• <samp id="w83am"><delect id="w83am"></delect></samp>
        2. 

        <strong id="w83am"></strong>
        <bdo id="w83am"></bdo>
        

        
日本亚洲欧洲无免费码在线,亚洲婷婷六月的婷婷,亚洲精品国产综合久久一线,国产精品香港三级国产av,国模粉嫩小泬视频在线观看,h动态图男女啪啪27报gif,猫咪社区免费资源在线观看,亚洲国产精品成人av网 


    

    
    
        
        
          
            
        1. 首頁
          2. 
            
        2. 英文物性
          3. 
            
        3. PA6
          4. 
            
        4. Akro-Plastic Akromid? B3 GF 30 (2472) PA 6 Dry, 30% Glass Filled
          5. 
        
        
        
        
            
        


                
        

                
        Akro-Plastic Akromid? B3 GF 30 (2472) PA 6 Dry, 30% Glass Filled
        
                
        Akro-Plastic Akromid? B3 GF 30 (2472) PA 6 Dry, 30% Glass Filled 物性表: Akro-Plastic Akromid? B3 GF 30 (2472) PA 6 Dry, 30% Glass Filled物性表及特性介紹,Akro-Plastic Akromid? B3 GF 30 (2472) PA 6 Dry, 30% Glass Filled注塑參數詳情,如需Akro-Plastic Akromid? B3 GF 30 (2472) PA 6 Dry, 30% Glass Filled下載, 可到相關下載區下載
        

                
        
                    
        
                        
        

                            
          
                                
                                
        • 密度 [g/cm3]: 1.36
          • 
                                
                                
        • 吸水率 [%]: 1.2
          • 
                                
                                
        • 彎曲模量 [MPa]: 8.50
          • 
                                
                                
        • 熱變形溫度 [℃]: 220.0
          • 
                                
                            
        

                            
         
        Physical PropertiesMetricEnglishComments
        Density 1.36 g/cc
        @Temperature 23.0 °C        		0.0491 lb/in3
        @Temperature 73.4 °F        		ISO 1183
        

        Filler Content 30 %30 %ISO 1172
        

        Water Absorption 1.2 %1.2 %
        

          2.1 - 2.3 %
        @Temperature 23.0 °C        		2.1 - 2.3 %
        @Temperature 73.4 °F        		50% r.h.; ISO 62
        

        Water Absorption at Saturation  0.50 %
        @Temperature 30.0 °C        		0.50 %
        @Temperature 86.0 °F
        

         1.45 %
        @Temperature 100 °C        		1.45 %
        @Temperature 212 °F
        

         1.7 %
        @Temperature 140 °C        		1.7 %
        @Temperature 284 °F
        

         1.95 %
        @Temperature 240 °C        		1.95 %
        @Temperature 464 °F
        

         2.05 %
        @Temperature 280 °C        		2.05 %
        @Temperature 536 °F
        

         2.1 %
        @Temperature 330 °C        		2.1 %
        @Temperature 626 °F
        

         2.15 %
        @Temperature 405 °C        		2.15 %
        @Temperature 761 °F
        

         6.3 - 6.9 %
        @Time 82800 sec        		6.3 - 6.9 %
        @Time 23.0 hour        		ISO 62
        

        Linear Mold Shrinkage, Flow 0.0014 cm/cm0.0014 in/inISO 294-4
        

        Linear Mold Shrinkage, Transverse 0.0083 cm/cm0.0083 in/inISO 294-4
        

        Spiral Flow 655 cm258 inCross Section: 7[mm]x3.5[mm]; AKRO
        

         
        Mechanical PropertiesMetricEnglishComments
        Tensile Strength at Break 185 MPa26800 psi5 [mm/min]; ISO 527-1/2
        

          92.5 MPa
        @Temperature 160 - 175 °C,
         Time 1.80e+7 sec        		13400 psi
        @Temperature 320 - 347 °F,
         Time 5000 hour        		5 [mm/min], 50% Loss of Tensile Strength; ISO 527-1/2
        

         92.5 MPa
        @Temperature 130 - 150 °C,
         Time 7.20e+7 sec        		13400 psi
        @Temperature 266 - 302 °F,
         Time 20000 hour        		5 [mm/min], 50% Loss of Tensile Strength; ISO 527-1/2
        

        Tensile Stress 110 MPa16000 psi
        

        Elongation at Break 3.0 %3.0 %5 [mm/min]; ISO 527-1/2
        

        Tensile Modulus 9.60 GPa1390 ksi1[mm/min]; ISO 527-1/2
        

          6.00 GPa
        @Treatment Temp. 70.0 °C,
         Time 1.22e+6 sec        		870 ksi
        @Treatment Temp. 158 °F,
         Time 340 hour        		62% rel. humidity
        

         6.00 GPa
        @Treatment Temp. 70.0 °C,
         Time 1.48e+6 sec        		870 ksi
        @Treatment Temp. 158 °F,
         Time 410 hour        		62% rel. humidity
        

         6.00 GPa
        @Treatment Temp. 70.0 °C,
         Time 1.69e+6 sec        		870 ksi
        @Treatment Temp. 158 °F,
         Time 470 hour        		62% rel. humidity
        

         6.10 GPa
        @Treatment Temp. 70.0 °C,
         Time 1.04e+6 sec        		885 ksi
        @Treatment Temp. 158 °F,
         Time 290 hour        		62% rel. humidity
        

         6.25 GPa
        @Treatment Temp. 70.0 °C,
         Time 864000 sec        		906 ksi
        @Treatment Temp. 158 °F,
         Time 240 hour        		62% rel. humidity
        

         7.00 GPa
        @Treatment Temp. 70.0 °C,
         Time 504000 sec        		1020 ksi
        @Treatment Temp. 158 °F,
         Time 140 hour        		62% rel. humidity
        

         8.00 GPa
        @Treatment Temp. 70.0 °C,
         Time 360000 sec        		1160 ksi
        @Treatment Temp. 158 °F,
         Time 100 hour        		62% rel. humidity
        

        Flexural Strength 270 MPa39200 psi2 [mm/min]; ISO 178
        

        Flexural Modulus 8.50 GPa1230 ksi2 [mm/min]; ISO 178
        

        Charpy Impact Unnotched  8.50 J/cm2
        @Temperature -30.0 °C        		40.4 ft-lb/in2
        @Temperature -22.0 °F        		ISO 179/1eU
        

         9.50 J/cm2
        @Temperature 23.0 °C        		45.2 ft-lb/in2
        @Temperature 73.4 °F        		ISO 179/1eU
        

        Charpy Impact, Notched 1.70 J/cm28.09 ft-lb/in2
        

          1.20 J/cm2
        @Temperature -30.0 °C        		5.71 ft-lb/in2
        @Temperature -22.0 °F        		ISO 179/1eA
        

         1.30 J/cm2
        @Temperature 23.0 °C        		6.19 ft-lb/in2
        @Temperature 73.4 °F        		ISO 179/1eA
        

         
        Electrical PropertiesMetricEnglishComments
        Volume Resistivity 1.00e+13 ohm-cm1.00e+13 ohm-cmIEC 60093
        

        Surface Resistance 1.00e+12 ohm1.00e+12 ohmIEC 60093
        

        Comparative Tracking Index 575 V575 VTest Solution A; IEC 60112
        

         
        Thermal PropertiesMetricEnglishComments
        CTE, linear, Parallel to Flow 16.0 μm/m-°C
        @Temperature 23.0 - 80.0 °C        		8.89 μin/in-°F
        @Temperature 73.4 - 176 °F        		ISO 11359-1/2
        

        CTE, linear, Transverse to Flow 95.0 μm/m-°C
        @Temperature 23.0 - 80.0 °C        		52.8 μin/in-°F
        @Temperature 73.4 - 176 °F        		ISO 11359-1/2
        

        Melting Point 220 °C428 °FISO 11357-1/3
        

        Deflection Temperature at 0.46 MPa (66 psi) 220 °C428 °FHDT/B; ISO 75-2
        

        Deflection Temperature at 1.8 MPa (264 psi) 210 °C410 °FHDT/A; ISO 75-2
        

        Deflection Temperature at 8.0 MPa 150 °C302 °FHDT/C; ISO 75-2
        

        Flammability, UL94 HB
        @Thickness 1.60 mm        		HB
        @Thickness 0.0630 in
        

        Glow Wire Test 650 °C
        @Thickness 1.60 mm        		1200 °F
        @Thickness 0.0630 in        		ICE 60695-12
        

         
        Processing PropertiesMetricEnglishComments
        Feed Temperature 60.0 - 80.0 °C140 - 176 °F
        

        Nozzle Temperature 240 - 280 °C464 - 536 °F
        

        Zone 1 225 - 300 °C437 - 572 °F
        

        Zone 2 225 - 300 °C437 - 572 °F
        

        Zone 3 225 - 300 °C437 - 572 °F
        

        Zone 4 225 - 300 °C437 - 572 °F
        

        Melt Temperature 260 - 300 °C500 - 572 °F
        

        Mold Temperature 80.0 - 100 °C176 - 212 °F
        

        Drying Temperature 80.0 °C176 °F
        

        Dry Time 4 - 12.0 hour4 - 12.0 hour
        

        Injection Pressure 100 MPa14500 psi
        

        Hold Pressure 75.0 MPa10900 psi
        

        Back Pressure 0.400 - 1.00 MPa58.0 - 145 psi
        

         
        Descriptive Properties
        Rate acc. FMVSS 302 (<100/min)Passed
        Rate acc. FMVSS 302,(<100/min)FMVSS 302, >1 [mm] Thickness
        Resistance to  Oleic acidPass100% Conc. at 23°C
        Resistance to AcetaldehydeFail40% Conc. at 23°C
        Resistance to Acetic AcidPass20% Conc. at 23°C
        Resistance to AcetonePass100% Conc. at 23°C
        Resistance to AcetonitrilePass100% Conc. at 23°C
        Resistance to AcrylonitrilePass100% Conc. at 23°C
        Resistance to Allyl alcoholFail96% Conc. at 23°C
        Resistance to Amyl alcoholPass100% Conc. at 23°C
        Resistance to Aqueous AmmoniaPass10% Conc. at 23°C
        Resistance to BenzeneFail100% Conc. at 40°C
         Pass100% Conc. at 23°C
         Pass100% Conc. at 23°C
        Resistance to BiodieselPass100% Conc. at 23°C
        Resistance to Boric acidFail100% Conc. at 23°C
         Pass10% Conc. at 23°C
        Resistance to Brake fluid (DOT 4)Fail100% Conc. at 130°C
         Pass100% Conc. at 23°C
        Resistance to Calcium chloride, alcoholicFail10% Conc. at 23°C
        Resistance to Calcium chloride, aqueousPass10% Conc. at 23°C
        Resistance to Carbonic acidPass100% Conc. at 60°C
        Resistance to Caustic potash solution, aqueousPass50% Conc. at 23°C
        Resistance to Chloracetic acidFail50% Conc. at 23°C
        Resistance to ChlorineFail100% Conc. at 23°C
        Resistance to Chlorine waterFail100% Conc. at 23°C
        Resistance to Chromic acidFail10% Conc. at 23°C
        Resistance to CyclohexanePass100% Conc. at 23°C
        Resistance to CyclohexanolPass100% Conc. at 23°C
        Resistance to Dichloro-Acetic acidFail50% Conc. at 23°C
        Resistance to Diesel fuel (DIN 51601)Pass100% Conc. at 23°C
        Resistance to EthanolPass96% Conc. at 23°C
        Resistance to Ethylene glycol/waterFail50% Conc. at 120°C
        Resistance to Formaldehyde, aqueousPass10% Conc. at 23°C
        Resistance to Formic acidFail2% Conc. at 23°C
        Resistance to GlycerinPass100% Conc. at 23°C
        Resistance to Hydraulic oil H and HL (DIN 51524)Pass100% Conc. at 100°C
        Resistance to Hydrogen chloride, gasFail100% Conc. at 23°C
        Resistance to Iso-octanolPass100% Conc. at 23°C
        Resistance to IsopropanolPass100% Conc. at 23°C
        Resistance to MethanolPass100% Conc. at 23°C
        Resistance to Methylene chlorideFail100% Conc. at 23°C
        Resistance to Motor oil (SAE 10W-40)Pass100% Conc. at 130°C
         Pass100% Conc. at 23°C
        Resistance to Natural GasPass100% Conc. at 23°C
        Resistance to Nitric acidFail40% Conc. at 23°C
        Resistance to OzoneFail100% Conc. at 23°C
        Resistance to PhenolFail100% Conc. at 23°C
        Resistance to Phosphoric acidFail30% Conc. at 23°C
        Resistance to Potassium chloride, aqueousPass10% Conc. at 23°C
        Resistance to Potassium permanganate, aqueousFail10% Conc. at 23°C
        Resistance to Sodium chloride, aqueousPass10% Conc. at 23°C
        Resistance to Sodium hydroxide solution, aqueousPass1% Conc. at 23°C
        Resistance to Sodium hypochlorite, aqueousFail10% Conc. at 23°C
        Resistance to Transmission oil (ATF m 1375.4)Pass100% Conc. at 150°C
        Resistance to Urea, aqueousPass20% Conc. at 23°C
        Resistant to Carbon disulphidePass100% Conc. at 23°C
        Resistant to Carbon tetrachloridePass100% Conc. at 23°C
        Resistant to Citric acidPass10% Conc. at 23°C
        Resistant to Ethyl acetatePass100% Conc. at 23°C
        Resistant to Hydrochloric acidFail36% Conc. at 23°C
        Resistant to Hydrogen peroxideFail23°C
        Resistant to SeawaterPass100% Conc. at 23°C
        Resistant to Silicone fluidPass23°C
        Resistant to Sulphuric acidFail96% Conc. at 23°C
        Resistant to Super-grade petrol (DIN 51600)Pass100% Conc. at 23°C
        Resistant to ToluolPass100% Conc. at 23°C
        Resistant to WaterPass100% Conc. up to 50°C
        Resistant to XylolPass100% Conc. at 23°C
        Resistant to Zinc chloride, aqueousFail50% Conc. at 23°C
        
  
  

  

  
        
                        
        
                        
                    
        
                
        





                

                
        
                    
        轉載請注明: 轉自中國塑膠原料之家 http://www.spnmy.cn/wuxingbiao/
        
                    
        本文鏈接: http://www.spnmy.cn/yuanliaoku/show-45826.html  
        
                    
        免責聲明: 本文 Akro-Plastic Akromid? B3 GF 30 (2472) PA 6 Dry, 30% Glass Filled 僅代表作者個人觀點，中國塑膠原料之家無關。中國塑膠原料之家網所轉載的內容，其版權均由原作者和資料提供方所擁有！如因作品版權問題需要處理，請與我們聯絡  
        
                
        

                




            
        
        
        
    
        



    
        
        
        
            
        
                
        
                    
        
                        塑膠原料之家，專業塑料網站、原料報價網站，免費發布塑膠供求信息。塑膠原料之家為您提供塑料供應、塑料求購、塑料行情、塑料展會、塑料原料資訊服務。
                    
        
                    
        
                        2008-2015 塑料|塑膠原料|物性表大全|UL黃卡|SGS報告查詢|最新價格--塑膠原料之家
                    
        
                    
        
                      滬ICP備15027283號-4
                    
        
                
        

            
        
        
        
    
        

    
    
    




主站蜘蛛池模板：
午夜精品无人区乱码1区2区|
日韩 一区二区在线观看|
国产亚洲精品黑人粗大精选|
蜜桃视频在线观看网站免费|
日本3d黄动漫的在线观看|
西西人体大胆444WWW|
国产系列高清精品第一页|
日本一区二区三区东京热|
人妻中文字幕亚洲精品|
国产精品黄大片在线播放|
99在线精品国自产拍中文字幕|
人妻聚色窝窝人体WWW一区|
婷婷久久香蕉五月综合加勒比
|
一区二区三区精品偷拍|
久久五月丁香激情综合|
国产亚洲一在无在线观看|
国产精品中文字幕在线|
国产欧美日韩精品丝袜高跟鞋|
十四以下岁毛片带血a级|
久久无码高潮喷水|
欧美成人看片黄A免费看|
久久国产综合精品swag蓝导航
|
亚洲美腿丝袜福利一区|
亚洲日韩久热中文字幕|
久久精品无码一区二区无码|
亚洲第一香蕉视频啪啪爽|
一本大道无码日韩精品影视|
国产精品日韩深夜福利久久|
国产女人在线视频|
九九热久久只有精品2|
欧美 亚洲 日韩 在线综合|
97久久久亚洲综合久久|
免费看成人毛片无码视频|
亚洲最大天堂无码精品区|
中文字幕人妻日韩精品|
91精品免费久久久|
116美女极品a级毛片|
人妻无码熟妇乱又伦精品视频
|
蜜桃视频在线观看网站免费|
一区二区丝袜美腿视频|
久久精品免费无码区|