PA6 2367G HS BK 25%的玻璃/礦物、

 PA6 2367G HS BK 性狀為半透明或不透明乳白色結晶形聚合物，具有可塑性。密度1．15g／cm3。熔點252℃。脆化溫度-30℃。熱分解溫度大于350℃。 連續耐熱80-120℃,平衡吸水率2．5％。能耐酸、堿、大多數無機鹽水溶液、鹵代烷、烴類、酯類、酮類等腐蝕，但易溶于苯酚、甲酸等極性溶劑。具有優良的耐磨性、自潤滑性，機械強度較高。但吸水性較大，因而尺寸穩定性較差。

Physical Properties	Metric	English	Comments
Density	1.48 g/cc	0.0535 lb/in³	ISO 1183
Water Absorption	0.90 %	0.90 %	24 hour; ISO Test
	5.7 %	5.7 %	ISO 62
Moisture Absorption at Equilibrium	1.6 %	1.6 %	23°C/50% R.H.; ISO 62
Linear Mold Shrinkage	0.0040 cm/cm	0.0040 in/in	ASTM Data; MD
Mechanical Properties	Metric	English	Comments
Hardness, Rockwell R	121	121	ASTM Test
Tensile Strength at Break	120 MPa	17400 psi	0.2 in/min; ASTM Test
Tensile Strength, Ultimate	120 MPa	17400 psi	5mm/min; ISO 527
Elongation at Break	3.0 %	3.0 %	0.2 in/min; ASTM Test
	3.0 %	3.0 %	5mm/min; ISO 527
Flexural Strength	170 MPa	24700 psi	ISO Data
Flexural Modulus	6.63 GPa	962 ksi	ISO Data
	7.59 GPa	1100 ksi	ASTM Test
Izod Impact, Notched	0.500 J/cm @Thickness 3.17 mm	0.937 ft-lb/in @Thickness 0.125 in	ASTM Test
Izod Impact, Notched (ISO)	5.00 kJ/m²	2.38 ft-lb/in²	ISO Test
Charpy Impact Unnotched	4.80 J/cm²	22.8 ft-lb/in²	ISO 179
Charpy Impact, Notched	0.450 J/cm²	2.14 ft-lb/in²	ISO 179
Thermal Properties	Metric	English	Comments
CTE, linear	31.0 µm/m-°C @Temperature -30.0 - 30.0 °C	17.2 µin/in-°F @Temperature -22.0 - 86.0 °F	ASTM Test
Melting Point	220 °C	428 °F	10 K/min
	220 °C	428 °F	ASTM Test
Deflection Temperature at 0.46 MPa (66 psi)	217 °C	423 °F	ISO 75
Deflection Temperature at 1.8 MPa (264 psi)	198 °C	388 °F	ISO 75
	203 °C	397 °F	ASTM Test
Descriptive Properties
Color	BK
Commercial Status	Active America
Form	Pellets
Impact Modified	No
Primary Processing Technique	Injection Molding
Processing	Injection Molding