- 拉伸強度 [MPa]: 3.86
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 0.900 g/cc | 0.900 g/cc | ASTM D792 |
| Linear Mold Shrinkage | 0.0217 cm/cm | 0.0217 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Shore A | 50 | 50 | Instant; ASTM D2240 |
| Tensile Strength, Yield | 3.86 MPa | 560 psi | Method A (Dumbbell & Section), 20 in/min, Break; ASTM D412 |
| 3.76 MPa @Strain 300 % | 545 psi @Strain 300 % | Method A (Dumbbell & Section), 20 in/min; ASTM D412 | |
| Elongation at Break | 390 % | 390 % | Method A (Dumbbell & Section), 20 in/min; ASTM D412 |
| Tear Strength | 28.0 kN/m | 160 pli | Die C (graves), 20 in/min; ASTM D624 |
| Compression Set | 19 % | 19 % | Method B, 73°F(23°C), 22 hrs; ASTM D395 |