- 密度 [g/cm3]: 1.55
- 吸水率 [%]: 4.5
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Density | 1.55 g/cc | 0.0560 lb/in3 | ISO 1183 | ||
| Water Absorption | 4.5 % | 4.5 % | ISO 62 | ||
| Moisture Absorption | 1.50 % | 1.50 % | ISO 62 | ||
| Linear Mold Shrinkage, Flow | 0.0010 cm/cm | 0.0010 in/in | ISO 294-4, 2577 | ||
| Linear Mold Shrinkage, Transverse | 0.0030 cm/cm | 0.0030 in/in | ISO 294-4, 2577 | ||
| Mechanical Properties | Metric | English | Comments | ||
| Ball Indentation Hardness | 200 MPa | 29000 psi | conditioned; ISO 2039-1 | ||
| 310 MPa | 45000 psi | dry; ISO 2039-1 | |||
| Tensile Strength at Break | 185 MPa | 26800 psi | conditioned; ISO 527-1/-2 | ||
| 265 MPa | 38400 psi | dry; ISO 527-1/-2 | |||
| Elongation at Break | 2.3 % | 2.3 % | dry; ISO 527-1/-2 | ||
| 2.6 % | 2.6 % | conditioned; ISO 527-1/-2 | |||
| Tensile Modulus | 12.5 GPa | 1810 ksi | conditioned; ISO 527-1/-2 | ||
| 17.4 GPa | 2520 ksi | dry; ISO 527-1/-2 | |||
| Charpy Impact Unnotched | 10.0 J/cm2 | 47.6 ft-lb/in2 | dry; ISO 179/1eU | ||
| 10.5 J/cm2 | 50.0 ft-lb/in2 | conditioned; ISO 179/1eU | |||
| 7.50 J/cm2 @Temperature 30.0 °C | 35.7 ft-lb/in2 @Temperature 86.0 °F | conditioned; ISO 179/1eU | |||
| 9.50 J/cm2 @Temperature 30.0 °C | 45.2 ft-lb/in2 @Temperature 86.0 °F | dry; ISO 179/1eU | |||
| Charpy Impact, Notched | 4.00 J/cm2 | 19.0 ft-lb/in2 | dry; ISO 179/1eA | ||
| 4.50 J/cm2 | 21.4 ft-lb/in2 | conditioned; ISO 179/1eA | |||
| 4.00 J/cm2 @Temperature 30.0 °C | 19.0 ft-lb/in2 @Temperature 86.0 °F | dry; ISO 179/1eU | |||
| 4.50 J/cm2 @Temperature 30.0 °C | 21.4 ft-lb/in2 @Temperature 86.0 °F | conditioned; ISO 179/1eU | |||
| Electrical Properties | Metric | English | Comments | ||
| Volume Resistivity | 1.00e+12 ohm-cm | 1.00e+12 ohm-cm | conditioned; IEC 60093 | ||
| 1.00e+13 ohm-cm | 1.00e+13 ohm-cm | dry; IEC 60093 | |||
| Surface Resistance | 1.00e+12 ohm | 1.00e+12 ohm | IEC 60093 | ||
| Dielectric Strength | 22.0 kV/mm | 559 kV/in | conditioned; IEC 60243-1 | ||
| 27.0 kV/mm | 686 kV/in | dry; IEC 60243-1 | |||
| Comparative Tracking Index | 600 V | 600 V | conditioned; IEC 60112 | ||
| Thermal Properties | Metric | English | Comments | ||
| CTE, linear, Parallel to Flow | 20.0 μm/m-°C | 11.1 μin/in-°F | ISO 11359-1/-2 | ||
| CTE, linear, Transverse to Flow | 50.0 μm/m-°C | 27.8 μin/in-°F | ISO 11359-1/-2 | ||
| Melting Point | 260 °C | 500 °F | 10°C/min; ISO 11357-1/-3 | ||
| Maximum Service Temperature, Air | 120 - 130 °C | 248 - 266 °F | long term; EMS | ||
| 220 °C | 428 °F | short term; EMS | |||
| Deflection Temperature at 1.8 MPa (264 psi) | 250 °C | 482 °F | ISO 75-1/-2 | ||
| Deflection Temperature at 8.0 MPa | 230 °C | 446 °F | ISO 75-1/-2 | ||
| Flammability, UL94 | HB | HB | IEC 60695-11-10 | ||
| Descriptive Properties | |||||
| Automotive | Automotive electr. and electronics, lighting | ||||
| Cooling and climate control | |||||
| Exterior | |||||
| Interior | |||||
| Powertrain and Chassis | |||||
| Electricals & Electronics | Connectors | ||||
| Electrical appliances | |||||
| Electrical equipment | |||||
| Energy distribution | |||||
| Form | Granules | ||||
| Industry & Consumer goods | Housewares | ||||
| Hydraulics & Pneumatics | |||||
| Mechanical Engineering | |||||
| Power transmission | |||||
| Sports & Leisure | |||||
| Tools & Accessories | |||||
| Processing | Injection Molding | ||||
| Product Attributes | Long Fiber Reinforced | ||||
| Special Characteristics | Improved heat resistance | ||||