PA6 6030G HS BK 30%玻璃、

 PA6 6030G 塑膠原料為半透明或不透明乳白包或帶黃色顆粒狀結晶形聚合物，具有可塑性。密度（g/cm3） 1．10-1．14；拉伸強度(MPa) 60. 0-80．0；洛氏硬度118；熔點252℃；脆化溫度-30℃；熱分解溫度大于350℃；連續耐熱80-120℃；沖擊強度（kJ/m2） 60-100；靜彎曲強度(MPa) 1 00-120；馬丁耐熱(℃) 50-60；彎曲彈性模量 (MPa) 2000～3000；體積電阻率（Ωcm） 1.83×1015；平衡吸水率2．5%；介電常數 1．63。

Physical Properties	Metric	English	Comments
Density	1.36 g/cc	0.0491 lb/in³	ISO 1183
Water Absorption	1.1 %	1.1 %	24 hour; ISO Test
	6.7 %	6.7 %	ISO 62
Moisture Absorption at Equilibrium	1.9 %	1.9 %	23°C/50% R.H.; ISO 62
Viscosity Measurement	55	55	Formic Acid
Linear Mold Shrinkage	0.0030 cm/cm	0.0030 in/in	ASTM Data; MD
Mechanical Properties	Metric	English	Comments
Hardness, Rockwell R	121	121	ASTM Test
Tensile Strength at Break	155 MPa	22500 psi	0.2 in/min; ASTM Test
	65.0 MPa @Temperature 120 °C	9430 psi @Temperature 248 °F	ASTM Test
	65.0 MPa @Temperature 120 °C	9430 psi @Temperature 248 °F	ISO Data
	80.0 MPa @Temperature 80.0 °C	11600 psi @Temperature 176 °F	ISO Data
	80.0 MPa @Temperature 80.0 °C	11600 psi @Temperature 176 °F	ASTM Test
	220 MPa @Temperature -40.0 °C	31900 psi @Temperature -40.0 °F	ASTM Test
	220 MPa @Temperature -40.0 °C	31900 psi @Temperature -40.0 °F	ISO Data
Tensile Strength, Ultimate	155 MPa	22500 psi	5mm/min; ISO 527
Elongation at Break	3.0 %	3.0 %	5mm/min; ISO 527
	3.0 %	3.0 %	0.2 in/min; ASTM Test
Tensile Modulus	9.58 GPa	1390 ksi	1mm/min; ISO 527
	2.73 GPa @Temperature 120 °C	396 ksi @Temperature 248 °F	ISO Data
	3.815 GPa @Temperature 80.0 °C	553.3 ksi @Temperature 176 °F	ISO Data
	8.74 GPa @Temperature -40.0 °C	1270 ksi @Temperature -40.0 °F	ISO Data
Flexural Strength	230 MPa	33400 psi	ISO Data
Flexural Modulus	8.07 GPa	1170 ksi	ISO Data
	8.48 GPa	1230 ksi	ASTM Test
Izod Impact, Notched	0.850 J/cm @Thickness 3.17 mm	1.59 ft-lb/in @Thickness 0.125 in	ASTM Test
Izod Impact, Notched (ISO)	8.00 kJ/m²	3.81 ft-lb/in²	ISO Test
	6.50 kJ/m² @Temperature -40.0 °C	3.09 ft-lb/in² @Temperature -40.0 °F	ISO Test
Charpy Impact Unnotched	5.40 J/cm²	25.7 ft-lb/in²	ISO 179
Charpy Impact, Notched	0.860 J/cm²	4.09 ft-lb/in²	ISO 179
Electrical Properties	Metric	English	Comments
Volume Resistivity	>= 1.00e+13 ohm-cm	>= 1.00e+13 ohm-cm	IEC 60093
Thermal Properties	Metric	English	Comments
CTE, linear	38.0 µm/m-°C @Temperature -30.0 - 30.0 °C	21.1 µin/in-°F @Temperature -22.0 - 86.0 °F	ASTM Test
CTE, linear, Parallel to Flow	25.0 µm/m-°C	13.9 µin/in-°F	ISO 11359
CTE, linear, Transverse to Flow	67.0 µm/m-°C	37.2 µin/in-°F	ISO 11359
Melting Point	220 °C	428 °F	10 K/min
	220 °C	428 °F	ASTM Test
Deflection Temperature at 0.46 MPa (66 psi)	219 °C	426 °F	ISO 75
Deflection Temperature at 1.8 MPa (264 psi)	205 °C	401 °F	ISO 75
	205 °C	401 °F	ASTM Test
Flammability, UL94	HB @Thickness 0.810 mm	HB @Thickness 0.0319 in
	HB @Thickness 3.00 mm	HB @Thickness 0.118 in
Processing Properties	Metric	English	Comments
Melt Temperature	275 °C	527 °F	Injection molding
Mold Temperature	115 °C	239 °F	Injection molding
Descriptive Properties
Color	BK
Commercial Status	Active America
Form	Pellets
Impact Modified	No
Primary Processing Technique	Injection Molding
Processing	Injection Molding
Special characteristic	Heat stabilized or stable to heat
UL.UL-C	Yes