)[/td][/tr][tr][td] ISO 1817 Liquid 4) (23°C)[/td][/tr][tr][td] ISO 1817 Liquid F) (23°C)[/td][/tr][tr][td] ISO 1817 Liquid F) (90°C)[/td][/tr][tr][td] 4 Brake fluid (120°C)[/td][/tr][tr][td] .
[/td][/tr][/table]

VESTAMID? X7393 blk (sw)|PA12-I|Evonik Industries