- 密度 [g/cm3]: 1.29
- 吸水率 [%]: 6.0
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Density | 1.29 g/cc | 0.0466 lb/in3 | ISO 1183 | ||
| Water Absorption | 6.0 % | 6.0 % | ISO 62 | ||
| Moisture Absorption | 2.00 % | 2.00 % | ISO 62 | ||
| Linear Mold Shrinkage, Flow | 0.0050 cm/cm | 0.0050 in/in | ISO 294-4, 2577 | ||
| Linear Mold Shrinkage, Transverse | 0.010 cm/cm | 0.010 in/in | ISO 294-4, 2577 | ||
| Mechanical Properties | Metric | English | Comments | ||
| Hardness, Shore D | 87 | 87 | conditioned, 15s; ISO 868 | ||
| 88 | 88 | dry, 15s; ISO 868 | |||
| Ball Indentation Hardness | 175 MPa | 25400 psi | conditioned; ISO 2039-1 | ||
| 210 MPa | 30500 psi | dry; ISO 2039-1 | |||
| Tensile Strength at Break | 115 MPa | 16700 psi | dry; ISO 527-1/-2 | ||
| 115 MPa | 16700 psi | conditioned; ISO 527-1/-2 | |||
| Elongation at Break | 2.0 % | 2.0 % | dry; ISO 527-1/-2 | ||
| 2.0 % | 2.0 % | conditioned; ISO 527-1/-2 | |||
| Tensile Modulus | 7.00 GPa | 1020 ksi | conditioned; ISO 527-1/-2 | ||
| 7.00 GPa | 1020 ksi | dry; ISO 527-1/-2 | |||
| Charpy Impact Unnotched | 2.50 J/cm2 | 11.9 ft-lb/in2 | dry; ISO 179/1eU | ||
| 2.50 J/cm2 | 11.9 ft-lb/in2 | conditioned; ISO 179/1eU | |||
| 2.50 J/cm2 @Temperature 30.0 °C | 11.9 ft-lb/in2 @Temperature 86.0 °F | dry; ISO 179/1eU | |||
| 2.50 J/cm2 @Temperature 30.0 °C | 11.9 ft-lb/in2 @Temperature 86.0 °F | conditioned; ISO 179/1eU | |||
| Charpy Impact, Notched | 0.500 J/cm2 | 2.38 ft-lb/in2 | dry; ISO 179/1eA | ||
| 0.500 J/cm2 | 2.38 ft-lb/in2 | conditioned; ISO 179/1eA | |||
| 0.500 J/cm2 @Temperature 30.0 °C | 2.38 ft-lb/in2 @Temperature 86.0 °F | dry; ISO 179/1eU | |||
| 0.500 J/cm2 @Temperature 30.0 °C | 2.38 ft-lb/in2 @Temperature 86.0 °F | conditioned; ISO 179/1eU | |||
| Electrical Properties | Metric | English | Comments | ||
| Volume Resistivity | 1.00e+12 ohm-cm | 1.00e+12 ohm-cm | dry; IEC 60093 | ||
| 1.00e+12 ohm-cm | 1.00e+12 ohm-cm | conditioned; IEC 60093 | |||
| Surface Resistance | 1.00e+12 ohm | 1.00e+12 ohm | IEC 60093 | ||
| Dielectric Strength | 38.0 kV/mm | 965 kV/in | dry; IEC 60243-1 | ||
| 38.0 kV/mm | 965 kV/in | conditioned; IEC 60243-1 | |||
| Comparative Tracking Index | 500 V | 500 V | conditioned; IEC 60112 | ||
| Thermal Properties | Metric | English | Comments | ||
| CTE, linear, Parallel to Flow | 30.0 μm/m-°C | 16.7 μin/in-°F | ISO 11359-1/-2 | ||
| CTE, linear, Transverse to Flow | 75.0 μm/m-°C | 41.7 μin/in-°F | ISO 11359-1/-2 | ||
| Melting Point | 310 °C | 590 °F | 10°C/min; ISO 11357-1/-3 | ||
| Maximum Service Temperature, Air | 140 °C | 284 °F | long term; EMS | ||
| 240 °C | 464 °F | short term; EMS | |||
| Deflection Temperature at 1.8 MPa (264 psi) | 270 °C | 518 °F | ISO 75-1/-2 | ||
| Deflection Temperature at 8.0 MPa | 100 °C | 212 °F | ISO 75-1/-2 | ||
| Flammability, UL94 | HB | HB | IEC 60695-11-10 | ||
| Descriptive Properties | |||||
| Automotive | Exterior | ||||
| Fuel systems | |||||
| Interior | |||||
| Powertrain and Chassis | |||||
| Electricals & Electronics | Connectors | ||||
| Form | Granules | ||||
| Industry & Consumer goods | Housewares | ||||
| Hydraulics & Pneumatics | |||||
| Mechanical Engineering | |||||
| Power transmission | |||||
| Sports & Leisure | |||||
| Tools & Accessories | |||||
| Processing | Injection Molding | ||||
| Special Characteristics | Improved heat resistance | ||||
| Improved UV resistance (outdoor use) | |||||