ww污污污网站在线看com,亚洲精品中文字幕尤物综合,麻豆精产国品一二三产,少妇爽到呻吟的视频,18禁无遮挡啪啪无码网站

DSM Stanyl? TW200F6 Nylon 46-30% Glass Reinforced (European Grade) (Cond)

DSM Stanyl? TW200F6 Nylon 46-30% Glass Reinforced (European Grade) (Cond) 物性表: DSM Stanyl? TW200F6 Nylon 46-30% Glass Reinforced (European Grade) (Cond)物性表及特性介紹,DSM Stanyl? TW200F6 Nylon 46-30% Glass Reinforced (European Grade) (Cond)注塑參數詳情,如需DSM Stanyl? TW200F6 Nylon 46-30% Glass Reinforced (European Grade) (Cond)下載, 可到相關下載區下載

密度 [g/cm3]: 1.41
吸水率 [%]: 9.5

Physical Properties	Metric	English	Comments

Density	1.41 g/cc	0.0509 lb/in3	(DAM); ISO 1183
Water Absorption	9.5 %	9.5 %	DAM; Sim. to ISO 62
Moisture Absorption at Equilibrium	2.6 %	2.6 %	Humidity Absorption (DAM); Sim. to ISO 62
Linear Mold Shrinkage, Flow	0.0050 cm/cm	0.0050 in/in	DAM; ISO 294-4
	0.013 cm/cm	0.013 in/in	DAM; ISO 294-4

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	115 MPa	16700 psi	ISO 527-1/-2
Elongation at Break	7.0 %	7.0 %	ISO 527-1/-2
Tensile Modulus	6.00 GPa	870 ksi	ISO 527-1/-2
Charpy Impact Unnotched	7.00 J/cm2 @Temperature -30.0 °C	33.3 ft-lb/in2 @Temperature -22.0 °F	ISO 179/1eU
	9.00 J/cm2 @Temperature 23.0 °C	42.8 ft-lb/in2 @Temperature 73.4 °F	ISO 179/1eU
Charpy Impact, Notched	1.00 J/cm2 @Temperature -30.0 °C	4.76 ft-lb/in2 @Temperature -22.0 °F	ISO 179/1eA
	1.90 J/cm2 @Temperature 23.0 °C	9.04 ft-lb/in2 @Temperature 73.4 °F	ISO 179/1eA
Tensile Creep Modulus, 1000 hours	4500 MPa	653000 psi	ISO 899-1

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+9 ohm-cm	1.00e+9 ohm-cm	IEC 60093
Surface Resistance	1.00e+13 ohm	1.00e+13 ohm	IEC 60093
Dielectric Constant	4.7 @Frequency 1e+6 Hz	4.7 @Frequency 1e+6 Hz	IEC 60250
	16 @Frequency 100 Hz	16 @Frequency 100 Hz	IEC 60250
Dielectric Strength	20.0 kV/mm	508 kV/in	IEC 60243-1
Dissipation Factor	0.010 @Frequency 1e+6 Hz	0.010 @Frequency 1e+6 Hz	IEC 60250
	0.060 @Frequency 100 Hz	0.060 @Frequency 100 Hz	IEC 60250
Comparative Tracking Index	300 V	300 V	IEC 60112

Thermal Properties	Metric	English	Comments
Melting Point	295 °C	563 °F	10°C/min (DAM); ISO 11357-1/-3

Descriptive Properties
Heat Stabilized or Stable to Heat	Yes
Injection Molding	Yes
Platable	Yes
With Fillers	Yes

關鍵詞:
PA46
供應
DSM Stanyl? TW200F6 Nylon 46-30% Glass Reinforced (European Grade) (Cond)

轉載請注明: 轉自中國塑膠原料之家 http://www.spnmy.cn/wuxingbiao/

本文鏈接: http://www.spnmy.cn/yuanliaoku/show-44634.html

免責聲明: 本文 DSM Stanyl? TW200F6 Nylon 46-30% Glass Reinforced (European Grade) (Cond) 僅代表作者個人觀點，中國塑膠原料之家無關。中國塑膠原料之家網所轉載的內容，其版權均由原作者和資料提供方所擁有！如因作品版權問題需要處理，請與我們聯絡