- 密度 [g/cm3]: 1.15
- 吸水率 [%]: 1.1
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Density | 1.15 g/cc | 0.0415 lb/in3 | ISO 1183 | ||
| Water Absorption | 1.1 % | 1.1 % | ISO 62 | ||
| Moisture Absorption | 0.600 % | 0.600 % | ISO 62 | ||
| Linear Mold Shrinkage, Transverse | 0.0010 cm/cm | 0.0010 in/in | ISO 294-4, 2577 | ||
| Mechanical Properties | Metric | English | Comments | ||
| Ball Indentation Hardness | 135 MPa | 19600 psi | conditioned; ISO 2039-1 | ||
| Tensile Strength at Break | 250 MPa | 36300 psi | conditioned; ISO 527-1/-2 | ||
| Elongation at Break | 1.7 % | 1.7 % | conditioned; ISO 527-1/-2 | ||
| Tensile Modulus | 19.0 GPa | 2760 ksi | conditioned; ISO 527-1/-2 | ||
| Charpy Impact Unnotched | 7.00 J/cm2 | 33.3 ft-lb/in2 | conditioned; ISO 179/1eU | ||
| Charpy Impact, Notched | 2.80 J/cm2 | 13.3 ft-lb/in2 | conditioned; ISO 179/1eA | ||
| Electrical Properties | Metric | English | Comments | ||
| Volume Resistivity | 10000 ohm-cm | 10000 ohm-cm | conditioned; IEC 60093 | ||
| Surface Resistance | 50 ohm | 50 ohm | IEC 60093 | ||
| Thermal Properties | Metric | English | Comments | ||
| CTE, linear, Transverse to Flow | 50.0 μm/m-°C | 27.8 μin/in-°F | ISO 11359-1/-2 | ||
| Melting Point | 178 °C | 352 °F | 10°C/min; ISO 11357-1/-3 | ||
| Deflection Temperature at 1.8 MPa (264 psi) | 170 °C | 338 °F | ISO 75-1/-2 | ||
| Deflection Temperature at 8.0 MPa | 160 °C | 320 °F | ISO 75-1/-2 | ||
| Flammability, UL94 | HB | HB | IEC 60695-11-10 | ||
| Descriptive Properties | |||||
| Automotive | Automotive electr. and electronics, lighting | ||||
| Cooling and climate control | |||||
| Exterior | |||||
| Fuel systems | |||||
| Interior | |||||
| Powertrain and Chassis | |||||
| Electricals & Electronics | Connectors | ||||
| Electrical appliances | |||||
| Electrical equipment | |||||
| Energy distribution | |||||
| Form | Granules | ||||
| Industry & Consumer goods | Housewares | ||||
| Hydraulics & Pneumatics | |||||
| Mechanical Engineering | |||||
| Power transmission | |||||
| Sports & Leisure | |||||
| Tools & Accessories | |||||
| Processing | Injection Molding | ||||
| Product Attributes | Long Fiber Reinforced | ||||
| Special Characteristics | Anti-static | ||||
| Improved heat resistance | |||||