- 彎曲模量 [MPa]: 2.00
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Specific Gravity | 1.11 g/cc | 1.11 g/cc | ISO 1183 | ||
| Water Absorption | <= 0.35 % | <= 0.35 % | 23°C/24h | ||
| Linear Mold Shrinkage | 0.014 - 0.020 cm/cm | 0.014 - 0.020 in/in | |||
| Mechanical Properties | Metric | English | Comments | ||
| Tensile Stress | 45.0 MPa | 6530 psi | |||
| Elongation at Yield | 4.0 % | 4.0 % | |||
| 6.5 % | 6.5 % | flexural | |||
| Flexural Strength | 70.0 MPa | 10200 psi | |||
| Flexural Modulus | 2.00 GPa | 290 ksi | |||
| Charpy Impact Unnotched | 2.90 J/cm2 | 13.8 ft-lb/in2 | flatwise; ISO 179 1fU | ||
| Charpy Impact, Notched | 0.600 J/cm2 | 2.86 ft-lb/in2 | ISO 179 1eA | ||
| Coefficient of Friction, Dynamic | 0.27 | 0.27 | |||
| Coefficient of Friction, Static | 0.21 | 0.21 | |||
| Electrical Properties | Metric | English | Comments | ||
| Surface Resistance | >= 1.00e+12 ohm | >= 1.00e+12 ohm | |||
| Insulation Resistance | >= 1.00e+12 ohm | >= 1.00e+12 ohm | |||
| Processing Properties | Metric | English | Comments | ||
| Processing Temperature | 280 °C | 536 °F | mass temp | ||
| Nozzle Temperature | 230 - 285 °C | 446 - 545 °F | |||
| Zone 1 | 220 - 260 °C | 428 - 500 °F | |||
| Zone 2 | 225 - 265 °C | 437 - 509 °F | |||
| Zone 3 | 230 - 275 °C | 446 - 527 °F | |||
| Mold Temperature | 60.0 - 120 °C | 140 - 248 °F | |||
| Drying Temperature | 80.0 °C @Time 14400 - 21600 sec | 176 °F @Time 4.00 - 6.00 hour | Dehumidifying dryer | ||
| Descriptive Properties | |||||
| Color | black | ||||