- 密度 [g/cm3]: 1.14
- 吸水率 [%]: 0.7
- 缺口沖擊強度: 0.374
- 斷裂伸長率 [%]: 103
- 彎曲強度 [MPa]: 68.9
- 彎曲模量 [MPa]: 4.48
- 熱變形溫度 [℃]: 243.0
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.14 - 1.38 g/cc | 0.0412 - 0.0497 lb/in3 | Average value: 1.25 g/cc Grade Count:10 |
| Filler Content | 5.00 - 25.0 % | 5.00 - 25.0 % | Average value: 14.4 % Grade Count:9 |
| Water Absorption | 0.700 - 1.50 % | 0.700 - 1.50 % | Average value: 1.16 % Grade Count:9 |
| Linear Mold Shrinkage | 0.00100 - 0.00800 cm/cm | 0.00100 - 0.00800 in/in | Average value: 0.00323 cm/cm Grade Count:10 |
| Mechanical Properties | Metric | English | Comments |
| Tensile Strength, Ultimate | 68.9 - 207 MPa | 10000 - 30000 psi | Average value: 116 MPa Grade Count:10 |
| Elongation at Break | 0.500 - 5.00 % | 0.500 - 5.00 % | Average value: 2.03 % Grade Count:10 |
| Modulus of Elasticity | 5.17 - 13.1 GPa | 750 - 1900 ksi | Average value: 8.41 GPa Grade Count:10 |
| Flexural Yield Strength | 103 - 324 MPa | 15000 - 47000 psi | Average value: 172 MPa Grade Count:10 |
| Flexural Modulus | 4.48 - 12.4 GPa | 650 - 1800 ksi | Average value: 7.74 GPa Grade Count:10 |
| Izod Impact, Notched | 0.374 - 2.14 J/cm | 0.700 - 4.01 ft-lb/in | Average value: 0.780 J/cm Grade Count:10 |
| Izod Impact, Unnotched | 3.20 - 5.34 J/cm | 6.00 - 10.0 ft-lb/in | Average value: 3.74 J/cm Grade Count:9 |
| Electrical Properties | Metric | English | Comments |
| Electrical Resistivity | 1.00 - 100 ohm-cm | 1.00 - 100 ohm-cm | Average value: 14.1 ohm-cm Grade Count:10 |
| Surface Resistance | 1.00 - 1.00e+6 ohm | 1.00 - 1.00e+6 ohm | Average value: 115000 ohm Grade Count:10 |
| Static Decay | 2.00 sec | 2.00 sec | Average value: 2.00 sec Grade Count:7 |
| Thermal Properties | Metric | English | Comments |
| Deflection Temperature at 0.46 MPa (66 psi) | 243 - 266 °C | 470 - 510 °F | Average value: 251 °C Grade Count:6 |
| Deflection Temperature at 1.8 MPa (264 psi) | 232 - 260 °C | 450 - 500 °F | Average value: 243 °C Grade Count:7 |
| Flammability, UL94 | HB - V-0 | HB - V-0 | Grade Count:7 |
| Processing Properties | Metric | English | Comments |
| Processing Temperature | 266 - 293 °C | 510 - 560 °F | Average value: 280 °C Grade Count:9 |
| Mold Temperature | 65.6 - 107 °C | 150 - 225 °F | Average value: 89.4 °C Grade Count:10 |
| Injection Pressure | 68.9 - 124 MPa | 10000 - 18000 psi | Average value: 94.2 MPa Grade Count:9 |