欧美怡春院一区二区三区,福利视频一区二区在线,久久精品人人槡人妻人人玩,国产精品一区二区久久精品无码,99国产欧美另类久久久精品

熔體流動速率 [g/10min]: 3.0
密度 [g/cm3]: 1.2
吸水率 [%]: 0.2
缺口沖擊強度: 0.25
拉伸強度 [MPa]: 30.0
斷裂伸長率 [%]: 50.0
彎曲強度 [MPa]: 17.2
彎曲模量 [MPa]: 0.0588
硬度: 100.0
熱變形溫度 [℃]: 190.0

Physical Properties	Metric	English	Comments

Density	1.20 - 1.62 g/cc	0.0434 - 0.0585 lb/in3	Average value: 1.38 g/cc Grade Count:76
Filler Content	25.0 - 30.0 %	25.0 - 30.0 %	Average value: 28.3 % Grade Count:3
Water Absorption	0.200 - 8.00 %	0.200 - 8.00 %	Average value: 3.82 % Grade Count:51
Moisture Absorption at Equilibrium	0.170 - 3.00 %	0.170 - 3.00 %	Average value: 1.86 % Grade Count:33
Water Absorption at Saturation	6.00 - 7.50 %	6.00 - 7.50 %	Average value: 6.56 % Grade Count:5
Viscosity Measurement	0.840 - 145	0.840 - 145	Average value: 132 Grade Count:11
Maximum Moisture Content	0.100	0.100	Average value: 0.100 Grade Count:4
Linear Mold Shrinkage	0.00150 - 0.0190 cm/cm	0.00150 - 0.0190 in/in	Average value: 0.00816 cm/cm Grade Count:60
Linear Mold Shrinkage, Transverse	0.00400 - 0.0189 cm/cm	0.00400 - 0.0189 in/in	Average value: 0.00901 cm/cm Grade Count:26
Melt Flow	3.00 - 81.6 g/10 min	3.00 - 81.6 g/10 min	Average value: 43.7 g/10 min Grade Count:21

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell M	82.0 - 93.0	82.0 - 93.0	Average value: 86.4 Grade Count:7
Hardness, Rockwell R	100 - 121	100 - 121	Average value: 117 Grade Count:7
Hardness, Shore D	73.0 - 85.0	73.0 - 85.0	Average value: 80.5 Grade Count:4
Ball Indentation Hardness	70.0 - 205 MPa	10200 - 29700 psi	Average value: 151 MPa Grade Count:10
Tensile Strength, Ultimate	17.2 - 128 MPa	2500 - 18500 psi	Average value: 64.4 MPa Grade Count:53
	23.0 - 107 MPa @Temperature -40.0 - 120 °C	3340 - 15500 psi @Temperature -40.0 - 248 °F	Average value: 40.4 MPa Grade Count:5
	5.15 - 113.65 MPa @Temperature -20.0 - 150 °C	747 - 16484 psi @Temperature -4.00 - 302 °F	Average value: 40.4 MPa Grade Count:1
	5.15 - 113.65 MPa @Strain 0.390 - 15.6 %	747 - 16484 psi @Strain 0.390 - 15.6 %	Average value: 40.4 MPa Grade Count:1
Tensile Strength, Yield	30.0 - 103 MPa	4350 - 14900 psi	Average value: 72.3 MPa Grade Count:23
Elongation at Break	1.00 - 70.0 %	1.00 - 70.0 %	Average value: 14.9 % Grade Count:59
Elongation at Yield	2.50 - 40.0 %	2.50 - 40.0 %	Average value: 9.84 % Grade Count:9
Modulus of Elasticity	1.70 - 9.00 GPa	247 - 1310 ksi	Average value: 4.63 GPa Grade Count:45
Flexural Yield Strength	50.0 - 190 MPa	7250 - 27500 psi	Average value: 115 MPa Grade Count:40
	53.0 - 168 MPa @Temperature -40.0 - 80.0 °C	7690 - 24400 psi @Temperature -40.0 - 176 °F	Average value: 114 MPa Grade Count:1
Flexural Modulus	0.0588 - 7.58 GPa	8.53 - 1100 ksi	Average value: 4.13 GPa Grade Count:47
	0.800 - 8.00 GPa @Temperature -40.0 - 120 °C	116 - 1160 ksi @Temperature -40.0 - 248 °F	Average value: 2.45 GPa Grade Count:5
Izod Impact, Notched	0.250 - 2.60 J/cm	0.468 - 4.87 ft-lb/in	Average value: 0.662 J/cm Grade Count:25
	0.200 - 0.680 J/cm @Temperature -40.0 - -20.0 °C	0.375 - 1.27 ft-lb/in @Temperature -40.0 - -4.00 °F	Average value: 0.370 J/cm Grade Count:4
Izod Impact, Notched (ISO)	2.60 - 15.0 kJ/m2	1.24 - 7.14 ft-lb/in2	Average value: 8.03 kJ/m2 Grade Count:16
	4.00 - 8.00 kJ/m2 @Temperature -30.0 - -30.0 °C	1.90 - 3.81 ft-lb/in2 @Temperature -22.0 - -22.0 °F	Average value: 5.67 kJ/m2 Grade Count:3
Izod Impact, Unnotched (ISO)	35.0 - 35.0 kJ/m2 @Temperature -30.0 - -30.0 °C	16.7 - 16.7 ft-lb/in2 @Temperature -22.0 - -22.0 °F	Average value: 35.0 kJ/m2 Grade Count:1
Charpy Impact Unnotched	1.30 J/cm2 - NB	6.19 ft-lb/in2 - NB	Average value: 8.37 J/cm2 Grade Count:47
	1.20 J/cm2 - NB @Temperature -40.0 - 30.0 °C	5.71 ft-lb/in2 - NB @Temperature -40.0 - 86.0 °F	Average value: 5.29 J/cm2 Grade Count:27
Charpy Impact, Notched	0.280 - 1.80 J/cm2	1.33 - 8.57 ft-lb/in2	Average value: 0.732 J/cm2 Grade Count:39
	0.100 - 1.00 J/cm2 @Temperature -30.0 - 30.0 °C	0.476 - 4.76 ft-lb/in2 @Temperature -22.0 - 86.0 °F	Average value: 0.438 J/cm2 Grade Count:21
Tensile Creep Modulus, 1 hour	0.000 - 17.5 MPa @Temperature 60.0 - 90.0 °C	0.000 - 2540 psi @Temperature 140 - 194 °F	Average value: 6.88 MPa Grade Count:1
	0.000 - 17.5 MPa @Strain 0.000 - 3.04 %	0.000 - 2540 psi @Strain 0.000 - 3.04 %	Average value: 6.88 MPa Grade Count:1
Tensile Creep Modulus, 1000 hours	0.000 - 800 MPa	0.000 - 116000 psi	Average value: 95.6 MPa Grade Count:4
	0.000 - 17.5 MPa @Temperature 60.0 - 90.0 °C	0.000 - 2540 psi @Temperature 140 - 194 °F	Average value: 6.88 MPa Grade Count:1
	0.000 - 17.5 MPa @Strain 0.000 - 3.78 %	0.000 - 2540 psi @Strain 0.000 - 3.78 %	Average value: 6.88 MPa Grade Count:1

Electrical Properties	Metric	English	Comments
Electrical Resistivity	1.00e+9 - 1.00e+16 ohm-cm	1.00e+9 - 1.00e+16 ohm-cm	Average value: 7.30e+14 ohm-cm Grade Count:39
Surface Resistance	1.00e+10 - 1.00e+16 ohm	1.00e+10 - 1.00e+16 ohm	Average value: 1.47e+15 ohm Grade Count:22
Dielectric Constant	3.00 - 15.0	3.00 - 15.0	Average value: 5.03 Grade Count:18
Dielectric Strength	11.8 - 100 kV/mm	300 - 2540 kV/in	Average value: 28.7 kV/mm Grade Count:26
Dissipation Factor	0.00500 - 0.350	0.00500 - 0.350	Average value: 0.0868 Grade Count:17
Arc Resistance	120 - 185 sec	120 - 185 sec	Average value: 155 sec Grade Count:3
Comparative Tracking Index	250 - 600 V	250 - 600 V	Average value: 482 V Grade Count:42

Thermal Properties	Metric	English	Comments
CTE, linear	0.500 - 500 μm/m-°C	0.278 - 278 μin/in-°F	Average value: 81.4 μm/m-°C Grade Count:28
CTE, linear, Transverse to Flow	0.500 - 102 μm/m-°C	0.278 - 56.7 μin/in-°F	Average value: 53.7 μm/m-°C Grade Count:14
Thermal Conductivity	0.310 W/m-K	2.15 BTU-in/hr-ft2-°F	Average value: 0.310 W/m-K Grade Count:6
Melting Point	210 - 225 °C	410 - 437 °F	Average value: 220 °C Grade Count:57
Maximum Service Temperature, Air	65.0 - 180 °C	149 - 356 °F	Average value: 130 °C Grade Count:16
Deflection Temperature at 0.46 MPa (66 psi)	190 - 240 °C	374 - 464 °F	Average value: 201 °C Grade Count:33
Deflection Temperature at 1.8 MPa (264 psi)	65.0 - 250 °C	149 - 482 °F	Average value: 121 °C Grade Count:61
Deflection Temperature at 8.0 MPa	50.0 °C	122 °F	Average value: 50.0 °C Grade Count:3
Vicat Softening Point	191 - 255 °C	376 - 491 °F	Average value: 206 °C Grade Count:20
Decomposition Temperature	300 °C	572 °F	Average value: 300 °C Grade Count:4
UL RTI, Electrical	65.0 - 140 °C	149 - 284 °F	Average value: 108 °C Grade Count:11
UL RTI, Mechanical with Impact	65.0 - 120 °C	149 - 248 °F	Average value: 90.7 °C Grade Count:11
UL RTI, Mechanical without Impact	65.0 - 140 °C	149 - 284 °F	Average value: 108 °C Grade Count:11
Flammability, UL94	HB - V-0	HB - V-0	Grade Count:55
Oxygen Index	22.0 - 32.0 %	22.0 - 32.0 %	Average value: 25.4 % Grade Count:11
Glow Wire Test	649 - 960 °C	1200 - 1760 °F	Average value: 753 °C Grade Count:22

Processing Properties	Metric	English	Comments
Processing Temperature	80.0 - 300 °C	176 - 572 °F	Average value: 163 °C Grade Count:7
Feed Temperature	60.0 - 235 °C	140 - 455 °F	Average value: 111 °C Grade Count:4
Nozzle Temperature	210 - 293 °C	410 - 560 °F	Average value: 257 °C Grade Count:5
Melt Temperature	80.0 - 370 °C	176 - 698 °F	Average value: 258 °C Grade Count:43
Mold Temperature	50.0 - 120 °C	122 - 248 °F	Average value: 80.8 °C Grade Count:34
Drying Temperature	75.0 - 110 °C	167 - 230 °F	Average value: 85.1 °C Grade Count:34
Dry Time	2.00 - 6.00 hour	2.00 - 6.00 hour	Average value: 3.60 hour Grade Count:24
Moisture Content	0.0500 - 2.00 %	0.0500 - 2.00 %	Average value: 0.275 % Grade Count:14
Injection Pressure	30.0 - 138 MPa	4350 - 20000 psi	Average value: 90.6 MPa Grade Count:10

Overview of materials for Nylon 6, 30% Mineral Filled