- 密度 [g/cm3]: 2.32
- 吸水率 [%]: 1.5
- 斷裂伸長率 [%]: 13.0
- 硬度: 55.0
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 2.32 g/cc | 0.0838 lb/in3 | ISO 1183-1 |
| Moisture Absorption at Equilibrium | <= 0.10 % | <= 0.10 % | 50% RH |
| Water Absorption at Saturation | 1.5 - 2.5 % | 1.5 - 2.5 % | |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Rockwell R | 55 | 55 | ISO 2039-2 |
| Hardness, Shore D | 65 | 65 | |
| Ball Indentation Hardness | 60.0 MPa | 8700 psi | ISO 2039-1 |
| Tensile Strength | 7.00 MPa | 1020 psi | at Yield; ISO 527-1/-2 |
| Elongation at Break | 15 % | 15 % | ISO 527-1/-2 |
| Elongation at Yield | 5.0 % | 5.0 % | ISO 527-1/-2 |
| Tensile Modulus | 1.75 GPa | 254 ksi | ISO 527-1/-2 |
| Flexural Yield Strength | 13.0 MPa | 1890 psi | |
| Compressive Strength | 12.0 MPa @Strain 1 % | 1740 psi @Strain 1 % | ISO 604 |
| 19.0 MPa @Strain 2 % | 2760 psi @Strain 2 % | ISO 604 | |
| 25.0 MPa @Strain 5 % | 3630 psi @Strain 5 % | ISO 604 | |
| K Factor (ISO) | 12 μm/km | 12 μm/km | |
| Charpy Impact Unnotched | 0.800 J/cm2 | 3.81 ft-lb/in2 | ISO 179-1/1eU |
| Charpy Impact, Notched | 0.450 J/cm2 | 2.14 ft-lb/in2 | ISO 179-1/1eA |
| Coefficient of Friction, Dynamic | 0.20 - 0.30 | 0.20 - 0.30 | |
| Limiting Pressure Velocity | 0.250 MPa-m/sec | 7140 psi-ft/min | at 1 m/s unlubricated |
| 0.400 MPa-m/sec | 11400 psi-ft/min | at 0.1 m/s unlubricated | |
| Electrical Properties | Metric | English | Comments |
| Volume Resistivity | >= 1.0e+13 ohm-cm | >= 1.0e+13 ohm-cm | IEC 60093 |
| Surface Resistivity per Square | >= 1.0e+13 ohm | >= 1.0e+13 ohm | IEC 60093 |
| Dielectric Strength | 11.0 kV/mm | 279 kV/in | |
| Thermal Properties | Metric | English | Comments |
| CTE, linear | 50.0 μm/m-°C @Temperature 23.0 - 100 °C | 27.8 μin/in-°F @Temperature 73.4 - 212 °F | |
| Thermal Conductivity | 0.770 W/m-K | 5.34 BTU-in/hr-ft2-°F | |
| Melting Point | 327 °C | 621 °F | DSC, 10°C/min.; ISO 11357-1/-3 |
| Maximum Service Temperature, Air | 260 °C | 500 °F | Continuous |
| Deflection Temperature at 1.8 MPa (264 psi) | 130 °C | 266 °F | ISO 75-1/-2 |
| Flammability, UL94 | V-0 | V-0 | |
| Oxygen Index | >= 95 % | >= 95 % | ISO 4589-1/-2 |
| Compliance Properties | Metric | English | Comments |
| 3A-Dairy | No | No | |
| European Food 1935/2004 | No | No | |
| FDA | No | No | |
| USP Class VI | No | No | |
| Chemical Resistance Properties | Metric | English | Comments |
| Acids, Strong (pH 1-3) | Acceptable | Acceptable | |
| Acids, Weak | Acceptable | Acceptable | |
| Alcohols | Acceptable | Acceptable | |
| Alkalies, Strong (pH 11-14) | Unacceptable | Unacceptable | |
| Alkalies, Weak | Acceptable | Acceptable | |
| Chlorinated Solvents | Acceptable | Acceptable | |
| Continuous Sunlight | Acceptable | Acceptable | |
| Hot Water / Steam | Limited | Limited | |
| Hydrocarbons - Aliphatic | Acceptable | Acceptable | |
| Hydrocarbons - Aromatic | Acceptable | Acceptable | |
| Inorganic Salt Solutions | Acceptable | Acceptable | |
| Ketones, Esters | Acceptable | Acceptable | |