- 密度 [g/cm3]: 1.55
- 吸水率 [%]: 5.0
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Density | 1.55 g/cc | 0.0560 lb/in3 | ISO 1183 | ||
| Water Absorption | 5.0 % | 5.0 % | ISO 62 | ||
| Moisture Absorption | 1.50 % | 1.50 % | ISO 62 | ||
| Linear Mold Shrinkage, Flow | 0.0010 cm/cm | 0.0010 in/in | ISO 294-4, 2577 | ||
| Linear Mold Shrinkage, Transverse | 0.0030 cm/cm | 0.0030 in/in | ISO 294-4, 2577 | ||
| Mechanical Properties | Metric | English | Comments | ||
| Ball Indentation Hardness | 150 MPa | 21800 psi | conditioned; ISO 2039-1 | ||
| 270 MPa | 39200 psi | dry; ISO 2039-1 | |||
| Tensile Strength at Break | 150 MPa | 21800 psi | conditioned; ISO 527-1/-2 | ||
| 230 MPa | 33400 psi | dry; ISO 527-1/-2 | |||
| Elongation at Break | 2.5 % | 2.5 % | dry; ISO 527-1/-2 | ||
| 5.0 % | 5.0 % | conditioned; ISO 527-1/-2 | |||
| Tensile Modulus | 12.0 GPa | 1740 ksi | conditioned; ISO 527-1/-2 | ||
| 16.5 GPa | 2390 ksi | dry; ISO 527-1/-2 | |||
| Charpy Impact Unnotched | 9.00 J/cm2 | 42.8 ft-lb/in2 | dry; ISO 179/1eU | ||
| 10.0 J/cm2 | 47.6 ft-lb/in2 | conditioned; ISO 179/1eU | |||
| 8.00 J/cm2 @Temperature 30.0 °C | 38.1 ft-lb/in2 @Temperature 86.0 °F | conditioned; ISO 179/1eU | |||
| 9.00 J/cm2 @Temperature 30.0 °C | 42.8 ft-lb/in2 @Temperature 86.0 °F | dry; ISO 179/1eU | |||
| Charpy Impact, Notched | 1.40 J/cm2 | 6.66 ft-lb/in2 | dry; ISO 179/1eA | ||
| 1.80 J/cm2 | 8.57 ft-lb/in2 | conditioned; ISO 179/1eA | |||
| 1.20 J/cm2 @Temperature 30.0 °C | 5.71 ft-lb/in2 @Temperature 86.0 °F | conditioned; ISO 179/1eU | |||
| 1.30 J/cm2 @Temperature 30.0 °C | 6.19 ft-lb/in2 @Temperature 86.0 °F | dry; ISO 179/1eU | |||
| Electrical Properties | Metric | English | Comments | ||
| Volume Resistivity | 1.00e+13 ohm-cm | 1.00e+13 ohm-cm | conditioned; IEC 60093 | ||
| 1.00e+14 ohm-cm | 1.00e+14 ohm-cm | dry; IEC 60093 | |||
| Surface Resistance | 1.00e+12 ohm | 1.00e+12 ohm | IEC 60093 | ||
| Dielectric Strength | 22.0 kV/mm | 559 kV/in | conditioned; IEC 60243-1 | ||
| 27.0 kV/mm | 686 kV/in | dry; IEC 60243-1 | |||
| Comparative Tracking Index | 525 V | 525 V | conditioned; IEC 60112 | ||
| Thermal Properties | Metric | English | Comments | ||
| CTE, linear, Parallel to Flow | 15.0 μm/m-°C | 8.33 μin/in-°F | ISO 11359-1/-2 | ||
| CTE, linear, Transverse to Flow | 90.0 μm/m-°C | 50.0 μin/in-°F | ISO 11359-1/-2 | ||
| Melting Point | 260 °C | 500 °F | 10°C/min; ISO 11357-1/-3 | ||
| Maximum Service Temperature, Air | 130 - 150 °C | 266 - 302 °F | long term; EMS | ||
| 230 °C | 446 °F | short term; EMS | |||
| Deflection Temperature at 1.8 MPa (264 psi) | 250 °C | 482 °F | ISO 75-1/-2 | ||
| Deflection Temperature at 8.0 MPa | 215 °C | 419 °F | ISO 75-1/-2 | ||
| Flammability, UL94 | HB | HB | IEC 60695-11-10 | ||
| Descriptive Properties | |||||
| Automotive | Air intake sytems | ||||
| Automotive electr. and electronics, lighting | |||||
| Cooling and climate control | |||||
| Hydraulic systems | |||||
| Electricals & Electronics | Lighting | ||||
| Form | Granules | ||||
| Industry & Consumer goods | Heating systems | ||||
| Hydraulics & Pneumatics | |||||
| Mechanical Engineering | |||||
| Sports & Leisure | |||||
| Processing | Injection Molding | ||||
| Special Characteristics | Improved heat resistance | ||||