顆粒圖： 
物性表:
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Density | 1.24 g/cc | 0.0448 lb/in³ | ISO 1183/A | ||
| Water Absorption | 1.1 % @Temperature 23.0 °C, Time 86400 sec |
1.1 % @Temperature 73.4 °F, Time 24.0 hour |
ISO 62 | ||
| Linear Mold Shrinkage | 0.0073 cm/cm | 0.0073 in/in | Isotropy | ||
| Linear Mold Shrinkage, Flow | 0.0080 cm/cm | 0.0080 in/in | |||
| Linear Mold Shrinkage, Transverse | 0.011 cm/cm | 0.011 in/in | |||
| Mechanical Properties | Metric | English | Comments | ||
| Tensile Strength at Break | 125 MPa | 18100 psi | ISO 527 Type 1A | ||
| Tensile Strength, Yield | 125 MPa | 18100 psi | ISO 527 type 1 A | ||
| Elongation at Break | 4.0 % | 4.0 % | ISO 527 Type 1A | ||
| Tensile Modulus | 6.20 GPa | 899 ksi | ISO 527 Type 1A | ||
| Flexural Modulus | 5.30 GPa | 769 ksi | ISO 178 | ||
| Izod Impact, Notched (ISO) | 6.00 kJ/m² | 2.86 ft-lb/in² | ISO 180/1A | ||
| Charpy Impact Unnotched | 4.10 J/cm² | 19.5 ft-lb/in² | ISO 179/1eU | ||
| Charpy Impact, Notched | 0.700 J/cm² | 3.33 ft-lb/in² | ISO 179/1eA | ||
| Electrical Properties | Metric | English | Comments | ||
| Volume Resistivity | 1.00e+14 ohm-cm | 1.00e+14 ohm-cm | IEC 60093 | ||
| Surface Resistance | 6.00e+13 ohm | 6.00e+13 ohm | IEC 60093 | ||
| Dielectric Strength | 31.0 kV/mm | 787 kV/in | IEC 60243 | ||
| Dissipation Factor | 0.010 | 0.010 | IEC 60250 | ||
| Comparative Tracking Index | 450 V | 450 V | Solution A; IEC 60112 | ||
| Thermal Properties | Metric | English | Comments | ||
| CTE, linear, Parallel to Flow | 35.0 µm/m-°C @Temperature 23.0 - 85.0 °C |
19.4 µin/in-°F @Temperature 73.4 - 185 °F |
ISO 11359 | ||
| Melting Point | 263 °C | 505 °F | ISO 11357 | ||
| Deflection Temperature at 1.8 MPa (264 psi) | 245 °C | 473 °F | ISO 75/Af | ||
| Flammability, UL94 | HB @Thickness 1.60 mm |
HB @Thickness 0.0630 in |
1210 | ||
| Oxygen Index | 24 % | 24 % | ISO 4589 | ||
| Processing Properties | Metric | English | Comments | ||
| Feed Temperature | 260 - 270 °C | 500 - 518 °F | |||
| Mold Temperature | 60.0 - 80.0 °C | 140 - 176 °F | |||
| Drying Temperature | 80.0 °C | 176 °F | |||
| Moisture Content | <= 0.20 % | <= 0.20 % | |||
| De |
|||||
| Compression Zone | 270-280°C | ||||
用途：
廣泛應用于機械、儀器儀表、汽車部件、電子電氣、鐵路、家電、通訊、紡機、體育休閑用品、油管、油箱及一些精密工程制品。
電子電器：連接器、卷線軸、計時器、護蓋斷路器、開關殼座。
汽車： 散熱風扇、門把、油箱蓋、進氣隔柵、水箱護蓋、燈座。
工業零件：椅座、自行車輸框、溜冰鞋底座、紡織梭、踏板、滑輸。
上海松翰塑化科技有限公司，供應原料，品質真實,物實價廉。
PA6T,46,9T、PC、PC/ABS、PBT、ABS、PPA、PPS、POM、PMMA、TPE、PPO、LCP液晶聚合物。
歡迎各位客戶前來咨詢：
聯系人： 夏先生
手 機：13501802636
QQ ：205730283
郵 箱 ：205730283@qq.com