国产精品久久久久无码网站,极品无码人妻巨屁股系列,亚洲人成网站在线播放2019,真实国产老熟女无套中出,久久精品国产精品亚洲

Victrex? PEEK 450CA40 Polyetheretherketone, 40% Carbon Fibre Reinforced

Victrex? PEEK 450CA40 Polyetheretherketone, 40% Carbon Fibre Reinforced 物性表: Victrex? PEEK 450CA40 Polyetheretherketone, 40% Carbon Fibre Reinforced物性表及特性介紹,Victrex? PEEK 450CA40 Polyetheretherketone, 40% Carbon Fibre Reinforced注塑參數詳情,如需Victrex? PEEK 450CA40 Polyetheretherketone, 40% Carbon Fibre Reinforced下載, 可到相關下載區下載

密度 [g/cm3]: 1.44
吸水率 [%]: 0.03
缺口沖擊強度: 0.85
彎曲模量 [MPa]: 28.0

Physical Properties	Metric	English	Comments

Density	1.44 g/cc	0.0520 lb/in3	Crystalline; ISO 1183
Water Absorption	0.030 % @Temperature 23.0 °C, Time 86400 sec	0.030 % @Temperature 73.4 °F, Time 24.0 hour	3.2mm thick tensile bar; ISO 62-1
Water Absorption at Saturation	0.30 % @Temperature 23.0 °C	0.30 % @Temperature 73.4 °F	Equilibrium; by immersion; ISO 62-1
Viscosity	850000 cP @Temperature 400 °C	850000 cP @Temperature 752 °F	melt; ISO 11443
Linear Mold Shrinkage, Flow	0.0010 cm/cm	0.0010 in/in	360°C nozzle, 160°C tool; ISO 294-4
Linear Mold Shrinkage, Transverse	0.0050 cm/cm	0.0050 in/in	405°C nozzle, 200°C tool; ISO 294-4
Spiral Flow	65.0 cm @Thickness 1.00 mm	25.6 in @Thickness 0.0394 in	405°C nozzle, 200°C tool

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	250 MPa @Temperature 23.0 °C	36300 psi @Temperature 73.4 °F	ISO 527
Elongation at Break	1.5 % @Temperature 23.0 °C	1.5 % @Temperature 73.4 °F	ISO 527
Tensile Modulus	32.0 GPa @Temperature 23.0 °C	4640 ksi @Temperature 73.4 °F	ISO 527
Flexural Strength	380 MPa @Temperature 23.0 °C	55100 psi @Temperature 73.4 °F	ISO 178
Flexural Modulus	28.0 GPa @Temperature 23.0 °C	4060 ksi @Temperature 73.4 °F	ISO 178
Izod Impact, Notched (ISO)	0.850 kJ/m2 @Temperature 23.0 °C	0.404 ft-lb/in2 @Temperature 73.4 °F	ISO 180/A
Izod Impact, Unnotched (ISO)	4.00 kJ/m2 @Temperature 23.0 °C	1.90 ft-lb/in2 @Temperature 73.4 °F	ISO 180/U

Thermal Properties	Metric	English	Comments
CTE, linear	5.00 μm/m-°C @Temperature <=143 °C	2.78 μin/in-°F @Temperature <=289 °F	Along flow below Tg; ISO 11359
	8.00 μm/m-°C @Temperature >=143 °C	4.44 μin/in-°F @Temperature >=289 °F	Along flow above Tg; ISO 11359
	35.0 μm/m-°C @Temperature <=143 °C	19.4 μin/in-°F @Temperature <=289 °F	Average below Tg; ISO 11359
	90.0 μm/m-°C @Temperature >=143 °C	50.0 μin/in-°F @Temperature >=289 °F	Average above Tg; ISO 11359
Specific Heat Capacity	1.80 J/g-°C @Temperature 23.0 °C	0.430 BTU/lb-°F @Temperature 73.4 °F	DSC
Melting Point	343 °C	649 °F	ISO 11357
Glass Transition Temp, Tg	143 °C	289 °F	Onset; ISO 11357
Flammability, UL94	V-0 @Thickness 0.500 mm	V-0 @Thickness 0.0197 in
Glow Wire Test	960 °C @Thickness 2.00 mm	1760 °F @Thickness 0.0787 in	IEC 60695-2-12

Processing Properties	Metric	English	Comments
Mold Temperature	190 - 210 °C	374 - 410 °F
Drying Temperature	120 °C @Time 18000 sec	248 °F @Time 5.00 hour
	150 °C @Time 10800 sec	302 °F @Time 3.00 hour

Descriptive Properties
Toxicity Index	0.05		NES 713; CO content
	0.12		NES 713; CO₂ content
	0.17		NES 713; Total gases

關鍵詞:
PEEK
供應
Victrex? PEEK 450CA40 Polyetheretherketone
40% Carbon Fibre Reinforced

轉載請注明: 轉自中國塑膠原料之家 http://www.spnmy.cn/wuxingbiao/

本文鏈接: http://www.spnmy.cn/yuanliaoku/show-50379.html

免責聲明: 本文 Victrex? PEEK 450CA40 Polyetheretherketone, 40% Carbon Fibre Reinforced 僅代表作者個人觀點，中國塑膠原料之家無關。中國塑膠原料之家網所轉載的內容，其版權均由原作者和資料提供方所擁有！如因作品版權問題需要處理，請與我們聯絡