- 密度 [g/cm3]: 0.033
- 吸水率 [%]: 0.06
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Density | 0.0330 g/cc | 0.00119 lb/in3 | ISO 845 | ||
| Water Absorption | 0.060 % | 0.060 % | ISO 2896 | ||
| 2.2 % | 2.2 % | ASTM 1056 | |||
| Mechanical Properties | Metric | English | Comments | ||
| Tensile Strength | 0.245 MPa | 35.5 psi | ISO 1798 | ||
| Elongation at Break | 88 % | 88 % | |||
| Compressive Yield Strength | 0.0600 MPa @Strain 25.0 % | 8.70 psi @Strain 25.0 % | ISO 7214 | ||
| Compression Set | 17 % @Time 79200 sec, Strain 50.0 % | 17 % @Time 22.0 hour, Strain 50.0 % | 0.5 hr recovery; ISO 7214 | ||
| Thermal Properties | Metric | English | Comments | ||
| Thermal Conductivity | 0.0330 W/m-K | 0.229 BTU-in/hr-ft2-°F | mean temp of 0°C; ISO 8301 | ||
| 0.0380 W/m-K | 0.264 BTU-in/hr-ft2-°F | mean temp of 40°C; DIN 52 612 | |||
| 0.0460 W/m-K | 0.319 BTU-in/hr-ft2-°F | mean temp of 80°C; ASTM C 518 | |||
| Maximum Service Temperature, Air | 110 °C | 230 °F | |||
| Descriptive Properties | |||||
| Flammability | Heat Release: FAR/CS 25.853, 2 min total | 39.8 kWmin/m2 at 25 mm | |||
| Heat Release: FAR/CS 25.853, Peak | 49.1 kW/m2 at 25 mm | ||||
| Radiant Heat Panel: FAR 25.856 | Pass at 3, 13, and 25 mm | ||||
| Smoke Density: ABD0031 | Pass at 3 and 13 mm | ||||
| Smoke Density: FAR/CS 25.853 | Pass at 3 and 13 mm | ||||
| Toxic Gas Emission: ABD0031 | Pass at 3 and 13 mm | ||||
| Vertical Bunsen Burner: FAR/CS 25.853 | Pass at 3 and 13 mm | ||||