• <samp id="w83am"><delect id="w83am"></delect></samp>
        2. 

        <strong id="w83am"></strong>
        <bdo id="w83am"></bdo>
        

        
日本亚洲欧洲无免费码在线,亚洲婷婷六月的婷婷,亚洲精品国产综合久久一线,国产精品香港三级国产av,国模粉嫩小泬视频在线观看,h动态图男女啪啪27报gif,猫咪社区免费资源在线观看,亚洲国产精品成人av网 


    

    
    
        
        
          
            
        1. 首頁
          2. 
            
        2. 英文物性
          3. 
            
        3. PA66
          4. 
            
        4. DuPont Performance Polymers Zytel? 8018HS BKB085 Nylon 66
          5. 
        
        
        
        
            
        


                
        

                
        DuPont Performance Polymers Zytel? 8018HS BKB085 Nylon 66
        
                
        DuPont Performance Polymers Zytel? 8018HS BKB085 Nylon 66 物性表: DuPont Performance Polymers Zytel? 8018HS BKB085 Nylon 66物性表及特性介紹,DuPont Performance Polymers Zytel? 8018HS BKB085 Nylon 66注塑參數詳情,如需DuPont Performance Polymers Zytel? 8018HS BKB085 Nylon 66下載, 可到相關下載區下載
        

                
        
                    
        
                        
        

                            
          
                                
                                
        • 密度 [g/cm3]: 1.19
          • 
                                
                                
        • 缺口沖擊強度: 1.4
          • 
                                
                                
        • 彎曲模量 [MPa]: 3.60
          • 
                                
                                
        • 硬度: 110.0
          • 
                                
                                
        • 熱變形溫度 [℃]: 246.0
          • 
                                
                            
        

                            
         
        Physical PropertiesMetricEnglishComments
        Specific Gravity 1.19 g/cc1.19 g/ccDAM; ASTM D792
        

        Density 1.19 g/cc0.0430 lb/in3DAM; ISO 1183
        

        Filler Content 14 %14 %DAM
        

         
        Mechanical PropertiesMetricEnglishComments
        Hardness, Rockwell M 7070DAM; ISO 2039/2
        

        Hardness, Rockwell R 110110DAM; ISO 2039/2
        

        Tensile Strength at Break 85.0 MPa
        @Temperature 23.0 °C        		12300 psi
        @Temperature 73.4 °F        		DAM; ISO 527
        

        Tensile Strength 90.0 MPa
        @Temperature 23.0 °C        		13100 psi
        @Temperature 73.4 °F        		DAM; ASTM D638
        

        Elongation at Break  6.0 %
        @Temperature 23.0 °C        		6.0 %
        @Temperature 73.4 °F        		DAM; ASTM D638
        

         9.0 %
        @Temperature 23.0 °C        		9.0 %
        @Temperature 73.4 °F        		DAM; ISO 527
        

        Tensile Modulus 4.20 GPa
        @Temperature 23.0 °C        		609 ksi
        @Temperature 73.4 °F        		DAM; ISO 527
        

        Flexural Modulus  3.60 GPa
        @Temperature 23.0 °C        		522 ksi
        @Temperature 73.4 °F        		DAM; ISO 178
        

         3.66 GPa
        @Temperature 23.0 °C        		531 ksi
        @Temperature 73.4 °F        		DAM; ASTM D790
        

        Izod Impact, Notched 1.40 J/cm
        @Temperature 23.0 °C        		2.62 ft-lb/in
        @Temperature 73.4 °F        		DAM; ASTM D256
        

        Izod Impact, Unnotched 9.60 J/cm
        @Temperature 23.0 °C        		18.0 ft-lb/in
        @Temperature 73.4 °F        		DAM; ASTM D4812
        

        Izod Impact, Notched (ISO)  7.00 kJ/m2
        @Temperature -40.0 °C        		3.33 ft-lb/in2
        @Temperature -40.0 °F        		DAM; ISO 180/1A
        

         13.0 kJ/m2
        @Temperature 23.0 °C        		6.19 ft-lb/in2
        @Temperature 73.4 °F        		DAM; ISO 180/1A
        

        Charpy Impact, Notched  0.400 J/cm2
        @Temperature -40.0 °C        		1.90 ft-lb/in2
        @Temperature -40.0 °F        		DAM; ISO 179/1eA
        

         1.20 J/cm2
        @Temperature 23.0 °C        		5.71 ft-lb/in2
        @Temperature 73.4 °F        		DAM; ISO 179/1eA
        

         
        Electrical PropertiesMetricEnglishComments
        Comparative Tracking Index 580 V
        @Temperature 23.0 °C        		580 V
        @Temperature 73.4 °F        		DAM; UL 746A
        

         
        Thermal PropertiesMetricEnglishComments
        CTE, linear, Parallel to Flow  500 μm/m-°C
        @Temperature -40.0 - 23.0 °C        		278 μin/in-°F
        @Temperature -40.0 - 73.4 °F        		DAM; ASTM E 831
        

         500 μm/m-°C
        @Temperature 23.0 - 55.0 °C        		278 μin/in-°F
        @Temperature 73.4 - 131 °F        		DAM; ASTM E 831
        

         500 μm/m-°C
        @Temperature 55.0 - 160 °C        		278 μin/in-°F
        @Temperature 131 - 320 °F        		DAM; ASTM E 831
        

         500 μm/m-°C
        @Temperature -40.0 - 23.0 °C        		278 μin/in-°F
        @Temperature -40.0 - 73.4 °F        		DAM; ISO 11359-1/-2
        

         500 μm/m-°C
        @Temperature 23.0 - 55.0 °C        		278 μin/in-°F
        @Temperature 73.4 - 131 °F        		DAM; ISO 11359-1/-2
        

         500 μm/m-°C
        @Temperature 55.0 - 160 °C        		278 μin/in-°F
        @Temperature 131 - 320 °F        		DAM; ISO 11359-1/-2
        

        CTE, linear, Transverse to Flow  96.0 μm/m-°C
        @Temperature -40.0 - 23.0 °C        		53.3 μin/in-°F
        @Temperature -40.0 - 73.4 °F        		DAM; ASTM E 831
        

         96.0 μm/m-°C
        @Temperature -40.0 - 23.0 °C        		53.3 μin/in-°F
        @Temperature -40.0 - 73.4 °F        		DAM; ISO 11359-1/-2
        

         118 μm/m-°C
        @Temperature 23.0 - 55.0 °C        		65.6 μin/in-°F
        @Temperature 73.4 - 131 °F        		DAM; ASTM E 831
        

         118 μm/m-°C
        @Temperature 23.0 - 55.0 °C        		65.6 μin/in-°F
        @Temperature 73.4 - 131 °F        		DAM; ISO 11359-1/-2
        

         123 μm/m-°C
        @Temperature 55.0 - 160 °C        		68.3 μin/in-°F
        @Temperature 131 - 320 °F        		DAM; ASTM E 831
        

         123 μm/m-°C
        @Temperature 55.0 - 160 °C        		68.3 μin/in-°F
        @Temperature 131 - 320 °F        		DAM; ISO 11359-1/-2
        

        Melting Point 263 °C505 °FDAM; ASTM D3418
        

        Deflection Temperature at 0.46 MPa (66 psi) 246 °C475 °FDAM; ISO 75-1/-2
        

        Deflection Temperature at 1.8 MPa (264 psi) 195 °C383 °FDAM; ISO 75-1/-2
        

         205 °C401 °FDAM; ASTM D648
        

        UL RTI, Electrical  120 °C
        @Thickness 3.00 mm        		248 °F
        @Thickness 0.118 in        		DAM; UL 746B
        

         120 °C
        @Thickness 1.50 mm        		248 °F
        @Thickness 0.0591 in        		DAM; UL 746B
        

         120 °C
        @Thickness 0.750 mm        		248 °F
        @Thickness 0.0295 in        		DAM; UL 746B
        

        UL RTI, Mechanical with Impact  65.0 °C
        @Thickness 0.750 mm        		149 °F
        @Thickness 0.0295 in        		DAM; UL 746B
        

         95.0 °C
        @Thickness 1.50 mm        		203 °F
        @Thickness 0.0591 in        		DAM; UL 746B
        

         105 °C
        @Thickness 3.00 mm        		221 °F
        @Thickness 0.118 in        		DAM; UL 746B
        

        UL RTI, Mechanical without Impact  85.0 °C
        @Thickness 0.750 mm        		185 °F
        @Thickness 0.0295 in        		DAM; UL 746B
        

         105 °C
        @Thickness 1.50 mm        		221 °F
        @Thickness 0.0591 in        		DAM; UL 746B
        

         105 °C
        @Thickness 3.00 mm        		221 °F
        @Thickness 0.118 in        		DAM; UL 746B
        

        Flammability, UL94  HB
        @Thickness 0.750 mm        		HB
        @Thickness 0.0295 in        		DAM; IEC 60695-11-10
        

         HB
        @Thickness 1.50 mm        		HB
        @Thickness 0.0591 in        		DAM; IEC 60695-11-10
        

         HB
        @Thickness 3.00 mm        		HB
        @Thickness 0.118 in        		DAM; IEC 60695-11-10
        

         HB
        @Thickness 3.00 mm        		HB
        @Thickness 0.118 in        		DAM; UL94
        

         HB
        @Thickness 1.50 mm        		HB
        @Thickness 0.0591 in        		DAM; UL94
        

         HB
        @Thickness 0.750 mm        		HB
        @Thickness 0.0295 in        		DAM; UL94
        

         
        Processing PropertiesMetricEnglishComments
        Melt Temperature 263 °C505 °F10°C/min; DAM; ISO 11357-1/-3
        

         295 °C563 °FDAM; Optimum
        

         285 - 305 °C545 - 581 °FDAM
        

        Mold Temperature 50.0 - 100 °C122 - 212 °FDAM
        

         80.0 °C176 °FDAM; optimum
        

        Drying Temperature 80.0 °C176 °FDAM
        

        Dry Time 2.00 - 4.00 hour2.00 - 4.00 hourDAM
        

        Moisture Content <= 0.20 %<= 0.20 %DAM
        

         
        Descriptive Properties
        AdditiveHeat StabilizerDAM
        AppearanceBlack ColorDAM
         Colors AvailableDAM
        Drying RecommendedYes, if moisture content of resin exceeds recommended levelDAM
        FeaturesImpact Resistance, HighDAM
         Toughness, GoodDAM
        FillerGlass fiber reinforcementDAM
        FormsPelletsDAM
        GenericNylon 66DAM
        Heat StabilizedYesDAM
        Material StatusCurrentDAM
        Part Marking Code>PA66-IGF14<ISO 11469; DAM
        Polymer FamilyPolyamideDAM
        Polymer TypePA66DAM
        Processing MethodInjection MoldingDAM
        Product CategoryGlass Reinforced ResinsDAM
         Toughened ResinsDAM
        Resin IdentificationPA66-IGF14ISO 1043; DAM
        RoHS ComplianceContact ManufacturerDAM
        Ultrasonic WeldableYesDAM
        UsesAppliance ComponentsDAM
         Automotive ApplicationsDAM
         FastenersDAM
         Industrial ApplicationsDAM
         Sporting GoodsDAM
        
  
  

  

  
        
                        
        
                        
                    
        
                
        





                

                
        
                    
        轉載請注明: 轉自中國塑膠原料之家 http://www.spnmy.cn/wuxingbiao/
        
                    
        本文鏈接: http://www.spnmy.cn/yuanliaoku/show-45473.html  
        
                    
        免責聲明: 本文 DuPont Performance Polymers Zytel? 8018HS BKB085 Nylon 66 僅代表作者個人觀點，中國塑膠原料之家無關。中國塑膠原料之家網所轉載的內容，其版權均由原作者和資料提供方所擁有！如因作品版權問題需要處理，請與我們聯絡  
        
                
        

                




            
        
        
        
    
        



    
        
        
        
            
        
                
        
                    
        
                        塑膠原料之家，專業塑料網站、原料報價網站，免費發布塑膠供求信息。塑膠原料之家為您提供塑料供應、塑料求購、塑料行情、塑料展會、塑料原料資訊服務。
                    
        
                    
        
                        2008-2015 塑料|塑膠原料|物性表大全|UL黃卡|SGS報告查詢|最新價格--塑膠原料之家
                    
        
                    
        
                      滬ICP備15027283號-4
                    
        
                
        

            
        
        
        
    
        

    
    
    




主站蜘蛛池模板：
美女又黄又免费的视频|
亚洲国产一区二区三区|
久热爱精品视频线路一|
久久久久女教师免费一区|
九九热免费精品在线视频|
国产一级淫片免费播放电影|
国产精品爆乳奶水无码视频免费
|
亚洲www啪成人一区二区麻豆|
日韩深夜福利视频在线观看
|
国内少妇人妻偷人精品视频|
一区二区三区成人|
成年在线观看免费人视频|
在线视频中文字幕二区|
亚洲一区二区三区啪啪|
精品亚洲成av人在线观看|
四虎成人精品国产永久免费|
麻豆精品在线|
国产激情国产精品久久源|
黑人巨大精品oideo|
亚洲人成精品久久久久|
亚洲伊人五月丁香激情|
国产一区二区不卡自拍|
亚洲精品毛片一区二区|
一级二级三一片内射视频在线|
国产成人精品区一区二区|
口爆少妇在线视频免费观看|
黄色大全免费看国产精品|
女同AV在线播放|
亚洲国产综合自在线另类|
国产又爽又黄又爽又刺激|
国产精品国产三级在线专区|
精品国产精品午夜福利|
日本福利视频免费久久久|
福利视频一区二区在线|
日韩成人无码v清免费|
久久精品道一区二区三区|
国产精品妇女一二三区|
一区二区偷拍美女撒尿视频|
一级毛片网|
天堂www在线中文|
欧美国产精品不卡在线观看|