- 密度 [g/cm3]: 1.3
- 吸水率 [%]: 6.0
- 拉伸強度 [MPa]: 90.0
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Density | 1.30 g/cc | 0.0470 lb/in3 | ISO 1183 | ||
| Water Absorption | 6.0 % | 6.0 % | ISO 62 | ||
| Moisture Absorption | 2.50 % | 2.50 % | ISO 62 | ||
| Linear Mold Shrinkage, Flow | 0.0020 cm/cm | 0.0020 in/in | ISO 294-4, 2577 | ||
| Linear Mold Shrinkage, Transverse | 0.0070 cm/cm | 0.0070 in/in | ISO 294-4, 2577 | ||
| Mechanical Properties | Metric | English | Comments | ||
| Tensile Strength at Break | 90.0 MPa | 13100 psi | conditioned; ISO 527-1/-2 | ||
| 165 MPa | 23900 psi | dry; ISO 527-1/-2 | |||
| Tensile Strength, Yield | 90.0 MPa | 13100 psi | conditioned; ISO 527-1/-2 | ||
| Elongation at Break | 4.0 % | 4.0 % | dry; ISO 527-1/-2 | ||
| 6.0 % | 6.0 % | conditioned; ISO 527-1/-2 | |||
| Elongation at Yield | 4.0 % | 4.0 % | conditioned; ISO 527-1/-2 | ||
| Tensile Modulus | 5.60 GPa | 812 ksi | conditioned; ISO 527-1/-2 | ||
| 7.70 GPa | 1120 ksi | dry; ISO 527-1/-2 | |||
| Charpy Impact Unnotched | 6.00 J/cm2 | 28.6 ft-lb/in2 | dry; ISO 179/1eU | ||
| 7.00 J/cm2 | 33.3 ft-lb/in2 | conditioned; ISO 179/1eU | |||
| 5.00 J/cm2 @Temperature 30.0 °C | 23.8 ft-lb/in2 @Temperature 86.0 °F | dry; ISO 179/1eU | |||
| 5.00 J/cm2 @Temperature 30.0 °C | 23.8 ft-lb/in2 @Temperature 86.0 °F | conditioned; ISO 179/1eU | |||
| Thermal Properties | Metric | English | Comments | ||
| CTE, linear, Parallel to Flow | 25.0 μm/m-°C | 13.9 μin/in-°F | ISO 11359-1/-2 | ||
| CTE, linear, Transverse to Flow | 80.0 μm/m-°C | 44.4 μin/in-°F | ISO 11359-1/-2 | ||
| Melting Point | 260 °C | 500 °F | 10°C/min; ISO 11357-1/-3 | ||
| Maximum Service Temperature, Air | 90.0 - 110 °C | 194 - 230 °F | long term; EMS | ||
| 180 °C | 356 °F | short term; EMS | |||
| Deflection Temperature at 1.8 MPa (264 psi) | 225 °C | 437 °F | ISO 75-1/-2 | ||
| Flammability, UL94 | HB | HB | IEC 60695-11-10 | ||
| Descriptive Properties | |||||
| Automotive | Air intake sytems | ||||
| Powertrain and Chassis | |||||
| Electricals & Electronics | Electrical appliances | ||||
| Electrical equipment | |||||
| Form | Granules | ||||
| Industry & Consumer goods | Housewares | ||||
| Mechanical Engineering | |||||
| Sports & Leisure | |||||
| Tools & Accessories | |||||
| Processing | Injection Molding | ||||