- 密度 [g/cm3]: 1.58
- 吸水率 [%]: 4.3
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Density | 1.58 g/cc | 0.0571 lb/in3 | ISO 1183 | ||
| Water Absorption | 4.3 % | 4.3 % | ISO 62 | ||
| Moisture Absorption | 1.70 % | 1.70 % | ISO 62 | ||
| Linear Mold Shrinkage, Flow | 0.0010 cm/cm | 0.0010 in/in | ISO 294-4, 2577 | ||
| Linear Mold Shrinkage, Transverse | 0.0080 cm/cm | 0.0080 in/in | ISO 294-4, 2577 | ||
| Mechanical Properties | Metric | English | Comments | ||
| Ball Indentation Hardness | 250 MPa | 36300 psi | conditioned; ISO 2039-1 | ||
| 270 MPa | 39200 psi | dry; ISO 2039-1 | |||
| Tensile Strength at Break | 165 MPa | 23900 psi | conditioned; ISO 527-1/-2 | ||
| 230 MPa | 33400 psi | dry; ISO 527-1/-2 | |||
| Elongation at Break | 2.7 % | 2.7 % | dry; ISO 527-1/-2 | ||
| 2.7 % | 2.7 % | conditioned; ISO 527-1/-2 | |||
| Tensile Modulus | 13.0 GPa | 1890 ksi | conditioned; ISO 527-1/-2 | ||
| 15.0 GPa | 2180 ksi | dry; ISO 527-1/-2 | |||
| Charpy Impact Unnotched | 7.00 J/cm2 | 33.3 ft-lb/in2 | dry; ISO 179/1eU | ||
| 8.00 J/cm2 | 38.1 ft-lb/in2 | conditioned; ISO 179/1eU | |||
| 6.00 J/cm2 @Temperature 30.0 °C | 28.6 ft-lb/in2 @Temperature 86.0 °F | dry; ISO 179/1eU | |||
| 6.00 J/cm2 @Temperature 30.0 °C | 28.6 ft-lb/in2 @Temperature 86.0 °F | conditioned; ISO 179/1eU | |||
| Charpy Impact, Notched | 1.10 J/cm2 | 5.23 ft-lb/in2 | dry; ISO 179/1eA | ||
| 1.10 J/cm2 | 5.23 ft-lb/in2 | conditioned; ISO 179/1eA | |||
| 0.900 J/cm2 @Temperature 30.0 °C | 4.28 ft-lb/in2 @Temperature 86.0 °F | dry; ISO 179/1eU | |||
| 0.900 J/cm2 @Temperature 30.0 °C | 4.28 ft-lb/in2 @Temperature 86.0 °F | conditioned; ISO 179/1eU | |||
| Electrical Properties | Metric | English | Comments | ||
| Volume Resistivity | 1.00e+12 ohm-cm | 1.00e+12 ohm-cm | dry; IEC 60093 | ||
| 1.00e+12 ohm-cm | 1.00e+12 ohm-cm | conditioned; IEC 60093 | |||
| Surface Resistance | 1.00e+12 ohm | 1.00e+12 ohm | IEC 60093 | ||
| Dielectric Strength | 45.0 kV/mm | 1140 kV/in | dry; IEC 60243-1 | ||
| 45.0 kV/mm | 1140 kV/in | conditioned; IEC 60243-1 | |||
| Comparative Tracking Index | 600 V | 600 V | conditioned; IEC 60112 | ||
| Thermal Properties | Metric | English | Comments | ||
| CTE, linear, Parallel to Flow | 20.0 μm/m-°C | 11.1 μin/in-°F | ISO 11359-1/-2 | ||
| CTE, linear, Transverse to Flow | 70.0 μm/m-°C | 38.9 μin/in-°F | ISO 11359-1/-2 | ||
| Melting Point | 300 °C | 572 °F | 10°C/min; ISO 11357-1/-3 | ||
| Maximum Service Temperature, Air | 150 °C | 302 °F | long term; EMS | ||
| 250 °C | 482 °F | short term; EMS | |||
| Deflection Temperature at 1.8 MPa (264 psi) | 240 °C | 464 °F | ISO 75-1/-2 | ||
| Deflection Temperature at 8.0 MPa | 170 °C | 338 °F | ISO 75-1/-2 | ||
| Flammability, UL94 | HB | HB | IEC 60695-11-10 | ||
| Descriptive Properties | |||||
| Automotive | Air intake sytems | ||||
| Fuel systems | |||||
| Hydraulic systems | |||||
| Interior | |||||
| Powertrain and Chassis | |||||
| Electricals & Electronics | Electrical equipment | ||||
| Form | Granules | ||||
| Industry & Consumer goods | Hydraulics & Pneumatics | ||||
| Mechanical Engineering | |||||
| Power transmission | |||||
| Tools & Accessories | |||||
| Processing | Injection Molding | ||||
| Product Attributes | Bio based Polyamide | ||||
| Co Polyamide | |||||
| Improved alcohol resistance | |||||
| Partially aromatic Polyamide | |||||
| Special Characteristics | Improved heat resistance | ||||