- 密度 [g/cm3]: 1.22
- 吸水率 [%]: 1.1
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Density | 1.22 g/cc | 0.0441 lb/in3 | ISO 1183 | ||
| Water Absorption | 1.1 % | 1.1 % | ISO 62 | ||
| Moisture Absorption | 0.600 % | 0.600 % | ISO 62 | ||
| Linear Mold Shrinkage, Flow | 0.0010 cm/cm | 0.0010 in/in | ISO 294-4, 2577 | ||
| Linear Mold Shrinkage, Transverse | 0.0070 cm/cm | 0.0070 in/in | ISO 294-4, 2577 | ||
| Mechanical Properties | Metric | English | Comments | ||
| Hardness, Shore D | 77 | 77 | conditioned, 15s; ISO 868 | ||
| Ball Indentation Hardness | 120 MPa | 17400 psi | conditioned; ISO 2039-1 | ||
| Tensile Strength at Break | 105 MPa | 15200 psi | conditioned; ISO 527-1/-2 | ||
| 120 MPa | 17400 psi | dry; ISO 527-1/-2 | |||
| Elongation at Break | 6.0 % | 6.0 % | dry; ISO 527-1/-2 | ||
| 8.0 % | 8.0 % | conditioned; ISO 527-1/-2 | |||
| Tensile Modulus | 6.00 GPa | 870 ksi | conditioned; ISO 527-1/-2 | ||
| 6.50 GPa | 943 ksi | dry; ISO 527-1/-2 | |||
| Charpy Impact Unnotched | 8.00 J/cm2 | 38.1 ft-lb/in2 | conditioned; ISO 179/1eU | ||
| 9.00 J/cm2 | 42.8 ft-lb/in2 | dry; ISO 179/1eU | |||
| 8.00 J/cm2 @Temperature 30.0 °C | 38.1 ft-lb/in2 @Temperature 86.0 °F | conditioned; ISO 179/1eU | |||
| 9.00 J/cm2 @Temperature 30.0 °C | 42.8 ft-lb/in2 @Temperature 86.0 °F | dry; ISO 179/1eU | |||
| Charpy Impact, Notched | 1.90 J/cm2 | 9.04 ft-lb/in2 | dry; ISO 179/1eA | ||
| 2.00 J/cm2 | 9.52 ft-lb/in2 | conditioned; ISO 179/1eA | |||
| 1.50 J/cm2 @Temperature 30.0 °C | 7.14 ft-lb/in2 @Temperature 86.0 °F | dry; ISO 179/1eU | |||
| 1.50 J/cm2 @Temperature 30.0 °C | 7.14 ft-lb/in2 @Temperature 86.0 °F | conditioned; ISO 179/1eU | |||
| Electrical Properties | Metric | English | Comments | ||
| Volume Resistivity | 1.00e+13 ohm-cm | 1.00e+13 ohm-cm | conditioned; IEC 60093 | ||
| Surface Resistance | 1.00e+12 ohm | 1.00e+12 ohm | IEC 60093 | ||
| Dielectric Strength | 35.0 kV/mm | 889 kV/in | conditioned; IEC 60243-1 | ||
| Comparative Tracking Index | 600 V | 600 V | conditioned; IEC 60112 | ||
| Thermal Properties | Metric | English | Comments | ||
| CTE, linear, Parallel to Flow | 20.0 μm/m-°C | 11.1 μin/in-°F | ISO 11359-1/-2 | ||
| CTE, linear, Transverse to Flow | 150 μm/m-°C | 83.3 μin/in-°F | ISO 11359-1/-2 | ||
| Melting Point | 178 °C | 352 °F | 10°C/min; ISO 11357-1/-3 | ||
| Maximum Service Temperature, Air | 90.0 - 120 °C | 194 - 248 °F | long term; EMS | ||
| 150 °C | 302 °F | short term; EMS | |||
| Deflection Temperature at 1.8 MPa (264 psi) | 160 °C | 320 °F | ISO 75-1/-2 | ||
| Deflection Temperature at 8.0 MPa | 90.0 °C | 194 °F | ISO 75-1/-2 | ||
| Flammability, UL94 | HB | HB | IEC 60695-11-10 | ||
| Descriptive Properties | |||||
| Food contact | EU Requirements | ||||
| FDA | |||||
| NSF 51 | |||||
| Form | Granules | ||||
| Industry & Consumer goods | Heating systems | ||||
| Housewares | |||||
| Sanitary, water and gas supply | |||||
| Processing | Injection Molding | ||||
| Product Attributes | Hydrolysis resistant | ||||
| Special Characteristics | High impact or impact modified | ||||
| Improved heat resistance | |||||
| Improved UV resistance (outdoor use) | |||||
| Water Contact | ACS | ||||
| DVGW W270 | |||||
| KTW | |||||
| NSF 61 | |||||
| WRAS | |||||