- 吸水率 [%]: 0.5
- 缺口沖擊強(qiáng)度: 1.67
- 彎曲模量 [MPa]: 2.37402
- 熱變形溫度 [℃]: 204.0
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.13 g/cc | 1.13 g/cc | ASTM D792 |
| Water Absorption | 0.50 % @Time 86400 sec | 0.50 % @Time 24.0 hour | |
| Linear Mold Shrinkage | 0.017 cm/cm | 0.017 in/in | |
| Linear Mold Shrinkage, Transverse | 0.013 cm/cm | 0.013 in/in | |
| Mechanical Properties | Metric | English | Comments |
| Tensile Strength | 66.708 MPa | 9675.2 psi | ASTM D638 |
| Elongation at Break | 50 % | 50 % | ASTM D638 |
| Flexural Strength | 99.08 MPa | 14370 psi | ASTM D790 |
| Flexural Modulus | 2.37402 GPa | 344.323 ksi | ASTM D790 |
| Izod Impact, Notched | 1.67 J/cm | 3.12 ft-lb/in | ASTM D256 |
| Thermal Properties | Metric | English | Comments |
| Deflection Temperature at 0.46 MPa (66 psi) | 204 °C | 399 °F | ASTM D648 |
| Deflection Temperature at 1.8 MPa (264 psi) | 125 °C | 257 °F | ASTM D648 |
| Flammability, UL94 | HB | HB | |
| Processing Properties | Metric | English | Comments |
| Melt Temperature | 260 - 290 °C | 500 - 554 °F | |
| Mold Temperature | 60.0 - 80.0 °C | 140 - 176 °F | |