- 密度 [g/cm3]: 1.72
- 吸水率 [%]: 5.0
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Density | 1.72 g/cc | 0.0621 lb/in3 | ISO 1183 | ||
| Water Absorption | 5.0 % | 5.0 % | ISO 62 | ||
| Moisture Absorption | 1.10 % | 1.10 % | ISO 62 | ||
| Linear Mold Shrinkage, Flow | 0.0010 cm/cm | 0.0010 in/in | ISO 294-4, 2577 | ||
| Linear Mold Shrinkage, Transverse | 0.0030 cm/cm | 0.0030 in/in | ISO 294-4, 2577 | ||
| Mechanical Properties | Metric | English | Comments | ||
| Tensile Strength at Break | 155 MPa | 22500 psi | conditioned; ISO 527-1/-2 | ||
| 220 MPa | 31900 psi | dry; ISO 527-1/-2 | |||
| Elongation at Break | 2.0 % | 2.0 % | dry; ISO 527-1/-2 | ||
| 2.5 % | 2.5 % | conditioned; ISO 527-1/-2 | |||
| Tensile Modulus | 13.5 GPa | 1960 ksi | conditioned; ISO 527-1/-2 | ||
| 20.0 GPa | 2900 ksi | dry; ISO 527-1/-2 | |||
| Charpy Impact Unnotched | 9.00 J/cm2 | 42.8 ft-lb/in2 | conditioned; ISO 179/1eU | ||
| 10.0 J/cm2 | 47.6 ft-lb/in2 | dry; ISO 179/1eU | |||
| 8.00 J/cm2 @Temperature 30.0 °C | 38.1 ft-lb/in2 @Temperature 86.0 °F | dry; ISO 179/1eU | |||
| 8.00 J/cm2 @Temperature 30.0 °C | 38.1 ft-lb/in2 @Temperature 86.0 °F | conditioned; ISO 179/1eU | |||
| Charpy Impact, Notched | 1.50 J/cm2 | 7.14 ft-lb/in2 | dry; ISO 179/1eA | ||
| 2.00 J/cm2 | 9.52 ft-lb/in2 | conditioned; ISO 179/1eA | |||
| 1.20 J/cm2 @Temperature 30.0 °C | 5.71 ft-lb/in2 @Temperature 86.0 °F | dry; ISO 179/1eU | |||
| 1.20 J/cm2 @Temperature 30.0 °C | 5.71 ft-lb/in2 @Temperature 86.0 °F | conditioned; ISO 179/1eU | |||
| Thermal Properties | Metric | English | Comments | ||
| Melting Point | 265 °C | 509 °F | 10°C/min; ISO 11357-1/-3 | ||
| Maximum Service Temperature, Air | 100 - 130 °C | 212 - 266 °F | long term; EMS | ||
| 200 °C | 392 °F | short term; EMS | |||
| Deflection Temperature at 1.8 MPa (264 psi) | 230 °C | 446 °F | ISO 75-1/-2 | ||
| Deflection Temperature at 8.0 MPa | 195 °C | 383 °F | ISO 75-1/-2 | ||
| Flammability, UL94 | HB | HB | IEC 60695-11-10 | ||
| Descriptive Properties | |||||
| Automotive | Air intake sytems | ||||
| Powertrain and Chassis | |||||
| Electricals & Electronics | Electrical appliances | ||||
| Electrical equipment | |||||
| Form | Granules | ||||
| Industry & Consumer goods | Housewares | ||||
| Mechanical Engineering | |||||
| Sports & Leisure | |||||
| Tools & Accessories | |||||
| Processing | Injection Molding | ||||