- 吸水率 [%]: 0.06
- 缺口沖擊強度: 0.55
- 彎曲強度 [MPa]: 131.0
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.41 g/cc | 1.41 g/cc | ASTM D792 |
| Water Absorption | 0.060 % | 0.060 % | 24 hours; ASTM D570 (2) |
| Water Absorption at Saturation | 0.30 % | 0.30 % | ASTM D570 (2) |
| Mechanical Properties | Metric | English | Comments |
| Tensile Strength, Ultimate | 131 MPa | 19000 psi | ASTM D638 |
| Elongation at Break | 5.0 % | 5.0 % | ASTM D638 |
| Modulus of Elasticity | 7.58 GPa | 1100 ksi | ASTM D638 |
| Compressive Strength | 200 MPa | 29000 psi | ASTM D695 |
| Izod Impact, Notched | 0.550 J/cm | 1.03 ft-lb/in | ASTM D256 type "A" |
| Coefficient of Friction | 0.20 | 0.20 | ASTM PTM 55007 |
| K (wear) Factor | 302 x 10-8 mm3/N-M | 150 x 10-10 in3-min/ft-lb-hr | QTM 55010 |
| Limiting Pressure Velocity | 0.876 MPa-m/sec | 25000 psi-ft/min | 4:1 safety factor |
| Electrical Properties | Metric | English | Comments |
| Dielectric Strength | 1.26 kV/mm | 32.0 kV/in | ASTM D149 |
| Thermal Properties | Metric | English | Comments |
| CTE, linear | 18.0 μm/m-°C @Temperature 100 °C | 10.0 μin/in-°F @Temperature 212 °F | ASTM E-831 (TMA) |
| Maximum Service Temperature, Air | 250 °C | 482 °F | |
| Flammability, UL94 | V-0 @Thickness 3.17 mm | V-0 @Thickness 0.125 in | ASTM UL-94 |