• <samp id="w83am"><delect id="w83am"></delect></samp>
        2. 

        <strong id="w83am"></strong>
        <bdo id="w83am"></bdo>
        

        
日本亚洲欧洲无免费码在线,亚洲婷婷六月的婷婷,亚洲精品国产综合久久一线,国产精品香港三级国产av,国模粉嫩小泬视频在线观看,h动态图男女啪啪27报gif,猫咪社区免费资源在线观看,亚洲国产精品成人av网 


    

    
    
        
        
          
            
        1. 首頁
          2. 
            
        2. 英文物性
          3. 
            
        3. PA66
          4. 
            
        4. Akro-Plastic Akromid? A3 GF 50 (2423) PA 6.6 Dry, 50% Glass Filled
          5. 
        
        
        
        
            
        


                
        

                
        Akro-Plastic Akromid? A3 GF 50 (2423) PA 6.6 Dry, 50% Glass Filled
        
                
        Akro-Plastic Akromid? A3 GF 50 (2423) PA 6.6 Dry, 50% Glass Filled 物性表: Akro-Plastic Akromid? A3 GF 50 (2423) PA 6.6 Dry, 50% Glass Filled物性表及特性介紹,Akro-Plastic Akromid? A3 GF 50 (2423) PA 6.6 Dry, 50% Glass Filled注塑參數詳情,如需Akro-Plastic Akromid? A3 GF 50 (2423) PA 6.6 Dry, 50% Glass Filled下載, 可到相關下載區下載
        

                
        
                    
        
                        
        

                            
          
                                
                                
        • 密度 [g/cm3]: 1.57
          • 
                                
                                
        • 吸水率 [%]: 1.3
          • 
                                
                                
        • 彎曲模量 [MPa]: 15.2
          • 
                                
                                
        • 熱變形溫度 [℃]: 260.0
          • 
                                
                            
        

                            
         
        Physical PropertiesMetricEnglishComments
        Density 1.57 g/cc
        @Temperature 23.0 °C        		0.0567 lb/in3
        @Temperature 73.4 °F        		ISO 1183
        

        Filler Content 50 %50 %ISO 1172
        

        Water Absorption 1.3 - 1.5 %
        @Temperature 23.0 °C        		1.3 - 1.5 %
        @Temperature 73.4 °F        		50% r.h.; ISO 62
        

        Water Absorption at Saturation 3.7 - 4.3 %
        @Time 82800 sec        		3.7 - 4.3 %
        @Time 23.0 hour        		ISO 62
        

        Linear Mold Shrinkage, Flow 0.0025 cm/cm0.0025 in/inISO 294-4
        

        Linear Mold Shrinkage, Transverse 0.0116 cm/cm0.0116 in/inISO 294-4
        

        Spiral Flow 600 cm236 inCross Section: 7[mm]x3.5[mm]; AKRO
        

         
        Mechanical PropertiesMetricEnglishComments
        Tensile Strength at Break 250 MPa36300 psi5 [mm/min]; ISO 527-1/2
        

          125 MPa
        @Temperature 160 - 175 °C,
         Time 1.80e+7 sec        		18100 psi
        @Temperature 320 - 347 °F,
         Time 5000 hour        		5 [mm/min], 50% Loss of Tensile Strength; ICE 216
        

         125 MPa
        @Temperature 130 - 150 °C,
         Time 7.20e+7 sec        		18100 psi
        @Temperature 266 - 302 °F,
         Time 20000 hour        		5 [mm/min], 50% Loss of Tensile Strength; ICE 216
        

        Elongation at Break 2.5 %2.5 %5 [mm/min]; ISO 527-1/2
        

        Tensile Modulus 16.7 GPa2420 ksi1[mm/min]; ISO 527-1/2
        

          9.00 GPa
        @Temperature 120 °C        		1310 ksi
        @Temperature 248 °F
        

         11.0 GPa
        @Temperature 80.0 °C        		1600 ksi
        @Temperature 176 °F
        

         18.0 GPa
        @Temperature 23.0 °C        		2610 ksi
        @Temperature 73.4 °F
        

        Flexural Strength 380 MPa55100 psi2 [mm/min]; ISO 178
        

        Flexural Modulus 15.2 GPa2200 ksi2 [mm/min]; ISO 178
        

        Shear Modulus  0.100 GPa
        @Temperature 350 °C        		14.5 ksi
        @Temperature 662 °F
        

         0.600 GPa
        @Temperature 300 °C        		87.0 ksi
        @Temperature 572 °F
        

         0.700 GPa
        @Temperature 250 °C        		102 ksi
        @Temperature 482 °F
        

         1.00 GPa
        @Temperature 200 °C        		145 ksi
        @Temperature 392 °F
        

         1.50 GPa
        @Temperature 150 °C        		218 ksi
        @Temperature 302 °F
        

         2.50 GPa
        @Temperature 100 °C        		363 ksi
        @Temperature 212 °F
        

         3.00 GPa
        @Temperature 0.000 °C        		435 ksi
        @Temperature 32.0 °F
        

        Charpy Impact Unnotched  10.5 J/cm2
        @Temperature -30.0 °C        		50.0 ft-lb/in2
        @Temperature -22.0 °F        		ISO 179/1eU
        

         10.5 J/cm2
        @Temperature 23.0 °C        		50.0 ft-lb/in2
        @Temperature 73.4 °F        		ISO 179/1eU
        

        Charpy Impact, Notched  1.60 J/cm2
        @Temperature -30.0 °C        		7.61 ft-lb/in2
        @Temperature -22.0 °F
        

         1.90 J/cm2
        @Temperature 23.0 °C        		9.04 ft-lb/in2
        @Temperature 73.4 °F        		ISO 179/1eA
        

         
        Electrical PropertiesMetricEnglishComments
        Volume Resistivity 1.00e+13 ohm-cm1.00e+13 ohm-cmIEC 60093
        

        Surface Resistance 1.00e+12 ohm1.00e+12 ohmIEC 60093
        

        Comparative Tracking Index 550 V550 VTest Solution A; IEC 60112
        

         
        Thermal PropertiesMetricEnglishComments
        CTE, linear, Parallel to Flow 17.0 μm/m-°C
        @Temperature 23.0 - 80.0 °C        		9.44 μin/in-°F
        @Temperature 73.4 - 176 °F        		ISO 11359-1/2
        

        CTE, linear, Transverse to Flow 88.0 μm/m-°C
        @Temperature 23.0 - 80.0 °C        		48.9 μin/in-°F
        @Temperature 73.4 - 176 °F        		ISO 11359-1/2
        

        Melting Point 262 °C504 °FISO 11357-1/3
        

        Deflection Temperature at 0.46 MPa (66 psi) 260 °C500 °FHDT/B; ISO 75-2
        

        Deflection Temperature at 1.8 MPa (264 psi) 260 °C500 °FHDT/A; ISO 75-2
        

        Deflection Temperature at 8.0 MPa 235 °C455 °FHDT/C; ISO 75-2
        

        Flammability, UL94 HB
        @Thickness 1.60 mm        		HB
        @Thickness 0.0630 in
        

        Glow Wire Test 650 °C
        @Thickness 1.60 mm        		1200 °F
        @Thickness 0.0630 in        		ICE 60695-12
        

         
        Processing PropertiesMetricEnglishComments
        Feed Temperature 60.0 - 80.0 °C140 - 176 °F
        

        Nozzle Temperature 280 - 295 °C536 - 563 °F
        

        Zone 1 260 - 300 °C500 - 572 °F
        

        Zone 2 260 - 300 °C500 - 572 °F
        

        Zone 3 260 - 300 °C500 - 572 °F
        

        Zone 4 260 - 300 °C500 - 572 °F
        

        Melt Temperature 280 - 320 °C536 - 608 °F
        

        Mold Temperature 80.0 - 100 °C176 - 212 °F
        

        Drying Temperature 80.0 °C176 °F
        

        Dry Time 4 - 12.0 hour4 - 12.0 hour
        

        Injection Pressure 100 MPa14500 psi
        

        Hold Pressure 75.0 MPa10900 psi
        

        Back Pressure 0.400 - 1.00 MPa58.0 - 145 psi
        

         
        Descriptive Properties
        Rate acc. FMVSS 302 (<100/min)Passed
        Rate acc. FMVSS 302,(<100/min)FMVSS 302, >1 [mm] Thickness
        Resistance to  Oleic acidPass100% Conc. at 23°C
        Resistance to AcetaldehydeFail40% Conc. at 23°C
        Resistance to Acetic AcidPass20% Conc. at 23°C
        Resistance to AcetonePass100% Conc. at 23°C
        Resistance to AcetonitrilePass100% Conc. at 23°C
        Resistance to AcrylonitrilePass100% Conc. at 23°C
        Resistance to Allyl alcoholFail96% Conc. at 23°C
        Resistance to Amyl alcoholPass100% Conc. at 23°C
        Resistance to Aqueous AmmoniaPass10% Conc. at 23°C
        Resistance to BenzeneFail100% Conc. at 40°C
         Pass100% Conc. at 23°C
         Pass100% Conc. at 23°C
        Resistance to BiodieselPass100% Conc. at 23°C
        Resistance to Boric acidFail100% Conc. at 23°C
         Pass10% Conc. at 23°C
        Resistance to Brake fluid (DOT 4)Fail100% Conc. at 130°C
         Pass100% Conc. at 23°C
        Resistance to Calcium chloride, alcoholicFail10% Conc. at 23°C
        Resistance to Calcium chloride, aqueousPass10% Conc. at 23°C
        Resistance to Carbonic acidPass100% Conc. at 60°C
        Resistance to Caustic potash solution, aqueousPass50% Conc. at 23°C
        Resistance to Chloracetic acidFail50% Conc. at 23°C
        Resistance to ChlorineFail100% Conc. at 23°C
        Resistance to Chlorine waterFail100% Conc. at 23°C
        Resistance to Chromic acidFail10% Conc. at 23°C
        Resistance to CyclohexanePass100% Conc. at 23°C
        Resistance to CyclohexanolPass100% Conc. at 23°C
        Resistance to Dichloro-Acetic acidFail50% Conc. at 23°C
        Resistance to Diesel fuel (DIN 51601)Pass100% Conc. at 23°C
        Resistance to EthanolPass96% Conc. at 23°C
        Resistance to Ethylene glycol/waterFail50% Conc. at 120°C
        Resistance to Formaldehyde, aqueousPass10% Conc. at 23°C
        Resistance to Formic acidFail2% Conc. at 23°C
        Resistance to GlycerinPass100% Conc. at 23°C
        Resistance to Hydraulic oil H and HL (DIN 51524)Pass100% Conc. at 100°C
        Resistance to Hydrogen chloride, gasFail100% Conc. at 23°C
        Resistance to Iso-octanolPass100% Conc. at 23°C
        Resistance to IsopropanolPass100% Conc. at 23°C
        Resistance to MethanolPass100% Conc. at 23°C
        Resistance to Methylene chlorideFail100% Conc. at 23°C
        Resistance to Motor oil (SAE 10W-40)Pass100% Conc. at 130°C
         Pass100% Conc. at 23°C
        Resistance to Natural GasPass100% Conc. at 23°C
        Resistance to Nitric acidFail40% Conc. at 23°C
        Resistance to OzoneFail100% Conc. at 23°C
        Resistance to PhenolFail100% Conc. at 23°C
        Resistance to Phosphoric acidFail30% Conc. at 23°C
        Resistance to Potassium chloride, aqueousPass10% Conc. at 23°C
        Resistance to Potassium permanganate, aqueousFail10% Conc. at 23°C
        Resistance to Sodium chloride, aqueousPass10% Conc. at 23°C
        Resistance to Sodium hydroxide solution, aqueousPass1% Conc. at 23°C
        Resistance to Sodium hypochlorite, aqueousFail10% Conc. at 23°C
        Resistance to Transmission oil (ATF m 1375.4)Pass100% Conc. at 150°C
        Resistance to Urea, aqueousPass20% Conc. at 23°C
        Resistant to Carbon disulphidePass100% Conc. at 23°C
        Resistant to Carbon tetrachloridePass100% Conc. at 23°C
        Resistant to Citric acidPass10% Conc. at 23°C
        Resistant to Ethyl acetatePass100% Conc. at 23°C
        Resistant to Hydrochloric acidFail36% Conc. at 23°C
        Resistant to Hydrogen peroxideFail23°C
        Resistant to SeawaterPass100% Conc. at 23°C
        Resistant to Silicone fluidPass23°C
        Resistant to Sulphuric acidFail96% Conc. at 23°C
        Resistant to Super-grade petrol (DIN 51600)Pass100% Conc. at 23°C
        Resistant to ToluolPass100% Conc. at 23°C
        Resistant to WaterPass100% Conc. up to 50°C
        Resistant to XylolPass100% Conc. at 23°C
        Resistant to Zinc chloride, aqueousFail50% Conc. at 23°C
        
  
  

  

  
        
                        
        
                        
                    
        
                
        





                

                
        
                    
        轉載請注明: 轉自中國塑膠原料之家 http://www.spnmy.cn/wuxingbiao/
        
                    
        本文鏈接: http://www.spnmy.cn/yuanliaoku/show-44844.html  
        
                    
        免責聲明: 本文 Akro-Plastic Akromid? A3 GF 50 (2423) PA 6.6 Dry, 50% Glass Filled 僅代表作者個人觀點，中國塑膠原料之家無關。中國塑膠原料之家網所轉載的內容，其版權均由原作者和資料提供方所擁有！如因作品版權問題需要處理，請與我們聯絡  
        
                
        

                




            
        
        
        
    
        



    
        
        
        
            
        
                
        
                    
        
                        塑膠原料之家，專業塑料網站、原料報價網站，免費發布塑膠供求信息。塑膠原料之家為您提供塑料供應、塑料求購、塑料行情、塑料展會、塑料原料資訊服務。
                    
        
                    
        
                        2008-2015 塑料|塑膠原料|物性表大全|UL黃卡|SGS報告查詢|最新價格--塑膠原料之家
                    
        
                    
        
                      滬ICP備15027283號-4
                    
        
                
        

            
        
        
        
    
        

    
    
    




主站蜘蛛池模板：
a级毛片在线免费观看|
亚洲 欧洲 自拍 另类 校园|
国产成人久久蜜一区二区|
日韩高清亚洲日韩精品一区二区
|
久热视频这里只有精品6|
啦啦啦高清在线观看视频www|
婷婷综合在线观看丁香|
国产亚洲精品AA片在线爽|
少妇中文字幕乱码亚洲影视|
久久亚洲精品11p|
小姑娘完整中文在线观看|
成人国产亚洲精品天堂av|
午夜福利影院不卡影院|
深夜福利啪啪片|
国产精品先锋资源站先锋影院
|
91精品91久久久久久|
国产亚洲精品国产福APP
|
无码高潮爽到爆的喷水视频app|
青草视频在线观看综合|
久久一级黄色大片免费观看|
色欲AV无码一区二区人妻|
欧美日本一区二区视频在线观看|
日韩精品区一区二区三vr|
久久香蕉国产线看观看亚洲片|
毛片无遮挡高清免费|
女人把腿张开男人来桶|
久久中文字幕一区二区|
五月天福利视频|
精品无码国产日韩制服丝袜|
а天堂8中文最新版在线官网|
亚洲国产激情一区二区三区|
亚洲av午夜福利精品一区二区|
97一区二区国产好的精华液|
国产高清不卡视频|
国产不卡一区在线视频|
亚洲国产成人精品av区按摩|
国产精品 欧美 亚洲 制服|
免费看又黄又无码的网站|
精选国产av精选一区二区三区|
亚洲成人午夜排名成人午夜|
无码人妻斩一区二区三区
|