- 密度 [g/cm3]: 1.39
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Density | 1.39 g/cc | 0.0502 lb/in3 | DAM; ISO 1183 | ||
| Filler Content | 33 % | 33 % | DAM | ||
| Linear Mold Shrinkage, Flow | 0.0030 cm/cm @Thickness 2.00 mm | 0.0030 in/in @Thickness 0.0787 in | Parallel; DAM; ISO 294-4 | ||
| Linear Mold Shrinkage, Transverse | 0.0090 cm/cm @Thickness 2.00 mm | 0.0090 in/in @Thickness 0.0787 in | Normal; DAM; ISO 294-4 | ||
| Mechanical Properties | Metric | English | Comments | ||
| Tensile Strength at Break | 194 MPa @Temperature 23.0 °C | 28100 psi @Temperature 73.4 °F | DAM; ISO 527 | ||
| Elongation at Break | 4.1 % @Temperature 23.0 °C | 4.1 % @Temperature 73.4 °F | DAM; ISO 527 | ||
| Tensile Modulus | 10.9 GPa @Temperature 23.0 °C | 1580 ksi @Temperature 73.4 °F | DAM; ISO 527 | ||
| Charpy Impact, Notched | 1.23 J/cm2 @Temperature -40.0 °C | 5.85 ft-lb/in2 @Temperature -40.0 °F | DAM; ISO 179/1eA | ||
| 1.62 J/cm2 @Temperature 23.0 °C | 7.71 ft-lb/in2 @Temperature 73.4 °F | DAM; ISO 179/1eA | |||
| Thermal Properties | Metric | English | Comments | ||
| Deflection Temperature at 1.8 MPa (264 psi) | 225 °C | 437 °F | DAM; ISO 75-1/-2 | ||
| Processing Properties | Metric | English | Comments | ||
| Melt Temperature | 290 °C | 554 °F | DAM; Optimum | ||
| 280 - 300 °C | 536 - 572 °F | DAM | |||
| Mold Temperature | 70.0 - 120 °C | 158 - 248 °F | DAM | ||
| 100 °C | 212 °F | DAM; optimum | |||
| Drying Temperature | 80.0 °C | 176 °F | DAM | ||
| Dry Time | 2.00 - 4.00 hour | 2.00 - 4.00 hour | DAM | ||
| Descriptive Properties | |||||
| Appearance | Natural Color | DAM | |||
| Features | Wear Resistance, Good | DAM | |||
| Filler | Glass Reinforced | DAM | |||
| Forms | Pellets | DAM | |||
| Generic | Nylon 66 | DAM | |||
| Material Status | Preliminary Data | DAM | |||
| Part Marking Code | >PA66+PA6-GF33< | ISO 11469; DAM | |||
| Processing Method | Injection Molding | DAM | |||
| Product Category | Glass Reinforced Resins | DAM | |||
| UV Resistant/Weatherable Resins | DAM | ||||
| Region Available - Global | Yes | DAM | |||
| Resin Identification | PA66+PA6-GF33 | ISO 1043; DAM | |||
| RoHS Compliance | Contact Manufacturer | DAM | |||