- 吸水率 [%]: 0.8
- 缺口沖擊強度: 1.44
- 拉伸強度 [MPa]: 110.0
- 彎曲模量 [MPa]: 0.621
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Specific Gravity | 1.16 g/cc | 1.16 g/cc | ASTM D792 | ||
| Water Absorption | 0.80 % @Time 86400 sec | 0.80 % @Time 24.0 hour | ASTM D570 | ||
| Water Absorption at Saturation | 6.3 % @Temperature 22.8 °C | 6.3 % @Temperature 73.0 °F | ASTM D570 | ||
| Mechanical Properties | Metric | English | Comments | ||
| Tensile Strength, Yield | 110 MPa | 16000 psi | ASTM D638 | ||
| Elongation at Break | 4.0 % | 4.0 % | ASTM D638 | ||
| Tensile Modulus | 8.96 GPa | 1300 ksi | ASTM D638 | ||
| Flexural Strength | 159 MPa | 23000 psi | ASTM D790 | ||
| Flexural Modulus | 0.621 GPa | 90.0 ksi | ASTM D790 | ||
| Compressive Strength | 133 MPa | 19300 psi | ASTM D695 | ||
| Izod Impact, Notched | 1.44 J/cm | 2.70 ft-lb/in | ASTM D256 | ||
| K Factor (Wear Factor) | 79 - 128 | 79 - 128 | ASTM Thrust Washer Test: PV=2,500; P=250 psi; V=10 fpm; ASTM D3702 | ||
| Thermal Properties | Metric | English | Comments | ||
| CTE, linear | 28.8 μm/m-°C | 16.0 μin/in-°F | ASTM D696 | ||
| Maximum Service Temperature, Air | 149 °C | 300 °F | continuous | ||
| Deflection Temperature at 1.8 MPa (264 psi) | 243 °C | 470 °F | ASTM D648 | ||
| Descriptive Properties | |||||
| Base Material | Aramid | ||||